Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Dceln Hhdevqbhlo Rsg Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Heidelberg Stahlfolder Folding units for first pocket is a machine manufactured by Heidelberg Stahlfolder, with a format of 520 mm. Currently stored in Germany, it includes one first station No. 3 gate fold, four folding pockets for Heidelberg Stahlfolder TI 52 first unit, one first station No. 2 gate fold, one first station No. 4 gate fold, and one first station No. 1 gate fold. The delivery terms are FCA. Format: 520 mm Equipment: 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit 1x 1.ST Nr. 1 gate fold 1x 1.ST Nr. 2 gate fold Dcjlovfxtujn Hhd Rsg 1x 1.ST Nr. 3 gate fold 1x 1.ST Nr. 4 gate fold

Year of construction: 2007, Condition: used, Case maker Hoerauf BDM Speed Year: 2007 The BDM Speed is a high speed casemaker with an output of 85 cases per minute, specially designed to meet the requirements of medium and large size companies, for the production of book cases with rigid or flexible spine, as well as one-piece cases for ring binders and letter files. Description: - Colour monitor - Automatic setting - Board pre stacking conveyor - Board magazin - Board cutter: KS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing quarter-bound cases in 2 passes - Pressing station Dcjln Hovcmiljhd Reg - Stacking delivery - Pump Palletiser Solema Cartesio Year: 2006 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system Hörauf (also known as Hoerauf or Horauf) Size range opened case (max): 680 x 380 mm Size range opened case (min): 190 x 130 mm Max. mechanical speed: Up to 85 cases/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2009, MBO T 530-1-53/4 F is a folding machine manufactured by MBO in 2009, with a format of 530 mm. Currently stored in Germany, it includes four pockets, a sheet counter, and a delivery system. Dcjljvfx D Tsn Hhd Rjg Format: 530 mm Equipment: 4 buckle plates delivery Sheet counter

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 Dceln Hhdjwdgfze Rog For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, The Stube Foerdertechnik GmbH 14 Tonnen Forklift is a machine with a format of 450 x 460 mm. It is currently in stock and located in Germany. This forklift has a lifting height of 225 cm and is powered by a Deutz 6-cylinder diesel engine. It features a duplex tire lifting mechanism and has dimensions of 360 cm in length, 200 cm in width, and 240 cm in installation height. The forklift weighs 18,700 kg and has a fork length of 250 cm and a width of 30 cm. The delivery terms are FCA. Format: 450 x 460 mm Equipment: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Djlsvfx E Don Hhd Rocg Fork length 250 cm width 30 cm

Condition: used, Year of construction: 1990, This Polar L-1000-G-3BF is a robust piece of equipment designed for handling heavy loads. Currently dismantled and located in Germany. With a maximum load capacity of 1000 kg and equipped with a pallet lifter, this model is well-suited for various industrial applications. Format: 100x140 cm Dceln Hhdovfx Tzs Rjg Equipment: Max. Load capacity: 1000 kg

Condition: used, Year of construction: 1998, The Mueller Martini Prima Amrys from 1998 is a fully equipped and highly efficient saddlestitcher, featuring 7 feeders, a cover feeder, inserting machine, labelling section, and a card gluer. It includes the Automatic Make Ready System (AMRYS), a three-knife trimmer, a Mueller Martini 227 inserting machine with 4 stations, and other optional components as Inkjet unit, and Mosca RO-TR-500. It reaches a maximum mechanical speed of 13,000 cycles per hour and handling sizes from 90 x 105 mm to 320 x 480 mm. Format: 320 x 480 mm Equipment: Equipment Dcoln Hhewcqygsd Rog Feeder Number of feeder: 7x 370 Cover feeder: 1x 1529 Card gluer: Yes Stitching unit Type: Prima Amrys 2x stitching heads AMRYS - Automatic Make Ready System Three knife trimmer Type: Mueller Martini 360 Delivery Type: Mueller Martini 310 CS-20 Serial number: 97.00900.05 Delivery direction: to the right Optional (available on request) Stacker InkJet System Wrapping unit Mailing & Sealing Machines Inserting Machine Type: Mueller Martini 227 Number of stations: 4x Technical Details Size min: 90 x 105 mm Size max: 320 x 480 mm Mechanical speed max: 13,000 cycles/h

Condition: used, Year of construction: 2014, The Heidelberg Stahlfolder Ti 52/4 KBi - SAF 56 is a versatile and compact folding machine designed for small to medium-sized print shops. It is a combi folding machine with 4 pockets and 1 folding knive, providing efficient and precise folding for various paper formats. Format: 520 x 840 mm Equipment: Feeder Mode: Flat pile feeder Type: Fi-52 Max. pile height: 690 mm Control Unit: CCT Digital Control Year: 2014 Serial number: 0-00422 Folding Units 1st unit Type: Ti 52 Pockets: 4x Pocket Type: standard folding pocket Pocket Configuration: manual Delewcqx Asn Hhd Recg Rollers Configuration: manual Roller condition: used condition Working width max: 520 mm Cross fold unit with 1x knife Noise Protection Hood Monitor Screen Delivery Delivery mode: Stream delivery Type: SAF 56 Year: 2014 Technical Details Sheet size max: 520 x 840 mm Sheet size min: 140 x 200 mm Max. mechanical speed: 180 m/min.

