Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Cedpex H Ny Tefx Alfehd

Condition: good (used), Year of construction: 2012, machine/vehicle number: 222262, Offer 26269 Chsdpfx Als Ah Eqzefod Technical specifications: - Welding current: max. 400 A, 52% duty cycle - Welding current: max. 290 A, 100% duty cycle - Adjustable welding current - in 2 coarse steps and 10 fine steps from 30 A to 400 A - Digital voltage and amperage display - 4-roller wire feed, continuously adjustable - Control unit M 101 for: - Two-stroke/four-stroke regulation - Interval welding - Spot welding - Continuously adjustable creep speed and wire burn-back time - Hose pack approx. 4 m - Ground cable - Pressure reducer - Connection: 400 V - Space requirement: approx. W 650 x H 1100 x D 1100 mm - Weight: approx. 180 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 499.007-061, Offer 26344 Technical data: Csdpfx As Ah Rgtslfjhd - Maximum external dimensions of element: 2730 x 1635 mm - Minimum external dimensions of element: 630 x 445 mm - Precise element dimension adjustment via hand crank - Digital dimension display - Clamping devices - Motorized rotating device - Electrical foot switch for right/left rotation - Power supply: 400 V - Length: approx. 2850 mm - Width: approx. 1900 mm - Table height: approx. 1020 mm - Weight: approx. 1000 kg - Various clamps and clamping elements

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,500 mm, overall weight: 1,000 kg, table length: 3,000 mm, workpiece weight (max.): 4,000 kg, borehole diameter: 28 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Table plate thickness: 15 mm Workpiece weight: max. 4,000 kg Bore diameter: 28 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 1,000 mm Empty weight: 1,000 kg Number of transport packages: 1 Included accessories: 4× 3D angle brackets, 300 mm (2× left, 2× right) 6× flat stops, 150 mm 6× flat stops, 225 mm 1× protractor 2× V-blocks 1× eccentric stop Cjdpfe Af Hdnsx Alfehd 1× flat angle bracket 12× clamping screws 12× quick clamps

Condition: used, Year of construction: 2023, TEKA welding fume extraction system Model VACCUBE 30 used Year of manufacture: 2023 Power: 3.0 kW Cedj Ah Drvjpfx Alfjhd Current consumption: 7.2 A Connection voltage: 400 V / 50 Hz Max. capacity: 320 m³/h Max. pressure: 27000 PA Filter area: 8.16 m² PTFE Sound level: 68 d(B)A Weight: 125 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Welding table with clamping system Chodpfxo Ahm Sqe Alfed Manufacturer: Siegmund Large format: 3000 x 1500 mm with clamping system and trolley

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Chsdpfx Alo Ahm Iiofsd Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Comes with various accessories, including piping and automatic control for self-cleaning. The system has 2 suction inlets and one outlet for the filtered air. Chjdpfx Ajzn Uk Dslfod I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Dimensions: approximately 4 x 2.5 x 3 m.

