Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Gedpetq Ufvofx Ad Ujtw Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. Gtodpjym Unzsfx Ad Uow This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F17/5BTZA1/A/01, arm reach: 800 mm, load capacity: 2 kg, empty load weight: 100 kg, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Reach: 800 mm Payload: 2 kg MACHINE DETAILS Control: Teach-in Gsdpfjyuaylox Ad Ujtw Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,300 mm Unladen weight: 100 kg Transport packages: 1 EQUIPMENT CE marking

Condition: new, Year of construction: 2025, Protec welding rotary table 5000 Kg load capacity Gtedpfxeid Szce Ad Usw speed infinitely variable 0,05 - 0,5 rpm manual remote control height 600mm diameter 1500mm Foot remote control extra charge

Condition: like new (used), functionality: fully functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Weight 4700 kg Gtedjwd Twqjpfx Ad Usw with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: good (used), load capacity: 2,000 kg, 3-axis welding positioner, 2-ton load capacity, in good condition Gtedpfx Aexxvabjd Uew Incl. hand remote control (foot control available on request) Inclination and rotation speed continuously adjustable 0.05 - 1.0 rpm Clamping plate diameter: 1.0 meter Height tilted to center min. approx. 0.7 m, horizontal 0.9 m Height tilted to center max. 1.6 m, horizontal 1.8 m Length 2.2 m, width 1.35 m

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Column Lifting Rotating Device with 2-Ton Capacity Gsdpfxjwihxao Ad Ustw Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Movements Load Capacity 2000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Drive Motor Torque 3100 N-m Clamping Plate Diameter 500 mm Rotating Motion 0.55 kW 2 to 10-Ton Capacity Available Upon Request

Condition: excellent (used), SEVERT Double-Column Rotary Positioner S 40.1-1HH Can also be used as a single-column elevating rotary device (Mono) Total load capacity: 2,000 daN Load capacity per column: 1,000 daN Clamping plate 1 torque: 1,400 Nm Gtedpfx Aoxxx Nrsd Uew Clamping plate 2 free-rotating, without drive Clamping plate rotation speed: 2.0 min⁻¹ Clamping plate 1: W1070 x H720 x D30 mm, Part no. 20452-001 Clamping plate 2: W1070 x H720 x D30 mm, Part no. 20453-001 Vertical travel: 680 mm Lifting speed: 2,200 mm/min Welding current return: 400 A B2 Dimensions: Column 1 with base: Length: 970 mm Width: 885 mm Height: 2,350 mm Net weight: 1,200 kg Column 2 with chassis: Length: 970 mm Width: 1,030 mm Height: 2,350 mm Net weight: 1,600 kg Excellent condition, complete documentation available We have several column elevating rotary devices in stock with capacities from 1 tonne up to 15 tonnes.

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotary table Complete set incl. double foot remote control and hand remote control with digital display 5000 Kg load capacity Diameter clamping disc 1500mm Height horizontal 1500mm Height tilted to middle 1500mm Speed infinitely variable from 0.01 to approx. 0.7 rpm Inclination up to 120 length 2100mm Godpfofkt Ebjx Ad Ustw width 1500mm

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Gjdpfowz Rfysx Ad Ujtw Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m New electrics With hand and foot remote control

Condition: good (used), functionality: fully functional, load capacity: 1,500 kg, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes handheld remote control - maximum load 15,000 N - 1,500 kg - rotation speed 0.07 - 1.3 rpm - rotation torque 1,000 Nm Gtsdpfxsxxv Rte Ad Usw - hydraulic tilting up to 135° - tilting moment 3,000 N - max welding current 700 A - table diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - connection 3 x 400 V / CEE 16A - weight 730 kg We have several of these tables available

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 2,000 kg, Sideros turning device, column lifting and rotating unit, mobile on one side with positioning table. 2-ton load capacity. New, year of manufacture 2020, unused, with remote control. Minimum working height 350 mm. Maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical adjustment 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotational drive 0.75 kW. Lifting motor 1.85 kW. Machine height 2505 mm. Weight approx. 1050 kg. Condition: as new, unused. Shipping possible. Includes documentation, drawings, etc. Gjdpfx Adoyr Affj Ustw

Condition: used, functionality: unexamined, machine/vehicle number: 09070413, For sale: Sigma 400 welding machine. The welder was used in our facility but has been disconnected for a year. Gedpfxeyt Id Ae Ad Ustw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 6,000 kg, Equipment: documentation/manual, Sideros Syncrolift column lifting and rotating device, 6000 kg load capacity, as new condition Min. height: 450 mm Gsdpfx Aeyrz Hnod Ujtw Max. height: 1950 mm Travel: 1500 mm Clamping plate diameter: 800 mm Total height: 2505 mm Total weight: 1300 kg Torque: 5500 N/m Speed: 0.75 rpm.

Condition: excellent (used), functionality: fully functional, Equipment: type plate available, For sale: Cebora Plasma Prof 254 HQC industrial plasma cutter, complete with PGC-3 gas console. This Italian-made machine is designed for industrial applications and can be integrated with CNC systems. Technical data: • Model: Plasma Prof 254 • Manufacturer: Cebora (Italy) • Cutting current: 15–250 A • Duty cycle: 100% at 250 A • Operating voltage: 160 V • Open circuit voltage: 315 V • Power supply: 3-phase 380–400 V • Frequency: 50/60 Hz • Maximum power consumption: approx. 74 A • Protection class: IP21 • Cooling: forced air Equipment: • Plasma source: Plasma Prof 254 • Gas console: PGC-3 • Cables • Plasma gas control Gtsdpsyt E Thsfx Ad Uew • Manual or CNC table operation possible Additional information: • HQC – High Quality Cut system • Torch type: Cebora CP251G • Maximum gas pressure: 0.45 MPa • Air flow: approx. 1.7 kW Applications: • Structural steel • Stainless steel • Aluminium • Capable of cutting thick industrial materials Condition: Complete machine as shown in the photos.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,350 h, functionality: fully functional, repeat accuracy: 0.076 mm, travel distance X-axis: 3,848 mm, travel distance Y-axis: 1,574 mm, travel distance Z-axis: 160 mm, positioning accuracy: 0.076 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 150 mm, table length: 4,216 mm, table width: 2,019 mm, pressure: 3,450 bar, operating pressure: 3,450 bar, warranty duration: 6 months, total height: 2,692 mm, total length: 5,486 mm, total width: 3,696 mm, water pressure: 3 bar, compressed air connection: 5 bar, overall weight: 11,975 kg, MAXIEM 2040 – 40HP Waterjet | 5-Axis A-Jet 2017 | Only 2,250 Hours | Ready to Work For sale: MAXIEM 2040 – 40HP CNC Waterjet System in very good condition, fully operational and ready for immediate production. ✔ Year: 2017 ✔ Operating Hours: 2,250 h Godpsypb Dhofx Ad Uotw ✔ 40 HP Pump ✔ Large 2040 cutting platform Equipped with: A-Jet 5-Axis cutting head (taper compensation & bevel cutting) VS-SRS automatic tank cleaning system Terrain Follower (TF) for precise height control Abrasive Hopper for continuous abrasive feeding Ideal for cutting steel, stainless steel, aluminum, stone, glass, composites, plastics and more. Premium configuration at a fraction of the cost of a new system. Optional (extra cost): Dismantling, transport, installation, and operator training (English) available. Machine type: Waterjet cutting machine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,270 h, travel distance X-axis: 1,505 mm, travel distance Y-axis: 3,005 mm, travel distance Z-axis: 210 mm, number of axes: 5, This 3-axis PHENIX MD JET 1530 was manufactured in 2021. It features a spacious 1500 x 3000 mm table and a powerful 30HP hyperthermal pump capable of 4100 bar pressure. The machine has 1290 hours of operation and includes essential components such as a pump, tank, filter drain, and a salt softener. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX MD JET 1530 machine we have for sale. Contact us for further details. • 1500x3000 Table Gtedpfxoytf T Ij Ad Uew • 30HP Hyperthermal Pump • 4100 Bar Pressure • 1290 Hours • Joystick (Faulty, needs repair or removal, but functions without the option) Additional equipment • Cooling Radiator with Barrier and Hardware • Salt Softener Included • Consumables Included • Pump/Tank/Filter Drain for Sale

