Condition: ready for operation (used), Year of construction: 2023, This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Additional equipment • Laser with 8kw and chiller • Open Cabin with right and left side accessible doors • Safety glasses on the doors • NIGHT Cut for safer cutting and piercing process • SMART Cut for faster processing of thin material • MAX Cut for piercing process time reduction for thick material • Gas Mixer Cut • Nozzle check and OPC by camera • Adaptive cut • ATC automatic tip changer with 20 nozzle stations Gtsdpfx Asx D Ebrjd Ujw Machine Benefits Technical Machine Benefits • Dust collector for high production (3200m3/h) with 6 cartridges • Automatic selector for additional cutting gas • Uninterruptible power supply (ups) • Fleet manager remote care via tosibox • Interface to nt or automation connection • Interface for psr 2d Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2020, This GEPELEKTRO Phantom CNC was manufactured in 2020. It features a large working area with table dimensions of 12,000 × 3,000 mm and is equipped with a Lincoln Electric Burny Phantom II controller. It can handle flame cutting up to 300 mm steel and plasma cutting up to 50 mm steel. The machine includes a complete extraction system and Messer OmniWin 2019 software. Contact us for more information about this machine. • Condition: Excellent, low operating hours • Status: Connected to power; testable on-site • Working area: Table 12,000 × 3,000 mm • Control system: Lincoln Electric Burny Phantom II • Plasma source: Kjellberg Finsterwalde HiFocus 161i • Maximum cutting thickness: • Oxy-fuel (steel S235): up to 300 mm • Plasma (steel S235): up to 50 mm • Plasma (stainless WNR 1.4301 / AISI 304 / KO-33): up to 40 mm Additional equipment • Complete extraction system • Messer OmniWin 2019 software with hardware key Gtedpfxox E Edfj Ad Ujw

Condition: ready for operation (used), Year of construction: 2017, This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us. Additional equipment • Energy chain for plasma operation • Environmentally friendly extraction system with sectional distribution • Automatic gas console for monitoring and controlling gas flow and pressure Machine Benefits Technical Machine Benefits • High-quality ac servo motors for movement • Automatic initial height detection via nozzle contact • Optimal cutting quality with customized gas mixture • Excellent extraction quality with designed cross distributors • Plasma and oxyfuel cutting • Total table elements: 4 • Dimensions per table element: 2080 × 2100 × 950 mm Gtjdpfx Adex D R S Ae Uow • Continuous usable work surface: 2000 x 8000 mm (vertical cutting), 1500 x 8000 mm (angled cutting) • Movement feed: 10 to 15000 mm/min rapid traverse: 25000 mm/min • Double-sided, synchronized longitudinal drive via pinion and rack with brushless ac servo motors Extra Information Control Unit CNC path control with Windows 8.1 operating system 17" TFT color monitor - Touch Full HD IPC-based with AMD CPU 4x2.0 GHz SSD 64 GB, 4 GB RAM (upgradeable to 16 GB RAM) Ambient temperature +5°C to +45°C at max. 90% humidity, non-condensing 100-240 V AC input voltage Integrated network card Joystick for manual movement Remote maintenance service Cutting range: 0° to 50° vertical stroke Compressed air requirements: max. 7 bar, cleaning pressure 6-7 bar Sound level during filter cleaning: ≤ 75 dB(A)

Condition: ready for operation (used), Year of construction: 2022, product length (max.): 6,040 mm, number of axes: 3, This 3-axis LVD Phoenix fiber laser cutting machine was manufactured in 2022. It features a cutting length of 6040 mm, width of 2040 mm, and can handle material thickness up to 20 mm. Consider the opportunity to buy this LVD Phoenix fiber laser cutting machine. Contact us for more information about this machine. • Width: 2040 mm Gtodpsycvmkjfx Ad Uew • Thickness: 20 mm

Condition: ready for operation (used), Year of construction: 2014, This SAF PRO ALPHATOME 20 40 plasma cutting machine was manufactured in 2014. It features a robust 4000 x 2000 mm table and includes a NERTAJET HP150 plasma source along with PRONEST HYPETHERM NESTING SOFTWARE. Designed for cutting up to 20 mm steel, it ensures precision with CNC control and linear guides on all axes. Consider the opportunity to buy this SAF PRO ALPHATOME 20 40 plasma cutting machine. Contact us for more information. • Table size: 4000 x 2000 mm • Cutting capacity: up to 20 mm steel • CNC control with mouse • CNC control with included cutting software • Linear guides on all axes for high repeatability • Robust base for increased support and rigidity • Country of manufacture: France Gjdpfjx D D Nhox Ad Uetw • CE compliant Additional equipment • NERTAJET HP150 plasma source • PRONEST Hypertherm nesting software

