270M-500-210

ARBURG

Condition: excellent (used), Year of construction: 2007, operating hours: 88,631 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, plate length: 795 mm, plate height: 790 mm, total length: 5,100 mm, total width: 2,000 mm, overall weight: 9,000 kg, Arburg 520A-1000-400 (246) hybrid injection molding machine with sorting flap and gas boost Number: 246 Availability: in stock Year of production: 2007 Producer: Arburg Gbodpfezzb N Hox Aatjt Injection molding machine condition: used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1600 Column spacing [mm]: 520 x 520 Plate size [mm]: 790 x 795 Control type: Selogica Tongue: german Installed power [kW]: 21.2 Working hours [h]: 88631 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Feed hopper: NO Robot socket: Yes Air valve: 3x

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! Gbsdpfx Ajyrczgsatjt If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Gedpfjzy I Tpox Aatjbt Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Gbedpfx Aezy I Sxoatst Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Gsdpfxjyiz U Te Aatjbt Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Gsdpozy I Rzsfx Aatsbt Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2006, Arburg 570C 2200-1300 / Hybrid Machine Year of manufacture: 07.2006 Injection unit: Screw diameter: 55 mm Shot weight: 469 g Injection pressure: 2380 bar Dosing volume: 558 ccm Clamping unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Size of the platens: 795x795 mm Gedpfx Aszy I Rueatjbt Ejector: hydraulic Clamping unit: hydraulic Controller: SELOGICA Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Controller with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Dimensions: Weight: 9300 kg Length/Width/Height: 5.16x2.06x2.39 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1000-350 Baujahr: 1999 Schließkraft: 100 Tonnen Holmabstand 420 x 420 mm Schnecken DN: 40 mm Gsdpfx Aju E E Hlsatjbt Dosiervolumen: 182 ccm³ Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Ausstattung: -Roboter, Hersteller: GEIGER, Typ: LR21, BJ 1998 -2 x Kernzug

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Gbsdpfezy I Rnsx Aatot Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K machine Air valve x 1 Hydraulic core pull x 5 Godpfxezy I Rho Aatjbt Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit - screw diameter: ⌀25 mm - 49 g/shot A rotary table can be purchased for an additional charge. Dimensions: Weight: 7300 kg All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request.

Condition: good (used), Manufacturer: Arburg Year of manufacture: 1998 Gsdpfszl Dycjx Aatsbt Machine number: 174514 Type / Model: 420-1000-350 Operating hours: 65,000 h Automatic operating hours: 57,000 h Clamping force: 100 t Opening stroke: 500 mm Control system: Selogica Tie bar spacing: 420 x 420 mm Platen dimensions: 570 x 570 mm Minimum tool height: 250 mm Maximum distance between platens: 750 mm Screw diameter: 40 mm Maximum injection volume: 182 cm³ Shot weight: 153 g Holding force: 5 t Connection: 33.4 kW Accessories/Equipment: 2 core pulls, handling connection, pneumatic air valve Condition: good Weight: 3.43 t Dimensions: 3,200 x 1,100 x 1,800 mm

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production line with Geiger robot Gedpezy I Rbefx Aatjbt Year of manufacture: 2012 Injection unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 ccm Clamping unit: Clamping force: 160 t Tie bar spacing: 520 x 520 mm Platen size: 695 x 695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Control system with 12 hot runner zones Reinforced injection units – bimetallic Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast operation) The machine features a built-in servomotor in the injection unit responsible for dosing the plastic Parallel movements Screw diameter in the vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg brand conveyor belt and sorting flap Original Weber brand rotary table, highly precise – electrically driven (integrated inverter in the machine) Rotary table and robot available as an additional purchase Dimensions: Weight: 8140 kg Length/Width/Height: 4.81 x 1.84 x 3.45 m All offered machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided, or you can participate in live technical tests at our facilities in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Gjdezy I N Ropfx Aatebt Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, mileage: 1,00,000 km, power: 132 kW (179.47 HP), first registration: 08/2023, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 2): 80 kg, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, Front axle: Steering; Tyre profile left: 90%; Tyre profile right: 90%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 80 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Empty weight: 5.499 kg Carrying capacity: 1.991 kg GVW: 9.481 kg Tail lift: Dhollandia, 1499 kg Godpfx Aaozlrraetebt = Additional options and accessories = - Camera system - Outside temperature display - Radio - Reversing camera - Suspension seat 2x - Visor = Remarks = New Tacho 2 4 Binding rails

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side-Mounted Arburg Multilift H Robot Gbjdpfx Ajzy I Nqjatot Injection Unit: Screw Diameter: 55 mm Shot Weight: 434 g Injection Pressure: 1,650 bar Dosage Volume: 474 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Distance: 520x520 mm Platen Size: 695x695 mm Ejector: electric Clamping System: toggle lever Control System: SELOGICA touchscreen Additional Equipment: - Hybrid machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Control with air valve - 1x hydraulic core pull - 12x hot runner control circuits - Injection unit: hardened – bimetallic - Main motor: servomotor driven by frequency inverter – energy saving - Injection unit powered by servomotor controlled by inverter - Machine equipped with nitrogen accumulator/cylinder for rapid operation (additional charge) - Central lubrication - Automatic mold height adjustment - Kistler sensor for mold pressure control - The injection molding machine was operated in a so-called "cleaning room" and includes additional protective measures against contamination and two vapor absorbers - Side-mounted Arburg Multilift H robot Year of manufacture: 2013 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Robot and conveyor belt available at additional cost Dimensions: Weight: 6,680 kg Length/Width/Height: 5.03x1.56x2.21 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request