Head Drill Cutter

Balestrini

Condition: new, Year of construction: 2023, Orbital sanders are made for sanding straight, curved and shaped pieces with a round or oval section etc. and with a variable thickness for chair, table, bed and associated items. The machines main features are: Frame in electro-welded steel - Rotating disk with 2 opposing abrasive belts driven by an electric moto, with a revolving movement around the workpiece - Electrical control panel - 2 Adjustable workbenchees (inlet - outlet) - Possibility of fitting 2 automatic workpiece-feeding units with adjustable speed by means of inverter. Abrasive belts: 80 x 1260 mm Min-max. workpiece diam.: 10-100 mm (fi) Min. curvature radius: 200 mm Dimensions: 760x1000x1800 mm 3 pieces. Godpfxjqnufvj Ah Hoil Camam, Comec, OMEF, Brusa di Garboli

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis Gisdjt R T Hcjpfx Ah Hel 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), SCM Multiflex angle centre for single-sided cross and longitudinal machining of window and door corners Tensioning spindle length 320mm, max. working range 320mm Gsdpfowmcnwjx Ah Hoil Feed system with rollers Profiling spindle length 320mm, max. working range

Condition: new, IMH-OBC-Optimized block saw Cuts blocks for four-way pallets. How does the machine work? The block material is loaded onto the chain conveyor and transported to the pusher, which feeds it to the cutting zone. The block material is measured by the machine before cutting and it also calculates which lengths need to be cut in order to optimize usage and produce no waste (or as little waste as possible). The machine can process 4 different block lengths in the same pass and each block can be optimized separately. Optionally, the machine can be equipped with a double drive, which enables the simultaneous processing of two different block materials. block materials at the same time. The feed chain and the circular saw blade are driven by a standard electric motor, while the linear module is driven by an AC servo for optimum performance and precision. The measuring arm, the material holder in the saw and the air blower are pneumatically operated. Giodpfxjrkk Udj Ah Hsl The machine is controlled and monitored by its own PLC via a control panel. The machine is designed for continuous and reliable processing of pallets. It combines professional precision with a user-friendly set-up. Changeover time 1-5 minutes Block length 75 mm* 45 blocks / min * Block material length 3 900 mm or longer. Block: 75-150 x 75-150 x 75-100 mm ( length x width x height ) Squared timber material: 800-5800 x 75-150 x 75-100 mm ( length x width x height ) This machine is available in different versions. IMH has various additional machine modules that can easily be added to existing machines to achieve a higher degree of automation. This is just one example of the many possibilities that can be realized with IMH machines. Since 01.01.2024 we have taken over the exclusive representation for IMH machines in Germany. The range includes high-quality machines for pallet production that are known for their quality and reliability. Please contact us to find out more about IMH machines or to arrange a personal consultation. Gebrüder Göbel - your partner for IMH machines in Germany. We look forward to supporting you with your projects!

Year of construction: 2022, condition: new, Pallet Board Stacker New upgraded M4 version. Included: - Unscrambler Godpfx Ahohhnblo Hjil - Stacker with integrated lift - 2 spacer dispensers with support frame - Outfeed conveyor (one pack on the lift on on the outfeed) - pack lift for easy forklift operation

Year of construction: 1998, condition: excellent (used), I sell the window production set: Gijdpfx Ajfzzhysh Hsl 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Year of construction: 1984, condition: used, machine/vehicle number: 57051/4, Manufacturer: Rhode & Doerren mountain (May) Model: SS 40 U M. Nr: 57051/4 Year of construction: 1984 Weight: 950 KG General information / technical data: used drill grinder from German production for 2, 3 and 4-bladed tools in good condition. Diameter range: from 5mm to 40mm Wekzeuglaenge: 500mm Giodpfxsc Nv S Aj Ah Hel Point angle: from 80° to 160 ° Clearance angle: of 1 ° 30 ' up to 10 ° Wheel: 210 x 127 x 50mm (disc) Tool body: 2, 3 and 4 edged drill and countersink Tools grinding direction: cutting left & right Dimensions machine: (l x w x h) 1350mm x 1100mm x 1400mm Power supply / control voltage: 380Volt 50 HZ / 220V motor power / total power: 2,2 KW / 2.55 KW Optional accessories: • 2 wheel shots with grinding wheel • 8 piece collet chucks for drill bit recording make Forkardt • 6 piece MK recording & drill extensions • Coolant system • Documentation of the machine & electric schematic Comments: The machine is with us in the camp under power and is ready for a demonstration by arrangement.

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros. Gsdpshm Exdjfx Ah Hjil

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 Giedpfxoixxwmo Ah Hjl High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: new, Year of construction: 2026, Drilling machines for bottom hinges and window handles for precise and efficient drilling of windows. Short introduction: Gijdjdx R Hzspfx Ah Hol • No setup times between drilling of bottom hinges and window handles • The advantages of drilling from underneath • Accessory kit for bottom hinges • Drilling pattern according manufacturer (e.g. G-U, Roto , Maco, Siegenia Aubi, Winkhaus ... and other manufacturers) • Accessory kit for window handles • Massive precision drilling unit from GANNOMAT