Condition: ready for operation (used), Year of construction: 2016, total height: 1,155 mm, controller manufacturer: SIEMENS, This SPIRO 6000V4 plasma cutting machine was manufactured in 2016. It features a large work table of 6000 x 1500 mm and can handle materials up to 6 mm thick, including steel and aluminum. Equipped with a SIEMENS controller and HYPERTHERM POWERMAX 1000 plasma source, it supports DXF file import/export. Ideal for medium to large industrial settings. Contact us for more information about this machine. Additional equipment • Plasma Source: HYPERTHERM POWERMAX 1000 Machine Benefits Technical Machine Benefits • Galvanized steel: 6 mm • Black steel: 6 mm • Cutting gas: air (dry and clean) • Cutting gas flow: 170 l/min Gtodpfx Ajx D D I Rsd Uow • Cutting gas pressure: 6 bar • Exhaust system efficiency: 6000 m3/h Extra Information Machine still under power Dimensions Machine Depth 7000 mm

Condition: ready for operation (used), Year of construction: 2021, operating hours: 66,828 h, laser power: 2,500 W, This ADIGE LASERTUBE LT722D was manufactured in 2021. It's designed for laser processing of tubes, handling materials like mild steel and stainless steel. It supports various tube shapes, including round, square, and rectangular, with dimensions up to 140 mm. Features include a PRECITEC AK-HP cutting head, automatic tube bundle loader, and a robust unloading system. Ideal for high-quality laser cutting operations. Contact us for more information about this machine. • Semi-sealed, diffusion-cooled co2 laser source rofin dc 025 compact. Rated power: 2500 w. • Main module of the automatic unloading system with 1-cnc-axis controlled support for the tube to be machined • Program-controlled unloading • Extension module of the automatic unloading system for part lengths up to 4500 mm • Sorting of good parts to front (desk side) and rear (loader side) • Sorting of cut pieces and offcuts into a cassette • Suitable for processing open profiles (flat, l, c, and u-profiles) • Specific mechanical devices and process modifications for open profiles • Suitable for processing tubes made of mild steel or stainless steel • Round tube dimensions: Ø 12–140 mm • Square tube dimensions: 12 x 12 mm to 120 x 120 mm • Rectangular/flat-oval tube dimensions: side 10 mm up to max 140 mm • Maximum side difference for rectangular/flat-oval tubes: 110 mm • Workpiece envelope: inscribed in a Ø 170 mm circle • Maximum tube weight: 15 kg/m; 100 kg total maximum • Equipment and Unloading Device Features • Equipment for a 6.5 m bundle loader for tubes/pipes with sensitive surfaces: Rubber cladding of the chains for material feed. Plastic cladding of the tube/pipe loading and holding parts up to separation. • Main module of the automatic Unloading Device, with: 1-CNC-axis controlled support for the tube/pipe to be processed. Program-controlled unloading. • Extension module of the automatic Unloading Device for partial lengths up to 4,500 mm, with: Sorting of the good parts: To the front (console side), from 250 mm to 4,500 mm. To the rear (loader side) up to 4,000 mm. Sorting of crop ends and remnants in lengths under 250 mm into a e/Pipe Specifications • Round Tubes: Diameter $\text{12 mm}$ up to $\text{140 mm}$. • Square Tubes: $\text{12 x 12 mm}$ up to $\text{120 x 120 mm}$. • Rectangular/Flat Oval Tubes: $\text{10 mm}$ side up to max. $\text{140 mm}$ side. Maximum side difference: $\text{110 mm}$. Must be inscribable in a $\text{170 mm}$ diameter circle. • Maximum Tube/Pipe Weight: $\text{15 kg/m}$ (100 kg maximal total). Additional equipment • PRECITEC AK-HP universal cutting head holder for non-contact distance control • Capacitive distance sensor with reinforced ceramic part • Pressure resistance up to 25 bar Gtsdpfx Adsx D Nnij Ujw • Mixed cooling (water and dry air) for the lens holder/upper lens area • Dry-air cooling of the ceramic part and nozzle • Automatic tube bundle loader for initial lengths between 3200 and 6500 mm • Loading with an overhead crane possible • Special lift loader equipment for square, rectangular, and flat-oval tubes • Tube separation with length measuring station • Equipment for a 6500 mm bundle loader for pipes with sensitive surfaces • Artube nesting software included