Condition: used, Year of construction: 1994, The Mathias Baeuerle CAS 524 SE, manufactured in 1994, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 520 x 720 mm and is currently located in Germany, available in storage. Format: 520 x 720 mm Equipment: 4 buckle plates Doljv Di Srjn Hhd Rscg vertical pile feeder 1 Knife

Condition: used, Year of construction: 2002, This Polar 78 ES paper cutter, manufactured in 2002, is currently in stock and located in Germany. It offers a cutting width of 780 mm and features a durable chrome-plated table for smooth material handling. The machine is equipped with a program system for precise operation and comes complete with two spare knives, a knife changing tool, a toolbox with standard tools, user manuals, and electrical schematics. Format: 780 mm Equipment: chrome-plated table program Djlov Rd H Rsn Hhd Recg 2 Spare knives Knife changing tool Toolbox with standard tools Instructions for use documents Electrical plans

Condition: used, Year of construction: 1990, This Wohlenberg 115 MCS 2 TV, built in 1990, is located in Germany and offers a solid solution for cutting operations with a width of 1150 mm. It features air-assisted side tables on both the left and right sides, improving handling and workflow efficiency. The machine comes complete with two knives and includes technical documentation, making it a ready-to-use addition to any print or finishing operation. Format: 1150 mm Equipment: Side table on the left with air Delnev Rp E Se Hhd Rocg side table on the right with air Comes with 2 knives, technical documentation

Condition: used, Year of construction: 2003, FKS TrimScor DC545 is a machine manufactured by FKS in 2003, with a format of 320 mm x 650 mm. Currently stored in Germany, it features creasing and cutting in a single operation, with a maximum width of 320 mm, suitable for paper ranging from 130 to 240 g. The delivery terms are FCA. Format: 320 mm x 650 mm Equipment: Creasing and cutting in one step For paper from 130 - 240 g Max. Width 320 mm Deln Hhevfx Dgsd Recg

Condition: used, Year of construction: 1997, Perfecta SHL 12 P pile lift is a machine manufactured by Perfecta in 1997, with a format of 800 x 600 mm. Currently stored in Germany, it has a maximum load capacity of 1000 kg and a maximum dimension of 800 x 600 mm. The delivery terms are FCA. Format: 800 x 600 mm Equipment: Max. Load capacity: 1000 kg Doln Hovfxr Rohd Rscg Max. Dimension: 800 x 600 mm

Condition: used, The ES 5040 21, manufactured by Italdibipack, is currently in stock and located in Germany. The machine is offered in its current condition as seen. The delivery terms are FCA (Free Carrier), which means the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Dcoln Hhsvfxq Hed Rog Format: Equipment: as is

Condition: used, Year of construction: 2006, The SL 12 P, manufactured by Perfecta in 2006, is currently in stock and located in Germany. This machine has a format of 1,050 x 1,450 mm and features angular boards, a side gauge, and a back panel that allow for manual restacking of the completed material after cutting. It has a maximum carrying capacity of 1,200 kg and a platform size of 1,050 x 1,450 mm. The maximum stroke is 890 mm. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods to the carrier appointed by the buyer at the seller's premises. Format: 1.050 x 1.450 mm Equipment: Angular boards - Side gauge and back panel allow to manually restack the completed material after cu Djln Hhdjvfx Aij Rocg Carrying capacity max: 1.200 kg Platform size: 1.050 x 1.450 mm Stroke max: 890 mm

Condition: used, Year of construction: 2025, The KMK ZLFM-800SJ Automatic Film Laminating Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 260 x 250 mm to a maximum of 780 x 1040 mm. It features an optional electrically heated powder removal mechanism, a feeder with the suction nozzle of the feeder head positioned 1150 mm above the ground, and a main laminating unit. The machine comes with a 2-year warranty and includes installation. Additional features include a stacker with the paper output roll positioned 890 mm above the ground, a cutting unit, and an automatic feeder mechanism for pre-stacking paper with a non-stop paper feeding device. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: min. 260 x 250 mm max 780 x 1040 mm Equipment: 6-8 weeks after ordering 2 year guarantee + installation Dcolovfxuxon Hhd Rjg Condition New machine Automatic Feeder: Pre-piled paper mechanism, non - stop paper feeding device (cycle paper feeding) Feeder: Suction nozzle of feeder head is 1150 mm from the ground. Stacker: Paper out roll of the stacker is 890 mm from the ground height. Powder removal mechanism (OPTIONAL) electric heating powder removal mechanism. Laminating main unit Cutting unit

