Used walking floor / moving floor semitrailers for sale (170)

Condition: used, first registration: 10/2011, Year of construction: 2011, REISCH 82 m³ Moving Floor Semi-Trailer Walkingfloor with Grain Hopper FLOOR: IN VERY GOOD CONDITION! ● Body: Full aluminum ● Chassis: Steel ● Capacity: 82 m³ ● 3 x BPW ECO Plus axles ● Air suspension ● Lift axle ● Raise/lower system ● Disc brakes ● Platform ● Rear grain hopper and slide ● Rolling tarpaulin ● Aluminum sliding wall ● Hydraulic locking ● WABCO Smartboard ● ABS ● ALCOA rims ● Tyres: 385/65 R 22.5 ● GVW: 35,000 kg ● Curb weight: 7,700 kg! Predpeyutyrsfx Abpja ● Overall length: 14,050 mm ● Internal dimensions (incl. grain hopper): 12,600 x 2,470 x 2,510 mm - German trailer! - 1st owner! - TÜV / roadworthiness test: new! Errors and prior sale excepted! = More information = Payload: 1 kg For more information, contact Joannis Arpantzanis or Kai Bühler.

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side Psdpov Dz Ixjfx Abpera RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 01/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor semi-trailer K100 92 m³ 10 mm Floor, New MOT (TÜV) General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross permitted weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle version: fixed, fixed, fixed ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Coupling height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD off-road axles * All axles fixed * Disc brakes Ø 430 mm * 10-bolt wheel mount * Air suspension with standard control console (left in front of axles) * Lift axle, fully automatic via EBS * Including hill start assist (3x brakes) * Radio remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Body * Closed sidewalls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods * One locking rod per door * Top rail made of steel, swings out left and right * Platform at front bulkhead * Ladder at front bulkhead, left and right * Standard roof bows Ø 60.3 mm (4 pcs) * Bow spacing: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 white aluminium) * Tarpaulin supports, 3-position (4 pcs) * Lashing straps (4 pcs) ----Floor / Walking Floor * Cargofloor system CF-500 SL-C * Electric control * Corrugated aluminium floorboards 10 mm (21 boards) * Fixed front wall * Stainless steel plate at rear under floor ----Attachments * JOST landing legs with compensating device * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 L water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long ladder with extendable rear step and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reverse lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations * LED work lights at rear (radio remote controlled) * LED work lights near landing legs (radio remote controlled) * LED LCG-2 switch unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin electrical socket * Knapen Trailers V1 radio remote control * Hydraulic connections centred on front wall (vertical) Prodpfx Aboyrvt Ajpoa * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections present * Acoustic reverse warning (manually adjustable) ----Paintwork * Body in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted If you have any further questions, I am at your disposal.

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) Podpjyrlcgsfx Abpora 1st axle lift axle Aluminum air tanks 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Toolbox rear left Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2015, next inspection (TÜV): 05/2026, total width: 2,550 mm, Equipment: ABS, German semi-trailer 1 owner Walking floor Hydraulic protective tarpaulin over the trailer Hydraulic tailgate Lifting axle Prsdpsym Hypjfx Abpsa

Condition: good (used), functionality: fully functional, machine/vehicle number: VAVJS1339RH529050, empty load weight: 7,750 kg, maximum load weight: 31,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2024, Equipment: ABS, our vehicle number #31042 3x SAF axles Psdpszp Hxcjfx Abpora Tire size 385/65 R 22.5 Permissible total weight 39,000 kg Payload 31,250 kg Unladen weight 7,750 kg Body dimensions i.e. L: 13,400 mm W: 2,470 mm H: 2,750 mm V: 89 m³ Color Pure white RAL 9010 Mileage 119,995 km Lift axle A1 + A3 Portal doors Disc brake Cargo Floor XD X-treme Durable, 7 mm electric roll cover "Quick TOP" Cleaning door front left Moving wall simple external twist locks Alcoa DuraBright EVO aluminum rims Wabco Smart Board RSS (Roll-over Stability Support) ABS/EBS Raise/Lower Telematics "LOCAL TRAC" Tire pressure monitoring Rear view camera Remote control pneumatic door locking Jost fifth wheel LASi EN 12642 XL Forklift accessible, 8 tons Side protective cover left Platform with ladder LED lighting various accessories Protective flap for rear lights Side UFS (Underride Protection System) 2x W-box 1x water tank Broom holder NATO canister Financing possible upon request!!!

