Screw compressor GA250VSD

Atlas Copco GA250VSD

Condition: excellent (used), Year of construction: 2014, operating hours: 8,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 800 mm, table length: 630 mm, table load: 850 kg, overall weight: 12,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 8,500 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Used Hermle C42U, year 2014, equipped with Heidenhain iTNC 530 control. Travel ranges: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: - Heidenhain iTNC 530 control - Linear axes - Spindle speed: 18,000 rpm - Spindle taper: HSK-A63 - Tool magazine with 42 positions - Additional magazine with 43 positions; total 85 tool stations - NC rotary swivel table 800 mm x 630 mm - Worm drive in the C-axis - Table load capacity: 850 kg - ICS 80 bar with paper band filter - Scraper belt conveyor - Air purge for scales - Bed flushing - Air blast through spindle center - Emulsion mist extraction - Chip flushing gun - Manual cabin door - Automatic cabin roof - Electric thermal compensation - Polycarbonate safety windows - Electronic handwheel Dkedpfx Afeyrunlsuei - Heidenhain touch probe

Condition: like new (used), Year of construction: 2021, operating hours: 337 h, Multivac R535 Thermoformer The R 535 thermoforming packaging machine is the largest configurable machine system from MULTIVAC. It offers a uniquely wide range of equipment options as well as an extremely high packaging output. Thanks to the unique diversity of the R 535, MULTIVAC is able to meet the most challenging of customer requirements. This R 535 is from 2021 and has only 337 production hours and is in new condition. The machine is including the following equipment: - Bell Mark – IntelliJet TSX 10” Thermal Inkjet Printer; - Chilly 45 chiller Manufacturer: Multivac Model: R535 Year: 2021 Dkodpjxfq D Ujfx Afuji Production Hours: 337 Film Width: 645mm (Top)  / 645mm (Bottom) Stroke Length: 500 mm Max. Forming Depth: 75 mm Vacuum Pump: Busch 105m3/h Capacity: Max. 12 cycles/min Machine Dimensions LxWxH: 1.050x175x225 cm Machine Weight: 2.000 kg.

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper Dodov T D D Uspfx Afueki High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Condition: new, Year of construction: 2025, 0330 mm Dkodjwp Tq Uspfx Afuei 210 mm 1000 mm 167 mm 40 mm 2,2 kW

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Available from Q1 2026 Technical data Blister module (B 1770) Max. output 700 blisters/min Application area: solid products Dkedsv D Ipijpfx Afuji Max. format range [feed x width] 200 x 284 mm Cartoning module (C 2305/C 2504) Max. output 300 or 500 folding boxes/min. Application area: blisters Max. folding box size [A x W x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm For details, see PDF

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Dksdpfx Afsn N Ekceuji Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Dksdsuxdhuopfx Afuei

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Dodpfx Aoxk U Aljfujki Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, HEIDELBERG SM 72 ZP - 1991 CPC Dkjdpeyl I Ixofx Afuji CP TRONIC PERFECTOR BALDWIN Alcohol dampening 185 mios tools, documentation and very good condition

Condition: new, Centre length ----- 1000 mm Centre height ----- 180 mm Swing diameter ----- 360 mm Main spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1350 kg Djdega Ty Espfx Afueki INCLUDES * 3-axis digital readout brand SINO * Quick-change toolholder type Multifix TOOE5 with 4 tool blocks * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm * LED work lamp and coolant system * Fixed and travelling steady rest HEAVY-DUTY DESIGN WITH CAST IRON BASE