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: • Traverse speed: 500 in/min (12,700 mm/min) • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) Gjdpfxeya Ecio Ad Ujtw • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display • No special foundation required • Ergonomic full table access • Made in the USA

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 2,000 mm, travel distance Y-axis: 8,000 mm, This 5-axis AJAN PP 260 A-5T plasma cutting machine was manufactured in 2015. It features a robust AJAN PP260A power source with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area spans 2000 mm by 8000 mm, and it includes an AJANCNC 952 Controller for precise control. Consider the opportunity to buy this AJAN PP 260 A-5T plasma cutting machine. Contact us for more information. Additional equipment • Cutting Gases: O₂, N₂, F5, H35 / Table Ventilation: Mechanical valve with JET filtration system/ Optional Features: Oxy-fuel torch, pipe cutting unit, industrial fume extraction system Machine Benefits Technical Machine Benefits • Cutting capacity: mild steel: up to 65 mm/ stainless steel: up to 50 mm/ aluminum: up to 50 mm • Piercing capacity: mild steel: 40 mm /stainless steel: 25 mm /aluminum: 25 mm • Max. Positioning speed: 15 m/min • Positioning accuracy: ±0. 01 mm • Number of axes: 5 (with bevel cutting capability) • Control system: linux-based / software: ajancad and ajancam v7. 0 Gtodpjyaiyxofx Ad Uow

Condition: ready for operation (used), Year of construction: 2016, This MicroStep Fiber MSF 4001.20L was manufactured in 2016. It features a 4m x 2m cutting table with hydraulic pallet changer, an automatic feeding tube cutting system for tubes up to 200mm diameter and 6m length, and a 4kW IPG YLS laser source. Includes Donaldson extraction and filtration equipment. Consider the opportunity to buy this MicroStep Fiber MSF 4001.20L fiber laser cutting machine. Contact us for more information. Additional equipment • Donaldson extraction and filtration equipment Gtodpfx Adsyaiy Ee Ujw • Automatic layout planning software for flat sheets • Tube cutting layout planning software Machine Benefits Technical Machine Benefits • 4m x 2m cutting table with hydraulic pallet changer • Automatic feeding tube cutting system, up to 200mm diameter and 6m tube length • 4kw ipg yls laser source • Highyag cutting head for perpendicular cutting only Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: BECKHOFF, controller model: n/a, overall weight: 35,900 kg, number of axes: 5, This 5-axis NUKON Fiber Laser Extreme 30250 was manufactured in 2021. It features a 12 kW fiber laser, Beckhoff CNC control system, and a maximum sheet size of 2,500 x 12,000 mm. The machine supports speeds up to 50 m/min and includes a servo drive system. Consider the opportunity to buy this NUKON Fiber Laser Extreme 30250 fiber laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Noise emission: 60 db • Control system: beckhoff cnc • Display: 19" tft standard screen • Control console: all functions can be controlled from the panel Gtodpfxox U Ur Dj Ad Uow • Interface: ethernet • Drive type: servo • Repeatability: ± 0. 35 mm (over 500 mm) • Rotary axis (rotational axis): 160 rpm • Acceleration (x, y, z): 1. 5 g • Positioning accuracy: ± 0. 35 mm (over 500 mm) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2017, This KOIKE PNC 12 Extreme plasma cutting machine was manufactured in 2017. It features a complete plasma cutting system with a water tank and base frame, an oxyfuel torch tested only once, and includes software for nesting and programming. The Hypertherm Powermax 1250 power supply ensures reliable operation. Contact us for more information. • Plasma cutting system: PNC 12 Extreme • Complete with water tank and base frame Additional equipment Gtjdpjx S Skfsfx Ad Ujw • 1x oxyfuel torch (only tested once) • Hypertherm Powermax 1250 plasma power supply • Software for nesting and programming • Consumable parts

