DOUBLE-SIDE EDGE BANDING MACHINE –BIESSE

BIESSE Stream SB2 10.5

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Fjdpfx Aheu Rc Ane Dopr Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 99,000 EURO!!! Price valid only until December 31, 2025. Don’t miss this opportunity! We invite you to purchase a NEW and outstanding HOMAG SAW-TEC B-400 Pro Line panel saw—extended version with automatic storage handling capabilities. The SAWTEQ B-400 model is a HOMAG panel saw featuring automatic loading, capable of performing cuts at exceptional speeds. Designed for high-volume panel processing, the SAWTEQ B-400 ensures top-quality finish cuts and is distinguished by its reliability, precision, high power, and fast operating speed. The saw we offer is BRAND NEW. It was purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly from the manufacturer to our facility. The machine was only started up by the HOMAG POLSKA Sp. z o.o. service team and has not been used since. In the industry, neither this model nor the Homag brand needs introduction—Homag is recognized globally as a leader in the production of state-of-the-art, high-quality equipment. Fedpfxsw Exk Es Ah Dopr Our model comes exceptionally well-equipped and is nearly fully loaded. For reference, a similar saw in the basic version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and additional equipment, costs around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput enabled by automatic loading and substantial saw blade extension. - High efficiency with relatively low space requirements. - Designed for optimal material flow and precise logistics. - Engineered for integration with networked production processes. We maintain direct contact and support from the HOMAG manufacturer if installation and commissioning are required at the new owner’s site. We believe that the discount we offer—over 45% off the new price—provides an extremely attractive option for buyers seeking a modern saw compatible with automatic storage, or for those who may utilize this feature in the future. This translates to a saving of roughly 90,000 EURO net or approximately 400,000 PLN net*. The saw can, of course, also be operated without an automatic storage system. General terms of sale: - The machine is BRAND NEW, produced in 2020, but we do not provide a warranty or guarantee. - No returns are accepted. - The price quoted does not include VAT (23% for Polish buyers), which will be added to the invoice—please ensure you verify how we display pricing in the listing. - Single ownership. * Price in EUR converted at the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all Machineseeker users. We are new to Machineseeker. Please note, we are not a furniture producer, manufacturer, or machinery trading company. We are a property developer in Warsaw (the capital of Poland) and own numerous properties locally. The machinery we list is our property, obtained through settlements with tenants from the furniture industry. We know the machines’ history and their condition matches our descriptions. We are in direct contact with the machines’ manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—for any additional support that may be needed. Since we do not require these machines, our prices are very attractive, especially as these machines are virtually unused. We can assist with transport anywhere in Poland or within the EU. We invite you to inspect the equipment before purchase. Kind regards.

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. Fodpfxeu Rim Hs Ah Djpr * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: ready for operation (used), Technical characteristics Panel width : 240 mm to 1200 mm Panel length : 240 mm to 3000 mm Panel thickness : 10 mm to 60 mm Band thickness : 0,3 mm to 3 mm Pin inner axis : 500 mm ENTRY / EXIT : Transfer realised with special chains covered in stainless long lasting rubber Entry pivoting guides adjustable depending on panel type Closing device on above pressor to assure the pressing of the panel against the pins Delaying device in entry for optimization of different width panel dimensions Single part rigid structural longitudinal chassis ADVANCE CHAIN : Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level Chain pin inner axis 500 mm BELT PRESSOR SOUNDPROOF CABINS All machining groups inside the machine are surrounded by soundproof material Internal lighting CN command placed at entry of the machine, fixed chassis side NUMERICAL CONTROL Video interface Positioning axis control Chain advance speed tuning Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management Sequenced motor startup Possibility of connection to a barcode reader Module NC410 MILLING GROUP Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm Motor power : 5.8 kW Tool Ø : 200 mm DOUBLE SUPERPOSED SPLINTERS Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal Cast iron bearing structure Tool speed rotation : 6000 rpm Motor power : 5.8 kW Tool Ø : 205 to 250 mm EXTENSION MACHINE to 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device allows support of parts that due to their dimensions or thickness can subdue central bending Fully automatic activation GLUING GROUP SP3 Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue Independent Teflon covered changeable glue tank Glue level sensor inside the tank Glue input roller speed synchronized with the chain advance Breveted pre fusion device Glue granule container (8kg) Band presence detection device Automatic band changing procedure 6 POSITION MOBILE BAND CHARGERS END CUTTING End cutting unit for edge thicknesses up to 3 mm Device for quick removal in stroke Automatic exclusion of the unit when the motors are stopped Speed : 12000 rpm Panel projection : 35 mm Edge thickness : 0.3 to 3 mm Panel thickness : 10 to 60 mm Interval between 2 consecutive panels : 350 mm WHOLESALE TRIMMING UNIT 2 superimposed motors with horizontal axis Automatic pneumatic exclusion of the group Speed : 12000 rpm Motor power : 1.3 + 1.3 kw Panel thickness : 10 to 60 mm Tool diameter : 80 mm ANGLE TRIMMING GROUP The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops The in-line stops are automatically selected by the control Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool Tools are equipped with 20° chamfer and 1.5-2-3 mm radius Speed : 12000 rpm Motor power : 0.65 + 0.65 kw Panel thickness : 10 to 60 mm TOP / BOTTOM ROUNDING GROUP Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel Quick release system of the motor-holder groups Automatic exclusion of the tool with stopped motors Tool rotation speed : 12000 rpm Motor power : 0.3 kw Fpodpfjtrihvox Ah Dsr

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Fjdpfx Ahewhi Slo Depr Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: used, machine/vehicle number: 007641, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Fedpfowuz R Hsx Ah Dopr Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Operating Units Right Side: 8 nr Operating Units Left Side: 9 nr

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Double-sided edgebander Stefani Evolution C Year of production: 2012 Technical condition: very good The Stefani Evolution C is designed for precise edging of straight and profiled edges of furniture panels made from various materials such as particle board, MDF, or plywood. Thanks to its advanced functions and high-quality construction, this machine ensures excellent results in the production of office, kitchen, and bathroom furniture as well as other interior furnishing components. Working width max: 3200 mm Working width min: 225 mm PC control Software: Stefani Winedge Plus v06.14.000 Fedpfxju U N Agj Ah Dopr Longitudinal processing Cross processing