Condition: used, maximum load weight: 31,335 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 01/2026, loading space volume: 92 m³, Equipment: ABS, Sliding floor trailer with conical trough design, 92 m³ volume, 385/65 tires, ABS, ESP, 3x9 t SAF B9-22S Intradisc CD IO37 axles with 22.5 inch (430 x 45) disc brakes, ET 120 2040/1200; 9 t BPW SRBF Eco Air axle with 22.5 inch Eco Disc TS2 disc brakes ET 120; Wabco braking system with control box; lift axle on the first axle; automatic raising and lowering / starting aid controlled via EBS; Rectus 26KA air connection; 6x steel rims 22.5x11.75 inch ET120; Europoint 3 Hybrid lighting; 2x LED work lights mounted inside, in the upper corner of the front wall; floor: aluminum, 21-plank, 8 mm, smooth surface; hydraulic connection at front wall; radio remote control; ladder on the right of the front wall or on the front wall door; 12 pairs of lashing rings embedded in the side floor profiles in pairs; 2x round 80 mm bows (not swiveling) + 1x round 50 mm front + 1x round 50 mm rear; wear plates left/right at the rear section inside, aluminum 1250x2500x3mm; 2 rail cleaners made of plastic, attached to the carriage with a chain; plastic toolbox; roll tarp with tension belt; foldable A-board (rear side in body color white); side underrun protection with plastic plate; Rollfix. Psdozp Tgtspfx Abpera

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, suspension: air, tire size: 385/65R22.5, color: grey, Year of construction: 2015, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Further Information = Year of manufacture: 2015 Axle brand: JOST Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65R22.5; Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 2: Tire size: 385/65R22.5; Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Pjdpfx Aszqtwnsbpora Rear axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Unladen weight: 8,010 kg Please contact Bob Beukers for further information.

Condition: used, empty load weight: 7,950 kg, maximum load weight: 28,050 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2014, next inspection (TÜV): 10/2026, loading space volume: 92 m³, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | Knapen K200 Sliding Floor Trailer | SAF axles with disc brakes | Remote control | 7,950 kg unladen weight | Roller shutter, toolbox | 10 mm floor | Aluminum rims | Tires 385/65R22.5 | TÜV valid until 10/26 | Subject to errors, typos, and prior sale. Prsdpfezd D Aujx Abpea

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2018, suspension: air, tire size: 385/65R22.5, color: white, Year of construction: 2018, Tire size: 385/65R22.5 Axle brand: JOST Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Unladen weight: 7,950 kg Pedpfox Hgwvsx Abpera Please contact Bob Beukers for further information.

Condition: used, axle configuration: 3 axles, first registration: 03/2005, loading space length: 11,200 mm, loading space width: 2,250 mm, loading space height: 2,260 mm, total length: 13,100 mm, total width: 2,550 mm, total height: 3,700 mm, tire size: 385/65R22.5, tire condition: 30 %, color: white, Year of construction: 2005, Equipment: ABS, Tire size: 385/65R22.5 Prsdpfx Abszpvyvjpsa Tire tread: 30% Rear axle 1: Reduction: single reduction Rear axle 2: Reduction: single reduction Rear axle 3: Reduction: single reduction Unladen weight: 6,400 kg Payload: 35,600 kg GVW: 42,000 kg Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - E-mail: - Website:

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead Prodpszn Drdefx Abpja * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 06/2027, Fifth wheel height 1,150 mm, hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male threaded pressure, 1'' female threaded return line. Axles: BPW On Road Eco Air, lift axle on axle 1, EBS 2S/2M KNORR, JOST steel fifth wheel, closed side underrun protection painted RAL 9010 white, 2 LED work lights behind axle 3 and in front of support legs, 1 x LED work light in the interior, front top, steel rims with black wheel hubs, 6 kg fire extinguisher, 3-meter ladder, wireless remote control for ground, shovel and broom holder, 2 toolboxes in the overhang, 15-meter air hose with hydraulic reel and gun, hydraulic hoses 4400 mm, self-supporting chassis, aluminum body 3/2 mm, walkway on the front with 2 ladders, door in the front wall on the left with ladder, floor type 10 mm, aluminum mobile wall with tarpaulin 3800 g and rail cleaner, rear doors with two integrated locking rods each, 18 mm, reinforced door seals, rear upper cross member can be unlocked on the right side by means of a pin, pneumatic door release, white roof tarpaulin 650 g with lateral reinforcement 200 g on 600 mm, 12 pairs of lashing rings, wear plates on rear side walls 3 x 1.5 m, lashing straps integrated into the side wall with stainless steel ratchets, side protection tarpaulin RAL 7038 left. Pedpsyw Dx Eofx Abpjra

