Used surface finishing machines for sale (172)

Condition: excellent (used), Sandblasting machine De Laurentiis model 100 TS year 2002 Hsdjrxr Rgepfx Adweng

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Hedpfswm Elfsx Adwjng Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Year of construction: 2016, condition: ready for operation (used), A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible. Hnsdpfexxzhqjx Adwog

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,985 h, machine/vehicle number: L18_1463, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: diode laser, laser source manufacturer: CleanLaser, laser source model: CL 300, laser hours: 721 h, laser power: 300 W, laser wavelength: 1,064 nm, working length: 500 mm, working width: 900 mm, working height: 40 mm, compressed air connection: 6 bar, overall weight: 2,300 kg, total length: 4,500 mm, total width: 3,300 mm, total height: 2,215 mm, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The system on offer is a laser cleaning cell manufactured by cleanLASER (model cleanCELL 2220), designed for industrial cleaning applications. In our case, it was used for cleaning stainless steel parts prior to adhesive bonding. The cell was in operation until the first quarter of 2024. The cell is equipped with a 300-watt diode-pumped ND:YAG laser, enabling precise and contactless surface cleaning. Hedpfx Ajxxvviedweng Components & Features: - Workstation: The cleanCELL 2220 features an X-Y-Z axis system for precise laser head positioning, two workstations, and six workpiece carriers. - Conveyor System: A BOSCH Rexroth conveyor system ensures the transportation of workpieces. - Peripheral Equipment: The unit includes a TEKA extraction system (LFE-301) for removing particles and a KLH cooling system for laser temperature regulation. - Safety: Full enclosure ensures the system meets Laser Safety Class 1 during operation. A spark detection system is also integrated. Documentation: Documentation can be provided upon request. Maintenance & Condition: The system was serviced annually, with the last maintenance performed on 05.01.2024. In the past, the resonator was replaced under warranty due to a loss in power output. Currently, the system has been relocated from its original position due to space constraints and is not connected to any power supply. Spare Parts: The system comes with a spare parts package containing various valves, timing belts, filter cartridges, desiccant, activated carbon filters, etc. Handover & Collection: Handover of the item takes place at the seller's business premises. After clarification of the technical details regarding disassembly, the item will be available for collection at that location. Disassembly and transportation are to be carried out by the buyer at the buyer's own expense and risk. The buyer is required to comply with the “Instructions and Regulations for External Companies” (information available upon request). The seller will issue an invoice based on the signed purchase contract. Handover of the item will occur upon receipt of a payment confirmation.

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling and cleaning of materials and components. These are absolute professional devices. Ideal for vintage car restorations and in the automotive and metal and plastics industry. We are happy to help you find a solution and can test your project here in the factory. Hnodpfx Aoiq I Nlsdwog The handling of the machines is easy to learn.

Year of construction: 2023, condition: used, functionality: fully functional, Facility dimensions (width, length, height) 15,000 x 6,000 x 5,000 mm Facility volume (average) 450 m3 Hnedpsv Hfftsfx Adweg Facility Structure Steel and Sandwich Panel Inner Wall Protection Coating Special Textile Containing Sandblasting Rubber Main Door 2 pieces Emergency Exit Door 2 pieces Floor Grids 3 rows SANDBLASTING FACILITY FILTRATION SYSTEM Filter Unit Total Air Volume 25,000m3/h Filter type Cartridge Number of filters 12 pieces Filter Surface area 252m2 Remaining dust value

Condition: ready for operation (used), Walther Trowal TT 280 Centrifugal Finishing Machine with Peel Centrifuge ZA 06 Walther Trowal TT 280 Centrifugal Finishing Machine: Gross volume: 280 liters Power: 15 kW Walther Trowal ZA 06 Peel Centrifuge: Cleaning capacity: 2,000 l per hour Drum sludge volume: 28 l Centrifugal force: 2,417 g Dirty water tank: 1,500 liters You are welcome to schedule an inspection. We can also organise affordable shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can be issued, provided a valid VAT identification number is supplied. Hnedpoxvplfefx Adwog Subject to prior sale. Visit our shop to view this and our other offers. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from the technical data and errors in item descriptions may occur and are subject to change.

