Workshop press

AYEL-TECH WP 60 Werkplaatspers 60 ton

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection - Manual Nksdpfx Adoxbzqqowjt The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Nksdstt Nd Ropfx Adwet Saw capacity 45º: 250 mm round 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn Nsdjfqpxiopfx Adwokt - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: refurbished (used), Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Nodpfx Ajfmavxsdwjkt Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar. More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Nsdpjwki Apefx Adwjkt Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Nkjdowk D Efepfx Adwst Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW Nkodpfsnzpx Rex Adwst -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Nkodot Iklkopfx Adwjt Weight: approx. 3,000 kg

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes * Njdpfx Adou Ixznswjkt

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Max. swing dia. over bed 356 mm Max. swind dia. without swivel bed bridge 506 mm Center height 180 mm Max turning diameter over cross slide 220 mm Max. turning length 1000 mm Spindle face D1-4/DIN55029 Spindle bore 38 mm Threads that can be cut Metric, Withworth, Module, Spindle speed 45 – 1800 rpm Tailstock taper Morse 3 Tailstock sleeve travel 120 mm Motor power 2.4 kW Machine weight 900 kg Machine dimensions 1945 x 785 x 1204 mm Accessories - 3-jaw D160 mm chuck - 4-jaw D200 mm chuck - Face plate D320 mm - 3 axis DRO - Electromechanical spindle brake - Steady and travelling rests - Center - Coolant unit Nedpfx Adoxbz Ebswokt - Halogen work lamp - Splash guard - Chuck protection - Tool post protection - Manual Brand new center lathe with zero working hours. Showroom model.