Used Wood shredder for sale (331)

Condition: used, Catalogue number: 7536 – German production – no engine – used chipper Kjdpevu A Rpsfx Aabonc TECHNICAL DATA inlet width 530mm number of knives 2pcs shaft diameter 580mm inlet width 420mm inlet height 200mm Net price: PLN 30,000 Net price: EUR 7,060 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2023, only 466 operating hours incl. cross screw discharge incl. automatic magnetic separator Drive power: 18.5 kW Throughput: 350 - 600 kg/h Hopper: 990 x 990 mm Screen: 24 mm Blades: 27 pcs. Shredder dimensions: 1050 x 1500 x 1710 mm Shredder weight: approx. 1700 kg Storage location: customer Kodpsw Sy Ttefx Aabjnc

Condition: new, Year of construction: 2025, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Knsdpfxshupkmj Aabec Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: used, functionality: fully functional, ZENO shredder with 90 kW motor with Mesutronik metal detector Some spare parts, e.g. infeed rollers 3 sets of knives and 2 counter-knives The machine has been oiled Technical description attached Kjdoxnp T Hspfx Aabenc

Condition: excellent (used), functionality: fully functional, Klöckner 160/400 Kjdpfexl Hkksx Aabsnc Technical data: • 2 bottom pull rollers • 1 top roller • Main motor power: 55 kW • Infeed conveyor • Outfeed conveyor: 8 m • Control cabinet

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options Ksdpfxjvvx Dzj Aabenc can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: excellent (used), CATALOGUE NUMBER 7032 TECHNICAL DATA - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - working width of the rotor 580mm - main engine 18.5kW - pump engine 0.75kW - number of knives 14pcs - knife dimensions 30x30mm - sieve 15mm x 20mm - pressure drawer - electric auto reverse - dimensions l/w/h 2000x1130x1530mm Kedomgbt Ispfx Aabjnc - weight 970kg ADVANTAGES - German production - auto reverse - pressure drawer - very good condition - used chipper Net price: PLN 47,900 Net price: EUR 11,260 Net price converted at the exchange rate of 4.25 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation Knsdpfxjwhw Iuo Aabec - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine.

Condition: used, Chipper Bruks 602CS IDC000117 - drum chipper - manufacturer: Bruks - model: 602 CS - drum diameter: 600 mm - infeed opening: 540 mm X 300 mm - number of knives: 2 - maximum solid wood thickness: 180/100 - weight: 1400 kg Kjdpfxovldmaj Aabenc - standart chip length: 20-35 mm - capacity: 10-20 m3/h - electric motor: 26 kW - electric motor for fan: 11 kW

Condition: used, Year of construction: 2005, functionality: fully functional, 600 mm wide rotor Kjdpfjxcwb Iox Aabonc 18 teeth 15 kW motor power Hydraulic pressor

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E 2 x 110 kW with outlet conveyor and magnet Knjdpfexfrvfox Aaboc

Condition: used, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of Knodpfx Aasvrk A Ujbec has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Chip size (10 - 60 mm) Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 15/20 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: excellent (used), Catalog number 7361 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from the bottom - lower shaft motor 1.8kW - 2 toothed pulling shafts from the top - upper shaft motor 1.8kW - belt feeder - feed belt length 2200mm - feed belt width 330mm Knsdpfjtrwt Nex Aabsc - main motor 22kW - auto reverse - reverse gear - overall dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – German production - auto reverse (adjustable) - reverse gear - used chipper, very good condition Net price: PLN 66,900 Net price: EUR 15,750 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Hydraulic cutter for Rifile and similar 49cm roller Maximum height of the piece cm. 25 Knsdpfx Ajuk I Ubeabec complete with loading roller conveyor

Condition: used, Manufacturer: Bruks Model: 1500M Kodswagnbspfx Aabonc Productivity: 50-100 m3/h Electric motor: 110 kW After overhaul

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E Knedpfexfrunex Aabsc 200kW electric including control cabinet fully overhauled new couling unit READY FOR DISPATCH