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Hsdpfsnl Ekrox Adwsng Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible. Hnedpjxwcvgofx Adwjg

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: LAS 23 mit integrierter Absaugung, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional 30 W) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg Hnodpfevyc Rmjx Adwog - fiber optic cable approx. 2,50 m - Extraction optional

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling, and cleaning of materials and components. These are absolute professional-grade machines. Ideal for classic car restorations as well as use in the automotive, metal, and plastics industries. We are happy to assist you in finding the right solution and can test your application here at our factory. The operation of these machines is easy to learn. Hnjdpfxjwzv Dus Adweg

Year of construction: 2023, condition: used, functionality: fully functional, Facility dimensions (width, length, height): 15,000 x 6,000 x 5,000 mm Facility volume (average): 450 m3 Facility structure Steel and Sandwich panel Inner wall protection coating Special transparent coating Main door 2 pieces Emergency exit door 2 pieces Floor grilles 2 rows PAINTING FACILITY FILTRATION SYSTEM Fan flow rate 72,000m3/h Motor protection class IE 3 Fan standard Ex-proof Certification Atex Filtration Technique Filtered from the floor Air speed (average) 0.25 – 0.30 m/sn Main inlet and outlet filters EU 4 Ceiling filter type EU 5 Wall filter type EU 3 Hsdpfxev Hfdie Adwong ELECTRICAL CONTROL PANEL AND AUTOMATION Control software PLC Control Panel Touch screen Sealing IP 54 Switchgear materials Siemens PLC Delta Heat measurement Included in the system Data Collection Data logger System control Automatic Filter occupancy measurement Differential pressure sensor Emergency stop buttons In-plant and Machine Room Fire detection sensor Communication to factory main system Personnel safety Audible, Light notification Fault notification On screen, audible, light Technical Support module Remote access

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Hedpfjxpiw Uox Adweng Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Year of construction: 2023, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Hnsdoi D Digjpfx Adweg Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2024, condition: ready for operation (used), An originally packaged Ecoclean spray-flood cleaning system with a vacuum-tight working chamber is available. Working chamber diameter 1: 650mm, working chamber diameter 2: 750mm, max. basket dimensions 1 X/Y/Z: 670mm/480mm/300mm, max. basket dimensions 2 X/Y/Z: 670mm/480mm/400mm, max. batch weight: 150kg, max. door opening angle: 135°, max. spray pressure: 2bar, filling volume: approx. 1750l. Machine dimensions X/Y/Z: approx. 3450mm/2000mm/2700mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. The machine has never been unpacked. Hedpsxwcvajfx Adwjng

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile Hedpfou Smd Ejx Adweng - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 534/39, type of input current: three-phase, power: 40 kW (54.38 HP), Runs on modified alcohol Hnjdpfx Adoxvrddoweg

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V Hnedst Ity Dspfx Adweg

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 41357/07, For sale: automatic centrifuge Rösler Z 800 HA-Turbo-Floc, designed for cleaning and recycling process fluids (water, emulsions, baths). The machine efficiently separates solid particles and sludge from liquids, thus extending the service life of process media and reducing operating costs. ✅ Capacity up to 800 l/h Hsdsxl Hpmjpfx Adwsng ✅ Automatic operation ✅ Ideal for electroplating plants, paint shops, and machining operations ✅ Reliable German manufacturer In very good condition.

Condition: good (used), Polishing Bock Brush width 50 mm Hnsdpfsd Am Dlsx Adwog Space required: B. 1050 x T. 540 x H 560 mm

Year of construction: 2018, condition: ready for operation (used), Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible. Hodpfx Adextprteweng

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm Hjdexd A I Aopfx Adwjng - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Hnodpfx Asp S Tlhsdwjg Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, type of cooling: air, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm Hnjdpfx Adjxd Az Njwsg - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status Hnjdeunh H Sspfx Adwsg - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg