Filter and sack filling system

AL-KO

Condition: used, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,850 m³/h, intake manifold diameter: 160 mm, filter area: 8.25 m², total height: 1,950 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 3273 Extraction unit / dust extractor AL-KO Mobil-Jet 160 Blsdpsz Ibgijfx Af Asn Used Dust extractor for extracting wood dust and chips Motor power 2.2 kW Nominal air flow rate 1850 m3/h Minimum air flow rate 1448 m3/h Extraction inlet Ø 160 mm Negative pressure 2120 Pa Filter area 8.25 m2 Air filter category G Pneumatic filter cleaning AL-KO OPTI JET Compressed air connection 8.5 bar Chip collection container approx. 320 l Base frame without wheels Suitable for wood dust separation, residual dust content class 2 (H2), max. residual dust content 0.2 mg/m3 Type 1 (B1), suitable for extracting combustible dust in Zone 11 BG-tested, GS-tested CE marking Suitable for indoor use Electrical connection 400 V / 50 Hz, three-phase Ready to plug in, including power cable and 16 A plug Transport dimensions approx. 1700 x 800 x 1950 mm LWH Weight approx. 200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request Blsdpfx Aei Enxdsf Asn - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: used, Year of construction: 2021, 160mm inlet dia 2.2kw motor Blodpfx Ajz Hztajf Asn Max flow rate 2,000m3/hr Filter area 9.1m2 Dimensions 1688 x 830 x 2050mm Weight 330kg Serial nr - 243339219303 Year - 2021 CE

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Bsdpfx Ajwwtuijf Ajln Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Year of construction: 2013, condition: used, Features: * Used telescopic belt conveyor * Condition: fully functional, with signs of wear * Ideal for fast material transport Bledpfxoiuqcwe Af Ajn * Professionally disassembled and packed * Incl. feet * Incl. control cabinet * 3 units in stock * Price per unit Technical data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800-4x16 Belt direction: loading and unloading Color: anthracite gray Overall length, retracted: 5,550 mm Overall length, extended: 16,000 mm Overall width: 1,500 mm (incl. control cabinet) Width: 1,220 mm Belt width: 800 mm Condition: good (used) Belt type: smooth / black Conveying height: 1,100 mm Weight: 3,300 kg Two speed levels can be set. Telescopic belt conveyor The telescopic belt conveyor is ideal for linking machines or workstations in the picking area and optimizing internal processes. During transport, the telescopic belt conveyor can transport sensitive and differently sized containers, boxes, or other packaging and article units to the delivery or collection point and can also be used as a connecting section before or between production and processing machines. In addition, it enables efficient parts transport within the company and warehouse and is used for conveying significant quantities of goods over long distances. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Condition: new, The AL-KO CLEAN VAC central vacuum units are the ideal solution for direct extraction from handheld processing machines and as central vacuums for cleaning entire workshop or production areas. Wherever high suction power is required or long piping runs need to be bridged, AL-KO CLEAN VAC units are the perfect solution. Applications: - Extraction for handheld processing machines, e.g. in joineries, grinding shops, training workshops - Cleaning vacuuming of floors and machines in workshops, production areas or warehouses Bjdpfxowwt Aae Af Aeln - Direct extraction at small diameters such as filling stations, dosing systems, etc. Advantages: - High suction power up to 25,000 Pa negative pressure - Perfect plug & play: fully pre-assembled at the factory. Fully operational after connecting power and compressed air - 100% air recirculation via M-class dust filters (residual dust < 0.1 mg/m3) with optional H13/H14 post-filter stage - Attractive appearance and additionally weatherproof - Low-noise operation thanks to sound-insulated and powder-coated housing - Easy handling: set up, connect, immediately ready for operation at the customer’s site

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area Bsdpfx Afjwwt E Us Aoln

Condition: refurbished (used), Year of construction: 2020, Dear customers, To ensure a fast and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This allows us to directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! Bsdpjfr T Eqefx Af Ajln TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Transition from square to round: 150 EUR net Paint stop filter mat clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design Bledpfxowv T R Uo Af Aen - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors Bljdpfx Afjwwt Tle Ajn - Simple, tool-free filter replacement - Numerous options

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 170 mm, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI TYPE T4MO - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994 Blsdpfx Asx Rw Iysf Aon

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning Bljdpfx Afefydzbe Aon lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm Blsdpjfyadbefx Af Aen - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: refurbished (used), Year of construction: 2020, Dear Customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWi 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Airflow: 10,800 m³/h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Bledpefr T Emsfx Af Aon Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping rail (+180.00 EUR net) Options/Additional cost for: Transition from square to round: 150.00 EUR net Paint stop filter mat clamping rail: 180.00 EUR net Side guide plates with hinges: 590.00 EUR net Images may vary. We would also be happy to offer you complete spray booths with air supply system, heat exchanger, air supply ceiling, piping, etc. Simply contact us.

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Bedofzbqyjpfx Af Ajln Weight net 1,040 kg