Used Tool grinders for sale (194)

Condition: excellent (used), Tacchella Macchine grinder type 40LR in very clean condition. Specifications: Longitudinal travel x axis 400 mm Cross travel y axis 250 mm Coloivg E Hsirabdjrb Clearance between worktable and spindle axis 375 mm Wheel speed 3000/6000 rpm Wheel dimension 150x20 mm Weight 800 Kg

Condition: ready for operation (used), Year of construction: 2020, A modernized Klingelnberg SNC 31 CNC 6-Axis Tool Grinding ernizations: new belt drives, new flanges, new servo motors and new couplings in all axes. Hydraulics: new drive pump, new motor, new hydraulic hoses, original lubricant tallation of a new control cabin with CNC (Siemens 840D sl) and new electrical construction (VDE).Detailed information about the modernization on h filter system and CO2 extinguishing system (Dangelmaier).On-site inspection is possible. Cjliery T Txsrabdorb

Condition: used, Year of construction: 2003, Functionality: fully functional, Motion Axes: X axis: 380 mm Y axis: 240 mm Z axis: 245 mm A axis (inclined): -15° to +25° B axis (rotational): +135° C axis (rotational): available Rapid traverse speed (X, Y, Z): 20 m/min High speed spindle: up to 50,000 rpm Manual clamping system: for lathe tool holders Pek clamping system: by mold Crolevy T T Soirabdsb Automation: with Adept robot Maximum grinding wheel diameter: 300 mm Peak power: 7.5 kW Grinding spindle speed: 200-9,000 rpm Cooling systems: available Accuracy: Linear resolution: 0.0001 mm Axial resolution: 0.001° Power consumption: approx. 16 kVA at 400 V/50 Hz Total weight (including robot cell): approx. 5,000 kg Tool data: Automatic clamping system for interchangeable inserts Minimum inscribed circle of the insert: 3 mm Maximum circumscribed circle of the insert: 50 mm Automatic clamping system for pins: diameter 1.6-10 mm

Condition: excellent (used), Vertical saw for olisow automatic feeder Colirasu Hugwsbdorb

Condition: good (used), Filter system for cleaning grinding oil in carbide processing. Csloqbup Toirabdsrb The system was in operation until recently.

Condition: used, CNC Univ. tool grinding machine SCHÜTTE type BU 400 CNC 4 serial no.: 03-02 year of construction 1990 Crelijd Rmcmorabdjb Machine not ready for operation - electrically without function - without CNC control 4-axis (X, Y, Z and R) Table clamping surface 1300 x 250 mm Center width 700 mm Center height 155 mm Sanding length (X-axis) max. 400 mm Sanding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Mains connection 380 Volt, 50 Hz, 25 Amp. - CNC control dismantled Space requirement L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control missing. good condition, ideal for control conversion

Year of construction: 2002, Condition: excellent (used), datas as a plate no:660150 Crelirabsmxkyrodsb

Condition: ready for operation (used), Year of construction: 2007, Spindle power: 22kW, grinding wheel diameter: 762mm, grinding wheel speed: 3000rpm, max. punching size: 150mm. Creliroua Dq Nsabdsb

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, General Data Measurements width 3000 Measurements depth 4000 Measurements height 3000 Machine weight 9000 Control unit Brand Siemens Model Sinumerik 840D Main Drive Spindle speed range 2000 - 8000 Spindle motor power 12 kw Movement X-Axis Movement 400 mm Y-Axis Movement 270 mm Z-Axis Movement 250mm A-Axis Movement 360º C-Axis Movement -230°/ +70° Table Outer length 1000 mm Outer width 270 mm Additional equipment Fanuc Model M-10iA Robotic Loader Robotic control: SYSTEMR-30/A Control Pneumatic cylinder tension/compression clamping force up to 17000 N This 5-axis HAAS Multigrind AF grinding machine was manufactured in 2010. It features a robust Siemens Sinumerik 840D CNC control, a grinding spindle speed range of 2,000 to 8,000 rpm, and a spindle power of 12 kW. The machine includes a Fanuc Model M-10iA Robotic Loader for enhanced automation and efficiency. Ideal for complex grinding tasks, the HAAS Multigrind AF machine we have for sale is a significant asset for precision machining. Contact us for further details regarding this grinding machine. Creljvy Hl Ieirabdeb Application Types Grinding

Year of construction: 1994, Condition: good (used), branded tool grinding machine, Spinner type SM 100 Crolironp Itujabdsb - Sharpening machine for milling cutters - max diameter : 18 [mm] - mini diameter : 0,5 [mm] - Weight : approx. 120 [kg]

Condition: as good as new (ex-display), Used universal tool and cutter grinding machine US 2305 JUNGNER Sweden. 2018 general overhauled. Complete rebuilded from scratch as you can see on photos. As good as new or better ;-). Lot of accessories. Tested under power. Ready to delivery, installation and work. Complete offer on request. Crjlirasd At Rbsbdjb