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,265 h, laser power: 5,000 W, This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Trulaser 5030 (l56) documentation • Machine software • 1 additional postprocessor • Trutops laser programming course Extra Information General Data Machine: Closed machine frame Torque drive combined with linear direct drive Closed beam guidance via fiber optic cable (LCC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 17* touch color screen Wide longitudinal conveyor belt TruDisk power supply via the machine Work area lighting Positioning Laser Guides: Spray direction PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Coupler cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device TRUMPF Laser: TruDisk 3001 solid-state laser with one LLK output Fiber optic cable according to standard layout Laser cooling unit (water-air) Excitation via Pump diodes Laser power control Subject to international export controls according to EC Dual-Use Regulation 428/2009 (lasers covered by 6A005) Cutting Head: Universal cutting unit with fully adaptive lens system Single-head cutting strategy Protective glass to protect against lens contamination ControlLine: Height control and outer sheet edge trimming Control: SINUMERIK 840D SL control system Simple and advanced workshop programming Fast re-production Integrated technology data Automatic shutdown Programmable cutting gas/pressure selection FastLine, FlyLine, AdjustLine Gsdpfx Ajx D Hg Aed Uetw Data Transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified safety glass, door on the right Electric retractable roof Voltage and Frequency: Voltage: 400 V Frequency: 50 Hz Color: Standard white - blue RAL design 250 20 20 - blue NCS S 0505 RBOB - white Solid-state Laser: TruDisk 5001 with 1 air cooler outlet Additional Features: Nozzle changer BrightLine fiber DeteciLine: Precise sheet position detection Clamping clamps (2 pieces) Integrated camera (Full HD) for process monitoring with monitor interface Individual oil feed into the network ClitMaster Gompact retrofit capability

Condition: ready for operation (used), Year of construction: 2015, This Bystronic Fiber 4020 6KW was manufactured in 2015. It features a tool changer for sheet metal formats up to 2030 mm x 4030 mm and a 6kW fiber laser. The operator terminal is equipped with a touchscreen, USB interface, and runs on Windows XP. With low operating hours, this machine is ideal for precise cutting tasks. Contact us for more information. • Tool changer designed for sheet metal formats 2030 mm x 4030 mm Gtjdpfxoyir Sio Ad Usw • Operator terminal includes: hard drive, USB 2.0 interface, network card, DVD-RW for quick updates, Windows XP operating system, touchscreen functionality, standard PC keyboard (US) • 6 kW fiber laser • Low operating hoursIncluded: • Trumpf brand rust support cleaner • Vacuum sheet metal lifte

Condition: ready for operation (used), Year of construction: 2016, number of axes: 6, This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine. Additional equipment • Premium control panel with wall bracket and cable holder • External gas cleaning device • Adjustable electro-pneumatic valve • Wire feed equipment Machine Benefits Technical Machine Benefits • Built-in welding interface and software • Protective tube for wire transfer • High usability with movable counter-side support • Workstation: 3400 mm • Longitudinal track travel speed: 1. 8 m/sec • Longitudinal track travel length: 7000 mm • Qineo touch sensor: 60 v • Arc sensor for welding path adjustment Extra Information Includes standard height robot stool and computer connector for enhanced usability. Gedpfx Aeyaliijd Ujtw Control Unit Control: V6 Advanced Digital inputs and outputs: 16 USB connectors: 2 Connectivity: Expandable up to 16 axes, CAN-Bus, serial interfaces

Condition: ready for operation (used), Year of construction: 2019, total height: 2,500 mm, overall weight: 2,700 kg, number of axes: 3, This 3-axis STM WS3040 waterjet cutting machine was manufactured in 2019. It features a large effective cutting area of 3000 x 4000 mm, dual Z-axis CNC for enhanced precision, and is equipped with advanced NUM FLEXIUM plus 3D 5-axis control. Additional highlights include LED work area lighting, a high-pressure Servotron pump, and comprehensive safety technology. If you are looking to get high-quality cutting capabilities, consider the STM WS3040 machine we have for sale. Contact us for more information. Additional equipment • Retrofit between 2020-2023 Machine Benefits Technical Machine Benefits • Quick up feature Godpfex D Sktjx Ad Ustw • High-pressure connection between pump and cutting head • Pressure relief valve • Effective cutting area: 3000 x 4000 mm • 2x z-axis cnc 3d with a and b axes • Clearance height: 300 mm with quick up • 2x stm3d cutting heads with cutting angle error compensation, pivotable up to 68° • Max material thickness: 50 mm • Support surface: 3100 x 4100 mm • 2x electric pre-drilling unit for material Extra Information Pressure Bag Filter for Wastewater Treatment Machine-Specific Data Servotron 40.45+ High-pressure Pump: 4.6 liters/min, 45 kW CNC Abrasive Dosing Unit with Intermediate Container 1600 kg Abrasive Storage Container with Mini Hopper Media Oil Filling, AC Oil/Air Heat Exchanger OneClean Hydrofilter including Automatic Water Level Control for Cutting Tank Water Analysis System Control Unit CNC Control: NUM FLEXIUM, 40 m/min Handheld Control Unit Touch Screen Operation Work Area Lighting via LED Strip Dimensions Machine Depth 3900 mm

