Bending cell

Amada Astro II 100 NT

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Laodpoxf Iamjfx An Iod Some accesories and machine equipement are also available. More specs of the machine, check last two pictures.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. Lsdpfstvau Aox An Iead MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Lajdpfxjixz D Uo An Iod Guillotine RAPIDO is fast reliable shearing machine. Depends on sheets length there are guillotines with different working lengths available: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Machine can do up to 35 cuts per minute. The drive system with eccentrics, pulldown rods, and hold down system which can be positioned as close as 2.5 cm from the knives allow for easy and expedient trimming of narrow strips. RAPIDO guillotine shear is equipped with squaring arms on both sides and the LED cutting line light. Available working lengths: 2600 mm / 3200 mm / 4100 mm

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Ledpfx Aeif Ek Rjn Isad Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, machine/vehicle number: VASCA ADIGE NUOVA, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space volume: 28 m³, suspension: air, tire size: 385/65 r22,5, color: white, TANK SEMI-TRAILER, TILTING; VARIOUS UNITS AVAILABLE, WITH CAPACITIES OF 26/28 CUBIC METERS; PRICE NEGOTIATION TO BE CONDUCTED IN PERSON; ELECTRIC TARPAULIN COVER; FIRST AXLE, LIFTABLE AND STEERABLE; DISC BRAKES; PNEUMATIC SUSPENSION; Lajdpegw Raljfx An Iod TIRES: 385/65 R22.5; WHEELBASE: 3000 MM.

Condition: ready for operation (used), Year of construction: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Upper and lower polishing unit Machine Benefits Technical Machine Benefits • Positioning workpiece height adjustment: 8-60 mm Lodex D Hbtjpfx An Ijad • Turntable magazine diameter: 750 mm for edging material 0. 4-3 mm in roll • Rotary magazine of edging material with ball bearing, diameter of plate: 740 mm • Gluebox application unit • Trimming unit with two motors: 0. 35 kw (1 ps), 12000 rpm hw saw blades, z 24, d-100x20x3. 2 mm, pneumatic tilting 0°-10° • Upper and lower multifunctional milling unit // upper and lower profile sander x-motion plus for machining plastic edges 2 and 3 mm • Controlled corner unit with 2 motors, motorized adjustment for milling the front profiles of the upper/lower edge for edge thicknesses of 0. 4-3 mm and feed rates up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed ​​12000 rpm, 2x 1. 5 kw • Edge and workpiece thickness measurement using bluetooth technology Extra Information Power supply: 3x400V 50/60Hz Chain feed with 2 gears, Feed rates: 10 and 18 m/min Control Unit x-motion Plus control with 15' SmartTouch

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%) Ljdsw R Sknjpfx An Ioad

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Ljdsdqzcxjpfx An Ioad Location: In stock at 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Lajdpfxow A H T Ao An Ied Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t Ledovr Hgvepfx An Ijad dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW