Suction table

BECK BE-100-80 H

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Nsdpfx Adsvtckmowjcl Manufacturer: unknown Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Note: The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your service team, Mertens & Frowein GmbH

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Nsdpexpiw Uefx Adwecl Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Year of construction: 2005, condition: used, Technical details: total power requirement: 24,47 kW 1 Centrifugal Wheel Shot Blasting Machine WheelLaborator Group GmbH, Schlick HB10/12 ROTOJET HB 10/12-5.3-2 Year of manufacture: approx. 2005, Serial No.: 043 (Overhead conveyor shot blasting machine) W/h: approx. 44760.82, with infeed and outfeed conveyor chain, shot blasting rods, control cabinet Nsdpsxyk Atefx Adwecl *

Condition: used, EQUIPMENT 1°) Model CD 200 – PN Vibratory deburr * with sound deadening lid. * parts separation * work bowel volume : 200 [L] * diameter : 1085 [mm] - weight : 475 [kg] Ncedpfsug U Eqsx Adwel - overall dimensions : 1.560 x 1.350 [m] 2°) Model BFHL 350 / 3300 Hot air belt dryer * weight : 1200 [kg] - overall dimensions : 2.470 x 1.03 [m] 3°) Model SDT 1500 Rotary table * table dia : 1500 [mm] * max load over table : 25 [kg] - weight : 100 [kg] 4°) Model ZM03-FL Centrifugal filter * recycling process water - weight : 250 [kg]

Year of construction: 2018, condition: ready for operation (used), Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible. Njdpfx Adsxtprtswscl

Condition: excellent (used), functionality: fully functional, Offered are 20 bulk goods buckets/transport buckets. Blasted and repainted. Dimensions: 1.26 m x 1.26 m x 1.46 m (LxWxH) Ncsdpeq Hd Nxofx Adwel With adjustable spout, closes watertight, Capacity: 1.00 m³ depending on density 1 - 1.3 tons.

Year of construction: 2012, condition: ready for operation (used), A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible. Nsdpfoxdm Uaex Adwocl

Condition: good (used), functionality: fully functional, Year of construction: 2002, load capacity: 500 kg, lifting height: 1,000 mm, total length: 1,960 mm, total width: 980 mm, color: blue, Scissor lift table with pneumatic system Nodpsxt Em Hjfx Adwecl

Condition: ready for operation (used), load capacity: 550 kg, nominal power: 69 kW (93.81 HP), Hindenlang TPEVA - 550 - Induction oven Kind of: Induction furnace Max temperature: 850° Nedpfxsxpkhno Adwecl Capacity: 900 x 750 mm x 550 kg Voltage: 400 V / 100 A