Coordinate measuring machine

Aberlink Axiom too Manuell

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Lasdpfxegbfaxe Apdsg Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, Ljdpfx Aozh Nczepdoag 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: ready for operation (used), Year of construction: 2023, A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible. Laedpfxowx Rcyo Apdog

Condition: good (used), Year of construction: 2017, Machine is in good working conditions. Parts shown by hand not come. Lasdpfozlalhox Apdeg Technical data are on pictures.

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, table tilt +120°, -35°, 22.4kW, 10000rpm, BT40, 30 station tool changer, coolant, swarf conveyor Ljdpfezg Enqsx Apdoag

Condition: like new (used), Year of construction: 2012, Parts shown by hand not come. Lasdpfjlpcdwjx Apdeg With machine come tool holders SK 40. X 600 mm; Y 430 mm, Z 460 mm; A 150 deg x 0.001;C 360 deg x 0.001 12.000 rpm, Heidenhain iTNC 530 , 40 tool places in changer SK 40.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided Lajdpfxsziz S Dj Apdsg The machine was subsequently fully inspected and approved by DMG MORI.

Condition: used, length:1800 mm width:1200 mm weight of the machine ca.:1,6 t Laodpfx Apocxxu Dodsg dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: ready for operation (used), Year of construction: 2012, A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible. Lasdex Ih A Njpfx Apdjg

Condition: good (used), Year of construction: 2010, Machining Centre Sugino Xion-II-5AX-CE Manufacturer: Sugino Machine Limited Japan Model: Xion II 5AX CE Year of manufacture: 2010 Number of axes: 5 Travel distance X axis: 300 mm Travel distance Y axis: 300 mm Travel distance Z axis: 200 mm A axis swiveling range: -90° to +90° C axis rotation: 360° Maximum tool diameter: 40 mm Maximum tool weight: 15 kg Spindle speed: 40,000 rpm Tool holder: HSK-E32 Positioning accuracy X, Y, and Z axes: 0.002 mm Repeatability X, Y, and Z axes: ±0.001 mm Machine weight: 2,800 kg Ledpfx Asx Hqwgopdsag No guarantee is given for the correctness, completeness, or currentness of the information provided.