Condition: used, Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, sheet thickness (max.): 38 mm, sheet thickness steel (max.): 38 mm, sheet thickness aluminum (max.): 25 mm, table length: 3,000 mm, working width: 1,500 mm, table width: 1,500 mm, working length: 3,000 mm, controller manufacturer: Hypertherm, controller model: EDGE Pro, control type: CNC control, sheet thickness stainless steel (max.): 25 mm, Equipment: cooling unit, documentation/manual, We offer this used Ermaksan ER 4000 Plasma Cutting Machine, year of construction 2014. Codjz Sqpispfx Alfehd Hypertherm HyPerformance® HPR260XD plasma source and Hypertherm EDGE® Pro CNC control. The table size is 3000x1500mm, and it uses TurboNest® CAD/CAM software. It can cut black steel up to 38mm, stainless steel, and aluminum up to 25mm. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Chjdez N Am Uspfx Alfod Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, total width: 3,500 mm, total length: 8,000 mm, overall weight: 5,000 kg, input current: 16 A, FOR SALE: WellCut LC3500 CNC Oxy-Fuel Cutting Machine For sale: a Finnish-built WellCut LC3500 gantry oxy-fuel cutting machine, with a 3.5 m rail gauge and a 3,000 mm single-torch cutting width. Heavy-duty LC frame, designed for thick plate and multi-torch oxy-fuel applications. Burny CNC control with four independently switchable torch stations. Extendable, precision-machined rack-and-rail track. Manufactured by Airwell Oy, Sastamala, Finland, ensuring local availability of parts and service expertise. See the machine in operation before purchase; inspections are welcome. MACHINE OVERVIEW Cedpo Af Nndofx Alfehd The WellCut LC is the heavy-duty model in Airwell’s WellCut series. It features a taller frame than the FL model, which keeps the gantry and electronics further away from the cutting heat. The LC can accommodate several oxy-fuel torch carriages simultaneously, enabling the cutting of multiple identical parts from thick steel plate in a single pass. This makes it suitable for steel service centers, fabrication shops, and heavy-plate manufacturers. The "3500" designation refers to the 3.5 m rail gauge. TECHNICAL SPECIFICATIONS Manufacturer: Airwell Oy, Finland Model: WellCut LC3500 Year of manufacture: [to be confirmed] Cutting process: Oxy-fuel (flame cutting) Rail gauge: 3,500 mm Cutting width, one torch: 3,000 mm Overall machine width: 3,900 mm Machine height: 1,800–2,100 mm Gantry body length: 1,280 mm Rail length / cutting length: [to be confirmed] m Torch stations: 2 (independently switchable) CNC control: Burny Drives: Omron AC servo motors, Alpha gearboxes Drive rail: Precision-machined rail with rack, mounted on a base beam Cutting table / extraction: CONTROL SYSTEM AND DRIVES The machine is operated by a Burny NC control system from Lincoln Electric, an industry-standard controller for oxy-fuel shape cutting. Panel controls for Go To, Reverse, Go, and Stop, plus a jog pad for manual positioning. Per-station Auto / Manual / Off switching for torches 1-2. Electric gas control from the panel, with manual adjustment as a backup. Panel functions for ignition, preheat, pierce time, and speed. Omron AC servo motors and Alpha precision gearboxes drive the gantry along a precision-machined rack. This ensures accurate and repeatable motion along the entire rail length. FEATURES AND EQUIPMENT Four torch stations for multi-torch oxy-fuel production. Tall LC frame for cutting hot, heavy plates. Precision-machined rack-and-rail drive track, extendable if longer plates are required. Protective covers over the rail and cable chain. Energy chain for hoses and cables along the rail. Torch height control, collision protection.

Condition: like new (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Sideros Syncrolift column lift swivel device, 4000 kg load capacity, in new condition, mobile with numerous accessories Minimum height: 350 mm Chodpe Ahdrnofx Alfjd Maximum height: 1800 mm Vertical travel: 1450 mm Diameter of clamping plate: 600 mm, additional hole plate mounts, plasma nitrided Overall height: 2505 mm Total weight: 1300 kg Torque: 3500 N/m Speed: 0.75 rpm Complete with CE marking and documentation, as well as a declaration of conformity.

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) Chedpfsycvq Aox Alfsd • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Rated power at 50% duty cycle: 25 kVA Max. welding power: 107 kVA Adjustable reach: 140–500 mm Welding specifications – Steel: 6 + 6 mm Brass: 3 + 3 mm Aluminium: 1.2 + 1.2 mm Adjustable electrode force: 17–278 daN Cooling water flow rate: 4 l/min Weight: 240 kg Welding control unit: DALEX MPS 1036 Chjdj Ahw Upspfx Alfed Operating instructions and electrical diagrams are available Working stroke triggered by pneumatic foot pedal Well-maintained condition

Condition: used, Laser cutting system with Rofin Sinar laser source – extensive processing capabilities For sale: a powerful laser cutting system, including a cooling unit and a coolant condenser. The system features a generous processing area and enables the machining of round, angle, and rectangular profiles, as well as sheet metal. With a maximum bar length of 12,000 mm and a maximum finished part length of 6,000 mm, the machine offers versatile applications in industrial metalworking. Technical data Hydraulic system Tank capacity: 50 liters Pump flow rate: 25 l/min Operating pressure: 70 bar Processing data Maximum bar length: 12,000 mm Maximum finished part length: 6,000 mm Max. cut for round profile: Ø 225 mm Max. cut for angle profile: 160 × 160 mm Max. cut for rectangular profile: 200 × 100 mm Minimum cross-section for round profile: Ø 16 mm Minimum cross-section for angle profile: 16 × 16 mm Minimum cross-section for rectangular profile: 16 × 16 mm Max. bar weight: 200 kg Max. weight per meter: 35 kg/m Max. finished part weight: 100 kg Sheet metal format: 3,000 × 1,500 mm Maximum sheet metal thickness according to data sheet: 20 mm Electrical equipment Codpo Ah Tbdofx Alfshd Installed power: 21 kVA Rated current: 30 A Cable cross-section: 16 mm² Connection socket: 63 A Switch: 50 A Enclosure protection rating: IP54 Internal enclosure protection rating: IP20 Laser source – Rofin Sinar DC 025 Supply type: Three-phase, without neutral conductor Supply voltage: 400 V ± 10 % Frequency: 50–60 Hz Installed power: 40 kVA Rated current: 60 A Fuse: 80 NH Cable cross-section: 25 mm² Connection socket: 125 A Cooling unit – Hyfra Pedia SVK 320 Supply type: Three-phase, without neutral conductor Supply voltage: 400 V ± 5–10 % Frequency: 50 Hz Installed power: 22.7 kVA Rated current: 32.8 A Cable cross-section: 10 mm² Connection socket: 63 A Switch: 35 A Tank capacity: 330 liters Coolant condenser Supply type: Three-phase, without neutral conductor Supply voltage: 400 V ± 10 % Frequency: 50 Hz Installed power: 11 kVA Interrupting capacity: 50 kA Rated current: 16 A Cable cross-section: 4 mm² Connection socket: 32 A Additional information The technical specifications have been compiled according to the available machine data. The laser source requires a supply voltage with a maximum voltage drop of ±5%. If deviations occur, a suitable voltage stabilizer may be required. Inspection possible by arrangement. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis KOIKE Gammatec 1530 plasma cutting machine was manufactured in 2018. It features an effective cutting area of 3,000 × 1,500 mm and a maximum cutting thickness of 30 mm for steel. The machine is equipped with a KOIKE Katana CNC controller and a 15-inch touchscreen for ease of operation. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE Gammatec 1530 machine we have for sale. Contact us for further details. • Effective cutting area: 3,000 × 1,500 mm • Maximum cutting thickness (steel): 30 mm; production thickness: 25 mm • Plasma cutting current: 35–200 A • Cutting speed: 50–20,000 mm/min; positioning speed: 34,000 mm/min • Drive system: AC servo motors • Guide system: Hardened precision guides with rack & pinion • Cutting torches: 1 • Table height: 900 mm • Cutting table: Integrated fume extraction table • Compressed air: 7 bar, oil- and water-free • Machine control power: 230 V / 50 Hz, 2 kVAPlasma system – Kjellberg Smart Focus 200 • Manufacturer/model: Kjellberg Smart Focus 200 • Cutting current: 35–200 A; duty cycle: 100% • Max piercing capacity (mild steel): 30 mm • Marking current: 12–50 A • Power supply: 400 V / 3-phase / 50 Hz • Max connected load: 51 kVA; required fuse: 100 A (slow-blow) • Dimensions (L×W×H): 1,030 × 680 × 1,450 mm; weight: 388 kg • Gas control: PGV-200 automatic gas console • Cutting torch: PerCut 4000CNC control & torch height control • CNC controller: KOIKE Katana with 15" touchscreen • Operating system: Windows 7 Professional • File formats: DXF, EIA, ESSI • Network: Ethernet • Torch height control: SmartLift ARC120 • Z-axis travel: 120 mm; Z positioning speed: 6,000 mm/min • Collision protection: Magnetic torch holder Csdj Ahqruepfx Alfshd • Plate detection: Ohmic touch sensing • Plate alignment: Manual Additional equipment • Note: Dust extraction unit is excluded