Condition: ready for operation (used), Year of construction: 2021, This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information. Gtodpfx Ajx D D N Ued Usw Application Types Cutting

Condition: ready for operation (used), Year of construction: 2013, This CLOOS QRH 390 was manufactured in 2013. It features a QRH 390 with a QIROX Controller V6 and a C-stand MH=24330. Equipped with advanced welding technology and an extraction system, this welding robot is ideal for enhancing your production capabilities. Contact us for more information about this machine. Application Types Welding Gtedpsx S Siujfx Ad Uew

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, arm reach: 3,000 mm, Mobile welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type KEMPER. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Model: Filter-master XL Gtsdpfx Aeymkq Sjd Uew Fan power: 1.5 kW Airflow: 1000 m3/h Vacuum: 3000 Pa Cartridge filter element. Stock no.: 1110

Condition: ready for operation (used), Type: DS 6001.20P De conventionele plaatbewerkingslijn DS is ontworpen voor zeer efficiënte boren en plasmasnijden, met de mogelijkheid tot automatische plaatinvoer en automatische sortering van onderdelen bij de uitvoer. De machine is speciaal ontworpen voor zware toepassingen in constructiestaal, zoals de productie van zeer nauwkeurige fittingen, hoekplaten en eindplaten. Plasma: - 3D plasma-afschuurkop voor recht snijdend en schuin snijden tot +-50° - Hypertherm XPR 300 (doorboring 45 mm) - Maximale plaatgrootte: 6000 x 2000 mm - materiaaldikte: 3 30 mm - laserlicht Plasmamarkering Boren: - MG-40 P26 boorapparaat ISO 40 - boorbereik: diameter 4 40 mm - draad: M4 M33 - maximale dikte: 100 mm - slak: 400 mm - 26 kW op spindel ISO 40 - max. 1829 tpm - automatische gereedschapswisselaar; 8 gereedschapsposities ISO 40 - externe en interne gereedschapskoeling CNC-besturing: iMSNC-systeem voor Windows® 10TM' 64-bit PRO met geïntegreerde netwerkkaart en USB-poort Gsdjyuk Sxspfx Ad Uetw Met een vacuümzuigsysteem kunnen platen op de snijtafel worden geladen Totaalgewicht: 30 ton Benodigde ruimte: 16 500 x 7100 mm

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 897, total height: 700 mm, total width: 400 mm, total length: 900 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Gtsdpfx Aoyr H H Ted Uow Placing a bid obligates the buyer to collect the item on time between 04.05.26 and 07.05.26. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 400 x 700 mm Weight: 150 kg Note: The gas cylinder shown in the photos is not included in the scope of delivery. For welding technical data, see the nameplate photo. External reference: 39

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Gedpfx Adev Ipcfs Ustw Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Gsdpfx Adst Awm Ds Uotw Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: ready for operation (used), for manufacturing composite beams, (trailer)chassis, overhead travelling cranes, metal constructions... 2 welding heads each equipped with an Esab LCA 800 amp source: - max distance between movable heads: 3000 mm - heads can be controlled independantly Gedpfxsytyrfe Ad Ustw - application is arc welding - 2 feed units Esab A6, currently equipped with 4 mm welding wire - single weld through piece is possible welding length is unlimited, crane is currently equipped with 45meter cable crane can be turned manually by 180° (= can weld on two sides) FR: soudage de poutres reconstituées