Condition: ready for operation (used), Year of construction: 2012, total width: 4,650 mm, total height: 1,660 mm, product length (max.): 15,000 mm, table load: 1,000 kg, number of axes: 3, This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details. • Table size: 2,500 x 13,000 mm • Cutting area: 2,700 x 12,950 mm • Table height: 700 mm • Max material thickness: 125 mm Gtsdpfx Adjyrf Szj Ujw • Plasma generator: ESAB Precision Plasma M3 Gen 2, 360 A • Plasma torch: PT 36 • Gas torch: Cool Jet (1 unit) • Control system: CNC Vision 51 • Power supply: Machine 1 x 230 V 50 Hz; Plasma 3 x 400 V 50 Hz • Operating hours: • Plasma torch: 2,795 h • Gas torch: 1,979 h • Gantry and drive: • High-performance cutting gantry • Linear control, AC motor drives, double-sided rack and pinion • Positioning speed max. 24,000 mm/min • Continuous gantry position monitoring • Plasma and gas cutting: • Plasma gases: Technical air, N₂, O₂, H35 • Max piercing: 40 mm (CS/SS/Al) • Cutting speed (CS): 12 mm – 4,200 mm/min; 25 mm – 2,000 mm/min; 38 mm – 1,000 mm/min • Automatic piercing, capacitive height control • HF start system • Cutting quality: ISO 9013 Class 3 • Protection and environment: • Dust protection: IP54 • Relative humidity: 10–85% (no condensation) • Dimensions and installation: • Cutting table: 17-section Additional equipment • Filter unit: ECO 16 CT (extraction/filtration)

Condition: ready for operation (used), Year of construction: 2024, laser power: 6,000 W, This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine. • Capacity: Cuts pipes up to 8.5 m in length and up to 280 mm in diameter Gtsdpfxsybccps Ad Uew

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Godpfxeyaimlo Ad Ujtw Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: FANUC, number of axes: 6, This 6-axis FANUC ARC Mate 100iC welding robot was manufactured in 2011. Ideal for precision welding tasks, it offers robust construction and reliable performance. If you are looking to get high-quality welding capabilities, consider the FANUC ARC Mate 100iC machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Payload: 10 kg Gtsdpfxeyaiyfj Ad Uew • Reach: 1,421 mm • Repeatability: ±0. 08 mm • Robot weight: approx. 130 kg • Mounting: floor / wall / ceiling

Condition: ready for operation (used), Year of construction: 2021, number of axes: 2, Plasma cutting machine manufactured in 2021. This Hypertherm HPR170 machine features a sturdy construction capable of handling up to 100 mm material thickness and high-quality linear guides for precision. With digital, maintenance-free AC servos, it offers impressive speeds of up to 40,000 mm/min. Consider the opportunity to buy this Hypertherm HPR170 plasma cutting machine. Contact us for further details. • Working area: approx. 3,000 x 1,500 mm • Material thickness capacity: up to 100 mm • Construction: sturdy build • Guides/drive: high-quality linear guides; backlash-free drive on both sides • Servo system: digital, maintenance-free AC servos with IRC Gjdpfx Aeylbdysd Ustw • Encoder: IRC 2500 (incremental encoder) • Max speed: up to 40,000 mm/min

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: KUKA, controller model: KRC4, number of axes: 6, These KUKA welding robots are featuring a turn-tilt module with a maximum load capacity of 2600kg and a KUKA KL4000 track. If you are looking to get high-quality welding capabilities, consider this pack of weding robots we have for sale. Contact us for more information about it. Gtsdpsx D Hzmofx Ad Ujw Additional equipment • Component holder (cradle) between the rotary tilting table and the counter bearing. L = 4250mm x 1000mm. 16mm holes as provided. • Connection to the faceplates with standard Bräuer drilling pattern (installation height is still to be adjusted to ensure the largest possible turning radius). • The component holder is designed for quick change. (Brauer Standard) Machine Benefits Technical Machine Benefits • Turn-tilt module (max load 2600 kg) • Mount position (assembly) track: kl4000 • Hofmann blauf. Rotary module with counter bearing • Rotary/tilting module kp2-hv 2600 hw with counter bearing for robot system // rotary-tilting module kp2-hv 2600 hw, freely programmable, maximum load 2,600 kg, maximum torque 3,900 nm, maximum tilting moment 9,250 nm, maximum rotation axis speed 50°/s, maximum tilt axis speed 25°/s • Turning diameter = 1,200 mm • Krc4 standard control cabinet • Design services for fixtures, grippers, positioners, or customized accessories • Closed cable ducts for installation within the system on the floor/base plate or as open cable trays for installation above the protective fence • Cda layout plan Extra Information The machine is completely new and unpacked It was build by the system integrator, but never delivered. Counter bearing for rotary-tilting module KP2 Counter bearing for rotary-tilting module KP2 11/26. This allows the KP2 to also be used as a tailstock turning device. The counter bearing is bolted to the base (Demmler) and can be adjusted on the Demmler plate in 100mm increments. Diameter = 28mm. Turning diameter = 1200mm. Workspace survey -Connection plan -Project schedules -Assembly plans Conversion and configuration Conversion and configuration of the system from a 3D CAD model to a simulation model for Cenit. Electrical and pneumatic interconnection