Condition: used, Twist drill grinding machine, twist drill grinding machine NSC SCHLUMBERGER Manufacturer: NSC SCHLUMBERGER (France) Type AF1 No. 1049 Year of manufacture 1974 Grinding range Ø 10-80 mm Tool length max. 720 mm Point angle 80-160 º Tool speed with 2 cutting edges 40 rpm Tool speed with 3 cutting edges 26 rpm Tool speed with 4 cutting edges 20 rpm Feed rate 0.01- 0.1 mm/rev. 10 steps Grinding wheel diameter max. 230 mm Grinding wheel speed 2650 rpm. Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Precision six-jaw chuck REISHAUER Ø 240 mm, 6-80 mm clamping range - Dressing device with dressing diamond for dressing the grinding wheel - For grinding standard drills and other tools with 2, 3 or 4 cutting edges Crsledzp T Usirabdob (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - for left- and right-cutting drilling tools, with gear changeover - relief grinding, clearance angle variably adjustable - Coolant device in the machine base frame Space requirement L x W x H 1400 x 800 x 1450 mm Weight approx. 800 kg good condition

Condition: good (used), Year of construction: 2007, 1 used CNC tool grinding machine make Schneeberger type Corvus GDS 650 year of construction 2007 CNC-control : FANUC 160i Software: Quinto 4.3 Software active Options number : 1, 2, 19, 21, 22, 30, 31, 32, 35 . - Fanuc loading robot - Coolant system Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Crsliou A Dn Norabdjb Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 mounting Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm width 1915 mm height 2190 mm Weight 8500 kg U axle is fitted with steady rest, clamping cylinder and counter point 13 disk holders 6 pallet loaders (diameter 3 to 32mm) 64 plastic bushes Technical data Errors excepted

Condition: ready for operation (used), Year of construction: 1999, Grinding wheel diameter: 200mm, max. grinding diameter/length: 150mm/760mm, travel X/Y/Z: 760mm/460mm/360mm, swivel range A/C: 270°/360°, speed: 3000rpm. Dimensions X/Y/Z: approx. 2200mm/2100mm/2700mm, weight: approx. 6500kg. Celsua Dn Uoirabdjrb

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Colirabot Hw Nmodjrb Profile Tool Grinder for Chamfer Angles, accessories

Condition: used, max. grinding diameter 152 mm grinding length 305 mm workpiece length ? mm total power requirement 380 W weight of the machine ca. 150 kg dimensions of the machine ca. 1 x 0,6 x 1.4 m No. 0439 Tool sharpening machine CLARKSON Mark-I Cjliraotr U Sxobdjrb Working area: diameter 152 x 305 Drive: .38 kW

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 Creliraoqd N S Debdsb >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: used, Drill grinding machine GÜHRING type SS 15 make no. 909 year of construction approx. 1977 drill diameter max. 40 mm grinding wheel diameter right 300 mm grinding wheel diameter left 250 mm grinding wheel width 40 mm grinding spindle speed approx. 2800 rpm motor power approx. 2,2 kW Mains connection 380 Volt, 50 Hz - center angle infinitely variable - Pointing device - gear motor for height oscillation in front of the cup wheel Crelisdzp Tborabdjb - diamond dressing holder - various drill bit holders - coolant device space requirement L x W x H 1200 x 950 x 1550 mm weight approx. 1150 kg

Condition: used, x-axis 340 mm y-axis 300 mm Celirabjtvbmzsdorb grinding length 320 mm workpiece length 450 mm turning speeds 3650- 6100 U/min engine output kW swivel movement 360 Grad dimensions 1,0 x 0,9 x 1,5 m weight of the machine ca. 0,7 t used tool grinder - clamping vice - machine light

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm Cslirabjt Hwr Usdsrb table length 600 mm table width 400 mm total power requirement 2 kW weight of the machine ca. 1500 kg

Condition: used, Year of construction: 1987, max. grinding diameter - mm grinding length - mm workpiece length - mm total power requirement 0,75 / 1,2 kW weight of the machine ca. 0,250 t dimensions of the machine ca. 1*1*1,2 m No. 5375: Universal tool grinding machine, SIMON, type L 15 with 1400 / 2800 min-1 Crslirabetqqa Nodjb Dimensions 1300 x 1000 x 1500 mm Drive power: ,75/1,25 kW

Year of construction: 1992, Condition: excellent (used), Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Crolirsm E T Anoabdsb Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: used, Graver grinder PARPAS type AU make no. 854/36 year of construction 1971 grinding wheel diameter 100 mm grinding spindle speed approx. 3500 rpm. motor power approx. 0,55 kW Mains connection 380 Volt, 50 Hz - collet chuck (system DECKEL with S20x2) - collet chuck Ø 15,0 mm - Diamond grinding wheel dresser for grinding wheel end face Space requirement L x W x H 700 x 350 x 450 mm Croliredzp T Tsabdsb weight approx. 80 kg good condition

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm Colirast Hwpaebdsrb grinding length 0 mm workpiece length 970 mm total power requirement 12 kW weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) Crsliraonzt A Hsbdjb - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition