Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Bodpfx As Agvnkendedi Retrofit capability for max. 2 additional LLK outputs

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Bodjz S Egijpfx Andodi Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: good (used), Year of construction: 2016, Welding fume extraction system F-84, manufactured in 2016, for sale! A welding fume extraction system, type F-84, manufactured in 2016, is for sale. The system is sold with a comprehensive range of accessories. Included in the scope of delivery: * Various exhaust pipes * Several extraction arms * Other accessories Bedpfx Ane Ahq E Isdjdi The system is ideally suited for use in workshops and industrial facilities. If you are interested or have any questions, please do not hesitate to contact us!

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis KOIKE Gammatec 1530 plasma cutting machine was manufactured in 2018. It features an effective cutting area of 3,000 × 1,500 mm and a maximum cutting thickness of 30 mm for steel. The machine is equipped with a KOIKE Katana CNC controller and a 15-inch touchscreen for ease of operation. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE Gammatec 1530 machine we have for sale. Contact us for further details. • Effective cutting area: 3,000 × 1,500 mm • Maximum cutting thickness (steel): 30 mm; production thickness: 25 mm • Plasma cutting current: 35–200 A • Cutting speed: 50–20,000 mm/min; positioning speed: 34,000 mm/min • Drive system: AC servo motors • Guide system: Hardened precision guides with rack & pinion • Cutting torches: 1 • Table height: 900 mm • Cutting table: Integrated fume extraction table • Compressed air: 7 bar, oil- and water-free • Machine control power: 230 V / 50 Hz, 2 kVAPlasma system – Kjellberg Smart Focus 200 • Manufacturer/model: Kjellberg Smart Focus 200 Bodpfx Ano Ahqruedjdi • Cutting current: 35–200 A; duty cycle: 100% • Max piercing capacity (mild steel): 30 mm • Marking current: 12–50 A • Power supply: 400 V / 3-phase / 50 Hz • Max connected load: 51 kVA; required fuse: 100 A (slow-blow) • Dimensions (L×W×H): 1,030 × 680 × 1,450 mm; weight: 388 kg • Gas control: PGV-200 automatic gas console • Cutting torch: PerCut 4000CNC control & torch height control • CNC controller: KOIKE Katana with 15" touchscreen • Operating system: Windows 7 Professional • File formats: DXF, EIA, ESSI • Network: Ethernet • Torch height control: SmartLift ARC120 • Z-axis travel: 120 mm; Z positioning speed: 6,000 mm/min • Collision protection: Magnetic torch holder • Plate detection: Ohmic touch sensing • Plate alignment: Manual Additional equipment • Note: Dust extraction unit is excluded

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Comes with various accessories, including piping and automatic control for self-cleaning. Bdjdpjzn Uk Dsfx Andei The system has 2 suction inlets and one outlet for the filtered air. I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Dimensions: approximately 4 x 2.5 x 3 m.

Year of construction: 2013, condition: used, Working area: 6000x2000mm, max. material thickness: 100mm, max. positioning speed: 35,000mm/min, machine height: approx. 1518mm, operating hours: 24,472h. Equipment: Kjellberg HiFocus 161i plasma power source, axis control: digital, maintenance-free DC servos with IRC, linear guides in X and Y directions, helical gearing on all axes, gantry-type CNC cutting machine, complete guide unit with accessories and cable drag chains, dual-side driven gantry bridge, sharp angles and corners, high contour accuracy, sectional under-table extraction system, gas control: automatic gas console, cutting technology: Contour Cut Speed, measuring system: IRC 2500 (incremental encoder). An on-site inspection is possible. Bedpfxs Ahq Nrs Andjdi

Condition: excellent (used), Year of construction: 2022, operating hours: 2,540 h, machine/vehicle number: A1121D0047, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Touchpoint HMI, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: TruDisk 3001, laser hours: 738 h, laser power: 3,000 W, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 2,500 mm, table width: 1,250 mm, working length: 2,500 mm, working width: 1,250 mm, travel distance X-axis: 2,535 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 108 m/min, feed rate Y-axis: 108 m/min, workpiece weight (max.): 150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer a well-maintained TRUMPF TruMatic 3000 (K09) combined laser and punching machine, manufactured in 2022. Bdsdpfo Af Uvyox Andsi Manufacturer: TRUMPF Model: TruMatic 3000 (K09) Material number: 2448753 Power frequency: 50 Hz Voltage: 400 V Diagram number and version: 93120-5-200_05 Serial number: 407618918 Year of manufacture: 2022 Equipment number: A1121D0047 This is an excellent machine located in a clean production environment. It has only been used to process thin sheet metal under 3mm. It has almost all optional features selected from TRUMPF. It is equipped with SheetMaster and SortMaster. It comes with more than 500 tools, automatic QuickSet, and QuickSharp. It is currently in operation and can be inspected by appointment. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Bdjdpfjzizkyox Andsi Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 830 mm, total length: 3,000 mm, total width: 1,500 mm, overall weight: 1,221 kg, For sale is a Siegmund welding table system, model 22. Length x width = 3000 mm x 1500 mm. The table was purchased new by us in 2021 and has always performed well. Bore size = 22 mm, bore spacing = 100 mm. According to the list, the table includes numerous accessories and can be upgraded with additional purchases for various welding constructions. Bjdpfx Ans Ahhvvodedi

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 43 h, machine/vehicle number: PR4-3000-0719-0385, control type: CNC control, working length: 3,000 mm, working width: 1,500 mm, input voltage: 400 V, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Bjdpfx Aj Ahikqendsdi Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Prices exclude VAT.

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 387818, operating pressure: 4,000 bar, Mechanical part and the pump in working order, electric box partially defective. Buyer is responsible for de-installation and transport. Bjdpfx Ans Ahd Tlsdodi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Welding table with clamping system Manufacturer: Siegmund Large format: 3000 x 1500 mm Bodpfxj Ahm Sqj Andjdi with clamping system and trolley

Condition: used, Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 13501.30 Year of manufacture: 2012 Bedpfx Anoz H I Auedsdi Working area: 3,000 x 13,500 mm 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console 31126ä

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. Bjdpfx Anj Ahm Iijdodi The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: excellent (used), Water-cooled chiller with refrigeration compressor Manufacturer: DALEX, Type: ES 1 Bodpfxe Ahqtro Andodi Cooling capacity: 870 W Includes connecting cable and mains plug.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 28,025 h, machine/vehicle number: A0320A0086, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 6,496 h, laser power: 6,000 W, laser wavelength: 10,600 nm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 15,000 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, TRUMPF TruLaser 7040 CO₂ laser cutting machine, year 2011. Equipped with 2 laser resonators, each with 6,000 W power, and 2 cutting heads. Technical data: Laser power: 2 x 6,000 W 2 CO₂ laser resonators 2 cutting heads Laser operating time: 28,025 h Beam operating time: 6,496 h Power supply: 400 V / 50 Hz Connected load: 130 kVA Machine weight: approx. 15,000 kg Machine No.: A0320A0086 Bedpj Adzppefx Andjdi The machine can be inspected while powered on in Poland. Additional information and photos are available upon request. Price: EUR 39,000 net, EXW Poland. Loading and transport to be agreed separately.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Bdedpfx Aex H Ny Tendsi

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: P2060, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: RAYCUS, laser source model: fiberlaser, laser power: 3,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, workpiece weight (max.): 27 kg, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, type of cooling: water, overall weight: 12,000 kg, total length: 12,000 mm, total width: 5,000 mm, total height: 5,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Fiber laser tube cutting machine Golden Laser P2060A-3D 3000 W for sale. The machine is in daily production use, fully functional, and can be inspected while powered on. Main configuration: Laser source: Raycus 3,000 W fiber laser Cutting head: 3D 5-axis bevel cutting head with auto focus CNC control and software: PA (Germany) Nesting software: Lantek (Spain) Servo motors: Yaskawa (Japan) Reducers: APEX (Taiwan); gears and rack: alpha (Germany) Linear guides: HIWIN (Taiwan) Proportional valve: SMC (Japan) Main electrical parts: Schneider (France) Chiller: Tongfei Automatic bundle loader (load size 800 x 800 x 6,000 mm) Automatic unloading / collecting device (max. collecting length 3,000 mm) Pneumatic double chucks with auto-centering Floating support system and floating rear material support Weld seam recognition camera (round and rectangular tubes) Automatic lubrication Dust extraction unit / air dust dryer 5.5 kW Technical data: Tube diameter range: 20–200 mm Max. tube length: 6,000 mm Tube types: round, square, rectangular, oval, obround, H, angle, I and irregular profiles Max. tube weight: 37 kg/m Remnant length: 50–80 mm (Ø < 100 mm), 180–200 mm (Ø ≥ 100 mm) X/Y positioning speed: 95 m/min Bedpfx Anj Afwzwodsdi X/Y acceleration: 1.5 G Chuck rotation speed: 160 rpm Positioning accuracy: ±0.03 mm Axis travel: X 7,180 mm / Y 250 mm / Z 125 mm Axis motor power: X 3 kW, Y 2 kW, Z 2 kW Machine power: 30 kW, 380 V AC, 50/60 Hz Machine weight: approx. 12 t Footprint: approx. 12 x 5.5 m Year of manufacture: 2022 Location: Slovenia Inspection and test cutting possible by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, laser type: fiber laser, laser source manufacturer: RAYCUS, laser power: 12,000 W, sheet thickness (max.): 40 mm, input voltage: 380 V, type of cooling: air, total length: 6,000 mm, total width: 2,500 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, PENTA Laser BOLT V6025 – 12 kW Fiber Laser Cutting Machine Fully functional PENTA Laser BOLT V6025 industrial fiber laser cutting machine, equipped with a powerful 12 kW laser source. Featuring a large 6000 × 2500 mm working area, this machine is designed for high-performance, precision cutting of metal sheets and plates. It offers cutting capacity of up to 40 mm, depending on material type and cutting conditions. Ideal for industrial metal fabrication, steel construction, heavy manufacturing and sheet metal processing. Main Specifications: Bodpfs Ahgd Hex Andjdi Brand: PENTA Laser Model: BOLT V6025 Laser Power: 12 kW Working Area: 6000 × 2500 mm Maximum Cutting Thickness: Up to 40 mm Condition: Fully functional Application: Industrial metal sheet and plate cutting The machine is available for inspection and testing by interested buyers. Please contact us for further technical details, additional photos, videos and pricing information.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, We offer for sale the following used welding fume extraction system from our stock, as described below. It is a compact cartridge filter extraction system from CORAL S.p.A. (Italy), type IperJet DF9, with automatic compressed air cleaning and an integrated high-performance fan. The system was supplied and installed in 2014 by Hinrichsen & Schäfer Reinlufttechnik, 53577 Neustadt/Wied, and was used for the extraction of fumes from two manual welding workstations. Net new price: €18,746. The system is being sold due to the closure of the department and comes from ongoing operations. The system is in working order. Bedoz Dg S Nepfx Andedi The system can be inspected by appointment. Dismantling, loading, and removal will be carried out by arrangement (sale “as is”). Information provided without warranty.

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) We can assist with loading! 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller Bdjdpfx Asztu Aqsndji - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport within Europe. - Video of the machine in operation available upon request; on-site testing is welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of use). Availability: Immediately available. We offer a top-class CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). Perfect technical and visual condition, immediately ready for operation. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key technical data: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table Included software: - CNC control - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced features & equipment: - Soft Sense (IHS): Accurate piercing and cutting height - DTHC: Dynamic voltage correction during cutting - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE loading: Professional loading included in the price! - Transport support: We help organize transport in Europe. - A video of the machine in operation is available upon request, on-site testing possible.

