Band saw

BEHRINGER HBP430

Condition: good (used), Year of construction: 1997, functionality: fully functional, For sale: 1 used horizontal band saw including infeed, outfeed, and loading magazine Manufacturer: Behringer Type: HBP430/854GA5000 Equipment: 2x cross-transport chain conveyors, driven roller conveyor, stop system Ppedpowhcv Rofx Akfor Saw drive: Dietz 7.5 kW Flat cutting capacity: 90° 880 x 500 mm / 45° mm Round cutting capacity: 90° 500 mm / 45° mm Saw blade speed: continuously adjustable Saw blade: 7200 x 40 mm Coolant system: Cooling water Installation dimensions: 26500 mm / 6000 mm / H2100 mm Weight: 16000 kg

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm Pedsvxwkfepfx Akfepr dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: ready for operation (used), Year of construction: 1986, Behringer 2-column bandsaw semi-automatic HBP 430, year of manufacture 1986, fully operational. Cutting capacity for round material: 430 mm, 90° cuts, hydraulic material clamping and sawing, coolant pump, 2-speed motor with stepless speed control. Roller conveyor 1400 mm with end stop. Space requirement for saw approx. 2700x1100 mm, height 1700 mm. Pedpfx Akew Thv Ssfjpr

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Ppodpfx Akevpafyofer Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system Ppodjwl Dptopfx Akfor -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Pjdpfxsv S E Ede Akfjpr

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm Ppjdpjupg Scjfx Akfor strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control Ppsdocdrmmspfx Akfer

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: Ppsdpfxomidyis Akfer - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. Pjdpfx Akjf Ekngjfjpr • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.