Condition: used, maximum load weight: 27,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 04/2027, Saddle height 1,150 mm, hydraulic system: 110 l/min, 225 bar, connections on front wall: 1'' male threaded pressure, 1'' female threaded return line. Axles: BPW On Road Eco Air, lift axle on axle 1, EBS 2S/2M KNORR, JOST steel fifth wheel, closed side impact protection painted RAL 9005 black, 2 LED work lights behind the 3rd axle and in front of the support legs, 1x LED work light in the interior, front, upper. Steel rims with black wheel hubs, 6 kg fire extinguisher, 3-meter ladder, wireless remote control for the ground, shovel and broom holder, 2 toolboxes in the overhang, 15-meter air hose with hydraulic reel and gun, hydraulic hoses 4400 mm, self-supporting chassis, aluminum body 3/2 mm, walkway on front end with 2 ladders, door in front wall, left side, with ladder, floor type 10 mm, aluminum side wall with tarpaulin 3800 g and rail cleaner, rear doors with two integrated locking bars (18 mm each), reinforced door seals, rear upper crossbeam can be unlocked on the right side by means of a pin, pneumatic door release, black roof tarpaulin 650 g with side reinforcement 200 g on 600 mm, 12 pairs of lashing eyes, wear plates on side walls at the rear 3 x 1.5 m, black lashing straps integrated into the side wall with stainless steel ratchets, side protection tarpaulin RAL 7038, left side. Predpfxoyw Dxxe Abpsa

Condition: new, maximum load weight: 28,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand-new Knapen moving floor trailer K 100 A5060, 92 m³ * BPW axles * First axle configured as a lift axle * Air suspension * Disc brakes * ABS/EBS * OptiTire tire pressure monitoring system * 385/65 R22.5 tires * Gear support winches with push compensation * Plastic toolbox Predpfsyhtn Nsx Abpja * 10 mm floor, 21 planks * Stainless steel wear plate under the floor * Radio remote control for floor, lift axle, and auxiliary headlights * Round bows * Manual rolling tarpaulin * 3-position tarpaulin supports * 1 pair of red LED lights on the rear bow * Side marker lights with indicator function * Reverse warning system * 6 additional reversing lights: at the landing gears, behind the last axle, and on the lighting bracket * Foldable and painted A-plate on the left rear door * Tarpaulin color similar to RAL 9006 * Body painted in RAL 7011 iron grey * Chassis galvanized, not painted !!! The stated sale price is fixed ex works at Knapen Trailers in NL-Deurne !!!

Condition: used, functionality: fully functional, machine/vehicle number: ...630, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved. Prjdsy Ihu Sspfx Abpea

Condition: used, functionality: fully functional, machine/vehicle number: ...634, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! ===== 4 units available! ===== Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 01/2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross vehicle weight: 34,000 kg Technical max. total weight: 39,000 kg Podpfx Aoy Ih A Njbpsra - Robust, wear-resistant L-shaped steel floor profiles -- STEEL FLOOR -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous aluminium wear plates on the interior sides -- Aluminium body -- Portal doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Load protection slat -- Standing platform at the front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 (tread approx. 70% / 80% / 90%) -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Want to trade in your used vehicle? ...If we reach an agreement, we are happy to accept it in part exchange. This offer is non-binding and subject to prior sale. Errors and interim sale reserved.