Condition: good (used), Year of construction: 2020, functionality: fully functional, Equipment: type plate available, We are offering this excellent TEKA Caremaster welding fume extraction system for sale. Manufacturer: TEKA Model: Caremaster Machine type: Welding fume extraction system Chjdpfx Als Agcwwofed Without filters!!! Two units available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Codpfx Alj Aazd Eofshd Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: like new (used), functionality: fully functional, Laser power ≤ 6000 W Wavelength 1064 nm Laser class 1 Supply voltage 400 V, three-phase Rated current 16 A Frequency 50 Hz Fuse 16 A, slow-blow Duty cycle 100% ED (continuous operation) Protection class IP40 Cooling: Internal air circulation Compressed air: 8 bar, less than 100 liters/min The RayCutter systems were specifically developed for the following materials: Codpfxj Ahzpco Alfohd PKD: Polycrystalline diamond, for example for cutting blades. CBN/PCBN: Cubic boron nitride for extremely hard cutting tools. CVD diamond: Synthetically produced diamond. MKD: Monocrystalline diamond. Hard metal and diamond-coated tools: depending on machine configuration and machining process. Typical applications include cutting tool contours, producing precise cutting edges, relief angles, bevels, and complex tool geometries.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz Chjdoyxvwispfx Alfod _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 1,500 kg, Equipment: documentation/manual, Used rotating device in very good condition. - Year of manufacture 2016, mobile, rotatable 360° for assembly, welding, etc. - One unit driven, the other unit rotates passively. Chodpjz S U Rdefx Alfod - CE certified, with documentation. - Adjustable axle distance. - Max. component weight 1500 kg. - Max. diameter 1600 mm. - Max. component torque 2080 Nm. - 2-hand operation. - Optional foot control. - Protection 16 A. - Own weight 670 kg. Like new. 2 units available for sale.

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) We can assist with loading! 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE Loading: Professional and safe loading included! Codoztu Aqjpfx Alfjhd - Transport Assistance: We assist in organizing fast and cost-effective transport within Europe. - Video of the machine in operation available upon request; on-site testing is welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of use). Availability: Immediately available. We offer a top-class CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). Perfect technical and visual condition, immediately ready for operation. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key technical data: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table Included software: - CNC control - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced features & equipment: - Soft Sense (IHS): Accurate piercing and cutting height - DTHC: Dynamic voltage correction during cutting - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE loading: Professional loading included in the price! - Transport support: We help organize transport in Europe. - A video of the machine in operation is available upon request, on-site testing possible.

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Cedex Ap A Rjpfx Alfjhd Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: used, Year of construction: 2002, Technical details: table load: 2 t Chodo Ahwr Eepfx Alfjd table diameter: 1500 mm Total power requirement: 12 kW table rotating: 360 continouss Grad table - inclinable: -30 - 100 Grad swival range +/-: 130 Grad height of the swivelling axis: 1005 mm machine weight approx.: 3,7 kg rotary table revolutions per minute : Infinitely variable, hydraulically controlled drive Torque: 15.000 Nm dimensions LxWxH: 2,8 x 1,6 x 1,2 m

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. Cjdpfoz Ng Nyex Alfshd 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.