Condition: excellent (used), CATALOGUE NUMBER 7240 TECHNICAL DATA - Inlet width: 400 mm - Inlet height: 210 mm - Shaft width: 530 mm - Shaft diameter: 500 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 55x50 mm - 2 lower toothed feed rollers - Lower rollers motor: approx. 3 kW - Upper toothed feed roller - Upper roller motor: 1.5 kW - Feed belt length: 4600 mm - Feed belt width: 400 mm - Main motor: 55 kW - Autoreverse - Feeder dimensions (L/W/H): 4630x620x760 mm - Machine dimensions (L/W/H): 2510x1700x1200 mm - Weight: approx. 3500 kg Knedpfsrby Dlex Aaboc – Made in Germany - Autoreverse (adjustable) – Used chipper, condition very good Net price: 85,900 PLN Net price: 20,190 EUR depending on the rate 4.25 PLN/EUR (Prices may change with larger fluctuations)

Condition: used, Year of construction: 1995, machine/vehicle number: IDC000049, Vecoplan VZ 60/34 V shredder For shredding wood waste and other products. Inlet width 600 mm; Kodperdykvofx Aabjnc Inlet height 340 mm; Number of cutting plates 28; Cutting inserts 40 x 40 mm; Rotor speed approx. 450 rpm; Chip or shredded product size approx. 30 mm; Capacity 2 m3/hour; Input rotor motor power 11 kW

Condition: excellent (used), Year of construction: 2001, CATALOG NUMBER 7089 TECHNICAL SPECIFICATIONS Ksdpendhbqjfx Aabenc - Feed hopper inlet: 1020x1230 mm - Rotor working width: 1020 mm - Rotor diameter: 348 mm - Main motor: 22 kW, 400V, 50Hz - Pump motor: 0.75 kW - Number of knives: 50 pcs - Knife size: 35x35x20 mm - Screen: 12 mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530 mm - Weight: 970 kg FEATURES – Auto-reverse – Comparable to WEIMA WL 10 – Manufactured in Germany – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: 105,900 PLN Net price: 24,900 EUR (depending on 4.25 EUR exchange rate) (Prices may change with major fluctuations)

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm Knedpfx Aovzw Tfjabjc - without electric motor

Condition: excellent (used), CATALOG NUMBER 7102 TECHNICAL DATA - Inlet width: 400 mm - Inlet height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 18x18 mm - Bottom toothed feed roller - Lower roller motor: 0.75 kW - Top toothed feed roller Knsdjnwmr Uopfx Aaboc - Upper roller motor: 0.75 kW - Belt feeder - Feeder belt length: 3260 mm - Feeder belt width: 400 mm - Main motor: 38 kW - Automatic reverse - Extraction connection diameter: 250 mm - Overall dimensions (L/W/H): 5200x1400x1870 mm - Weight: 2020 kg – German production – Automatic reverse (adjustable) – Used chipper, in very good condition Net price: 63,900 PLN Net price: 15,000 EUR (depending on an exchange rate of 4.25 EUR) (Prices may vary in the event of significant rate fluctuations)

Condition: used, Wood chipper Bruks 1500M IDC000079 - Manufacturer: Bruks - Chip screen: BS2 - Scraper conveyor - Belt conveyor - Cyclone - capacity: 50 m3/h Knjdpfx Aaot D Dhdobec

Condition: excellent (used), Catalog number 7291 TECHNICAL DATA - inlet width 500mm - inlet height 200mm - shaft width 630mm - knife length 630mm - number of knives 2pcs - sieve dimensions 60x60mm - toothed pulling shaft from the bottom - lower shaft motor 4kW Knjdpfx Aaorx T E Tobjc - toothed pulling shaft from the top - upper shaft motor 4kW - feed belt length 4100mm - feed belt width 400mm - feeder motor approx. 2kW - main motor 55kW - auto reverse - feeder dimensions L/W/H 4670x760x720mm - machine dimensions L/W/H 2550x1800x1300mm - weight approx. 4000kg – German production - auto reverse – used chipper, very good condition Original photos Net price: PLN 118,900 Net price: EUR 27,980 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Drum wood chipper IDC000024 - Manufacturer: Erjo, - Model: 204 MA, - Capacity: 20 - 40 m3/val., - Weight: 3000 kg, Knodpetqz Sbjfx Aabsc - Electric motor: 30 kW.

Condition: used, Drum wood chipper IDC000025 - Manufacturer: Erjo, - Model: 204 MA, - Electric motor: 55 kW, - Capacity: 20-40 m3/val. Ksdotqz Sfjpfx Aabsnc