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total width: 3,500 mm, total length: 8,000 mm, overall weight: 5,000 kg, input current: 16 A, FOR SALE: WellCut LC3500 CNC Oxy-Fuel Cutting Machine For sale: a Finnish-built WellCut LC3500 gantry oxy-fuel cutting machine, with a 3.5 m rail gauge and a 3,000 mm single-torch cutting width. Heavy-duty LC frame, designed for thick plate and multi-torch oxy-fuel applications. Burny CNC control with four independently switchable torch stations. Extendable, precision-machined rack-and-rail track. Manufactured by Airwell Oy, Sastamala, Finland, ensuring local availability of parts and service expertise. See the machine in operation before purchase; inspections are welcome. MACHINE OVERVIEW The WellCut LC is the heavy-duty model in Airwell’s WellCut series. It features a taller frame than the FL model, which keeps the gantry and electronics further away from the cutting heat. The LC can accommodate several oxy-fuel torch carriages simultaneously, enabling the cutting of multiple identical parts from thick steel plate in a single pass. This makes it suitable for steel service centers, fabrication shops, and heavy-plate manufacturers. The "3500" designation refers to the 3.5 m rail gauge. TECHNICAL SPECIFICATIONS Manufacturer: Airwell Oy, Finland Model: WellCut LC3500 Year of manufacture: [to be confirmed] Cutting process: Oxy-fuel (flame cutting) Rail gauge: 3,500 mm Cutting width, one torch: 3,000 mm Overall machine width: 3,900 mm Machine height: 1,800–2,100 mm Bdjdo Af Nndopfx Andoi Gantry body length: 1,280 mm Rail length / cutting length: [to be confirmed] m Torch stations: 2 (independently switchable) CNC control: Burny Drives: Omron AC servo motors, Alpha gearboxes Drive rail: Precision-machined rail with rack, mounted on a base beam Cutting table / extraction: CONTROL SYSTEM AND DRIVES The machine is operated by a Burny NC control system from Lincoln Electric, an industry-standard controller for oxy-fuel shape cutting. Panel controls for Go To, Reverse, Go, and Stop, plus a jog pad for manual positioning. Per-station Auto / Manual / Off switching for torches 1-2. Electric gas control from the panel, with manual adjustment as a backup. Panel functions for ignition, preheat, pierce time, and speed. Omron AC servo motors and Alpha precision gearboxes drive the gantry along a precision-machined rack. This ensures accurate and repeatable motion along the entire rail length. FEATURES AND EQUIPMENT Four torch stations for multi-torch oxy-fuel production. Tall LC frame for cutting hot, heavy plates. Precision-machined rack-and-rail drive track, extendable if longer plates are required. Protective covers over the rail and cable chain. Energy chain for hoses and cables along the rail. Torch height control, collision protection.

Condition: used, Year of construction: 2018, Bolt welding power source Manufacturer: Soyer Type: BMH 22i (inverter power source) Year of manufacture: 2018 Maximum welding current: 2,000 A Welding sequence: Ø6/30, Ø22/3 bolts/min. Open-circuit voltage: 75 V Protection class/cooling type: IP 21 / F Connection: 3-phase 400 V / 63 A, 50/60 Hz Electrical continuous current: 2 A / phase Electrical continuous power: 1,400 VA Electrical peak current: 180 A / phase Bedpe Ahhf Usfx Andedi Included: Welding gun Ground cable 21126ä

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Bdsdpfjz Sqpiex Andoi Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2022, functionality: fully functional, track width: 2,600 mm, total length: 6,000 mm, table length: 4,000 mm, sheet thickness (max.): 150 mm, Equipment: documentation/manual, Zinser flame cutting machine from 2022, in very good condition. Sold without fume extraction system/table. Plasma cutting unit may be sold at an additional cost, but is not currently included in the sale. The machine is still in production and can be tested at any time; availability by arrangement. Bdsdpfxo Ahdrks Andji Equipment can be provided for dismantling and loading; price is ex works.