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Djln Hhdsvphzij Rocg Format:

Condition: used, Year of construction: 2000, The OMMA JET LAM 1600 is a robust laminating machine designed for high-performance lamination. Manufactured by OMMA in 2000, this model is located in Germany, with pricing available upon request. The machine is in good condition with no damages and features a working width of 1600 mm. It can handle a maximum material thickness of 80 mm and has a power connection of 9.4 kW. Format: 1600 mm Equipment: Good condition without any damage Djln Hhdev Abkwj Rocg Working width: 1600mm Max. material thickness: 80mm Connected load: 9.4kW

Condition: used, The Elcos 108 Double head paper driller is a robust and efficient machine designed for simultaneous drilling operations. Equipped with two drilling heads, this machine enhances productivity by allowing two holes to be drilled at once. It is currently available in stock and located in Germany. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. The Elcos 108 is well-suited for various applications requiring precise and efficient paper drilling, making it a valuable addition to any production environment. Equipment: Two drilling heads. Dsln Hhsvfx Npsd Rscg

Condition: used, Year of construction: 2010, The Mailmaster 565HS, manufactured by KAS in 2010, is currently in stock and located in Germany. This machine is in good condition with no damages and is configured with FSFi for faster intake, featuring 6 attachment stations. It can handle envelope formats from DL to C5 and operates at a speed of up to 7,000 cycles per hour. The delivery terms are FCA. Equipment: Speed: bis zu 7.000 Takte/h Envelope formats: DL - C5 Configuration: FSFi (fast feed), 6 insert stations Good condition without any damage Dcjlnovfxqao Hhd Rjg

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: A 2 Dcoln Hhdsvphzpj Rog

Condition: used, Year of construction: 1997, The Lintec LPM 300 GT, manufactured in 1997 with the serial number 5016-1W, is a specialized printing machine designed for high-quality UV letterpress printing. Currently dismantled and located in Germany, this machine supports a 6-color UV letterpress printing process and can handle a maximum material width of 300 mm, with a maximum printing width of 280 mm. It is capable of printing lengths up to 280 x 240 mm and operates at a maximum speed of 7,200 impressions per hour, ensuring efficient production. The machine is equipped with a UV drying system featuring 6 GEW UV dryers to quickly cure the ink, and it includes 1 rotary die-cutting unit for precise cutting tasks. The integrated rewinder with a slitting function (5 knives) allows for efficient post-processing, while the unwinder with an end-position sensor ensures smooth material feeding. Additional equipment includes Rotometrics pressure control at the die-cutting station for accurate cutting, metal-based polymer printing plates for durability, and 11 magnetic printing cylinders for versatile printing options. This Lintec LPM 300 GT is well-suited for businesses requiring a reliable and specialized UV letterpress printing solution. Format: 300 mm Deln Hhowa Ayyed Rocg Equipment: Printing process: 6-color UV letterpress Maximum material width: 300 mm Maximum printing width: 280 mm Maximum print length (repeat): 280 x 240 mm Maximum speed: 7,200 impressions per hour UV drying system: 6 GEW UV dryers Die-cutting: 1 rotary die-cutting unit Rewinder: Integrated with slitting function (5 knives) Unwinder: With end-position sensor Additional equipment: Rotometrics pressure control at the die-cutting station Metal-based polymer printing plates 11 Magnetic printing cylinders

Condition: used, Year of construction: 1999, The MBO K 820-6 KTLT, manufactured in 1999, is a high-performance folding machine designed for efficient and precise folding tasks. With a format of 820 mm, this machine is currently in production and located in Germany. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. Dcelnovfxnfj Hhd Rsg This folding machine is equipped with several advanced features to enhance its functionality. It includes 2 knives and 6 pockets for versatile folding options, as well as a mobile knife for additional flexibility. The machine also features a vertical sheet delivery (SBPD) system for efficient output handling. These features make the MBO K 820-6 KTLT a reliable and versatile choice for various folding applications. Format: 820 mm Equipment: 6 bags 2 knives upright sheet delivery SBPD mobile knife

Condition: used, This Poege Letterpress is a historic museum piece, manufactured in 1900. Currently in storage and located in Germany, this item is a significant artifact from the early days of printing technology. This piece is ideal for collectors, museums, or educational institutions focused on preserving and showcasing the evolution of printing machinery. Format: Dceln Hhdsvfx Tno Rog Equipment: Letterpress, perfect for Collectors or Museum