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Comprehensive set of welding and cutting machines, compressors, handling, and assembly equipment. Gtjdpfx Adex Nr Ncs Uow • Includes a range of machine types such as cutting machines, milling machines, saws, compressors, and various handling and assembly equipment. • Ideal for large-scale manufacturing operations due to the variety and capacity of equipment. • The equipment list includes machines built between 1989 and 2014. Extra Information Includes diverse equipment such as plasterers, drills, screwdrivers, extractors, tables, sorting carts, shelving, and cabinets, enhancing flexibility and operational capability.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,070 h, overall weight: 12,000 kg, total height: 2,565 mm, product length (max.): 11,000 mm, number of axes: 3, This 3-axis Bystronic BySprint Fiber 3015 was manufactured in 2016, designed for precision fiber laser cutting. It handles a nominal sheet size of 3000 x 1500 mm and supports a maximum workpiece weight of 890 kg. The machine dimensions are 11,000 mm in length, 6,050 mm in width, and 2,565 mm in height. If you are looking to get high-quality cutting capabilities consider the Bystronic BySprint Fiber 3015 machine we have for sale. Contact us for more information. • Nominal sheet size: 3000 x 1500 mm • Cutting area (travel): X 3048 mm, Y 1524 mm, Z 70 mm • Maximum positioning speed: Parallel (X,Y) 100 m/min; Simultaneous 140 m/min • Accuracy: Positioning accuracy ±0.1 mm; Repeatability ±0.05 mm • Maximum workpiece weight 890 kg • Cut Control Fiber • Detection Eye • Automatic nozzle changer (40 positions) • Parts and cross conveyors in the cutting area • Dust extraction system with 200-liter drum adapter Gsdpfx Adsx Hbk De Uetw

Condition: ready for operation (used), Year of construction: 2012, total height: 2,100 mm, controller manufacturer: ESAB, controller model: EPP-360 Vis 51, number of axes: 3, This 3-axis ESAB Combirex DX 4000 plasma cutting machine was manufactured in 2012. It features the ESAB WELDING & CUTTING Vission 51 control and a Precision Plasmarc 368 plasma source. Capable of cutting up to 40 mm with plasma and 300 mm with gas, it offers a cutting area of 3000 × 13000 mm. Consider the opportunity to buy this ESAB Combirex DX 4000 plasma cutting machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Work table height: 660–762 mm • Recommended max plate width: 3000 mm • Rail gauge: 4000 mm • Internal clearance: 3683 mm • Maximum table outside width: 3454 mm Gsdex R E Smjpfx Ad Uetw • Cutting area: 3000 × 13000 mm • Plasma cuts: up to 40 mm • Gas cuts: up to 300 mm • Parking area: 1440 mm • Power requirement: 230/460/575 vac, 50/60 hz, single-phase, 30 amp (special input voltages available upon request) Extra Information Movement Axes: 3 Max Cross Travel with 1 Tool: 3500 mm Max Cross Travel with 2 Tools: 3500 mm Max Cross Travel with 3 Tools: 3300 mm Max Cross Travel with 4 Tools: 3100 mm Max Cross Travel with DMX: 3130 mm Max Cross Travel with DMX + 1 Oxy: 2920 mm Max Cross Travel with DMX + 2 Oxy: 2710 mm Max Cross Travel with DMX + 3 Oxy: 2500 mm Main Drive Plasma Source: Precision Plasmarc 368 Plasma Coolant Circulator: CC-11 COOLANT CIRCULATOR