Condition: good (used), empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Type: J-Series S1 First registration: 03/2022 Tare weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible gross weight: 39,000 kg Prjdpfsvx E N Aox Abpea - Robust and wear-resistant L-shaped steel floor profiles! -- STEEL FLOOR! -- Aluminium chassis -- Volume: approx. 92 m³ -- Reinforced walls, continuous interior side aluminium wear plates -- Aluminium body -- Swing rear doors -- ABS/EBS -- SAF axles -- Lift axle -- Disc brakes -- Air suspension -- Sliding tarpaulin -- Standing platform at front wall -- Lifting and lowering device -- Radio remote control -- Toolbox -- Underrun protection -- Spare wheel holder -- Tyres: 385/65 R22.5 Tread approx. 70% / 80% / 90% -- etc. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We handle all customs procedures for you. Looking to trade in your used trailer? We will gladly accept it on trade-in upon agreement. This offer is subject to change and non-binding. Errors and prior sale excepted.

Condition: good (used), functionality: fully functional, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR Pedpfx Asym En Sebpora STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Model: J-Series S1 First registration: 03.2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible total weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles - STEEL FLOOR - ALUMINIUM chassis - Volume: approx. 92 m³ - Reinforced walls, continuous aluminium wear plates along the interior sides - Aluminium body - Portal doors - ABS/EBS - SAF axles - Lift axle - Disc brakes - Air suspension - Sliding roof tarpaulin - Standing platform at front wall - Hydraulic lifting and lowering system - Radio remote control - Toolbox - Underrun protection - Spare wheel holder - Tyres: 385/65 R22.5; tread approx. 70% / 80% / 90% - etc. Would you like to visit us? We offer a free pick-up service from Linz train station (4020 Linz). We handle all customs formalities for you. Want to trade in your current vehicle? If we reach an agreement, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: used, empty load weight: 8,050 kg, maximum load weight: 30,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schwarzmüller moving floor S1 J series | Hydraulic connections front wall | SAF axles with disc brakes | Tool box, spare wheel holder | 8050 kg tare weight | Aluminum rims | Radio remote control | Tires: 385/65 R22.5 | 92m³ | Subject to errors and prior sale. Prsdpfx Abjvialtjpja

Condition: used, axle configuration: 3 axles, first registration: 03/2020, tire size: 385/65R22.5, color: grey, Year of construction: 2020, Equipment: ABS, = Additional options and accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Further information = Prjdpfx Aboypb S Sjpsa Year of manufacture: 2020 Tyre size: 385/65R22.5 Axle brand: BPW EAC HD Rear axle 1: Lift axle Rear axle 2: Lift axle Unladen weight: 8,100 kg Please contact Bob Beukers for more information.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2018, suspension: air, tire size: 385/65R22.5, wheelbase: 9,110 mm, color: grey, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Further Information = Axle configuration Tire size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 7,690 kg Payload: 34,310 kg GVW: 42,000 kg Maintenance APK (Technical Inspection): valid until 10/2026 Identification License plate: OR-35-KJ Further Information Please contact Bob Beukers for more information. Pedpfozd Aiysx Abpora

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 07/2027, Hydraulic hoses 4400 mm, 2x T'Edbro couplings, screw fittings, pressure 1", return 1". 3 x 9 ton BPW OFF Road axles, 1st axle as lift axle, axles center-mounted with axle load indicator. 6-piece tires 385/65 R 22.5, steel rims 11.75 x 22.5 / ET 0, disc brakes ø 430 mm, mechanical landing gears, foldable SSV, toolbox with triple-lock system. Aluminum superstructure 3/2, standing platform with ladder access on the left, floor profile type 10, CLEENSWEEP separation tarp with hydraulic drive at the front wall, hydraulic Ecotop cover. 3 x 9 ton BPW OFF Road axles, disc brakes ø 430 mm, axles center-mounted with axle load indicator, steel rims 11.75 x 22.5 / ET 0. Prodpjynp S Rjfx Abpoa

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum structure with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering mechanism, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gears, manufacturer: Alu-Leg, 2 x 10 ton support load, swivel feet for air suspension. Braking System According to E.E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines, with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpins, 1 LED work spotlight inside at the front left, operated from the outside. Psdpfx Absy U Syrspera Body/Tipping Body - Body fully welded inside Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a tapered design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 4 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar lining" for complete discharge, lateral brush seal and additional Kevlar lining on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, or without hydraulic hoses. Accessories PVC mud flaps w

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Prodpfx Ajgcw Riobpea Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi