Boiler 5 MW, rated at 3.5 MW
Biomassekessel Urbas 5 MW

Name: Biomassekessel Urbas 5 MW
Brand: Biomassekessel Urbas
Availability: InStock

Year of construction

2002

Condition

Used

Location

Szymiszów

Boiler 5 MW, rated at 3.5 MW Biomassekessel Urbas 5 MW

Show map

Machine data

Machine type:: Boiler 5 MW, rated at 3.5 MW

Manufacturer:: Biomassekessel Urbas

Model:: 5 MW

Year of construction:: 2002

Condition:: excellent (used)

Price & Location

Location:: Ligonia 13, 47-161 Szymiszow, Polen

Call

Details about the offer

Listing ID:: A20524660

Update:: 26.12.2025

Description

We offer a biomass boiler from the renowned company Urbas – a top-of-the-line product for burning moist biomass.
Manufacturer: URBAS Austria
Type: UR-FRR
Output: 5 MW, Type-certified from 3.5 MW
Year of manufacture: 2002
Water temperature: 110 °C
Operating pressure: 6 bar
Boiler type-certified due to legal requirements and the absence of an electrostatic precipitator.
Electrostatic precipitator reduced from 3.5 MW
Fuel: Wood chips, bark, sawdust, Granulation: G 100, Maximum humidity: 60%
The offer includes:
Electrical barrier set, complete labeled wiring
Pumps and valves set, sensors and probes, thermometers, piping, a multicyclone (smoke pre-filter), hydraulic ash removal from the boiler, hydraulically driven grates, and a hydraulic airlock under the firebox.
The hydraulic fuel supply with hydraulic pump, approximately 6 meters long, is equipped with an automatic fire extinguishing system in case of flame flashback.
Lambda probe in the flue pipe.
Approximately 12 m horizontal flue pipe.
Fpsdpfexwnxyox Ag Rsb
Set of recirculation fans, a flue gas fan controlled by a furnace vacuum sensor and temperature. Circulation pump, three-way valve, and shut-off valves. Complete documentation of the electrical installation and program description.

Optional at extra cost:
1. Push-through floor from the fuel storage area, 2 racks, floor dimensions 3.8 m x 10 m, including hydraulic pump and complete hydraulic hose set.
2. Insulated, double-walled stainless steel chimney, 500 mm inner diameter, approximately 15 m high.
3. Complete dismantling
Including opening and closing the roof, crane operation, loading, and photographic documentation of the dismantling.

Price to be discussed. Or joint dismantling with ATS Maszyny and the buyer's fitters. Price to be discussed
Dismantling date: from April 6, 2026

Seller

Registered since: 2006

10 listings online

Call

Send inquiry

Telephone & Fax

+48 77 45... show

These listings may also fit your interest.

Listing

Double shaft multi-saw with a feeder A. COSTA LEOPARD D

Strenči

5,940 km

Double shaft multi-saw with a feeder
A. COSTALEOPARD D

Call

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm Fpsdpfxjwrw D Re Ag Reb number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

See details

Listing

CNC Lathe with c-axis DOOSAN - PUMA 700 DOOSAN Puma 700 M

Babberich

7,060 km

CNC Lathe with c-axis DOOSAN - PUMA 700
DOOSANPuma 700 M

Call

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Fsdex Eivpopfx Ag Rspb Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

See details

Listing

Strenči

5,940 km

Pellet presses
BühlerRPWPR 900.138 EX

Call

Listing

Machining center WMW HECKERT HEC 800 Athletic

Mamer

7,070 km

Machining center
WMW HECKERTHEC 800 Athletic

Call

Condition: excellent (used), Year of construction: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Fpjdpfxjvgxfys Ag Rob Travel Y: 1100 mm (vertical) Z travel: 1300 mm Pallet size: 800 x 1000 mm Table load: 2000 kg NC rotary table with direct drive Positioning: 0.001° Max. Max. speed of the rotary indexing table: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 KW (25%) / 28 KW (100%) Spindle torque: 1210 NM / 680 NM Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 places Max. Tool diameter: 325 mm Max. Tool length: 800 mm Max. Tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in the tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools

See details

Listing

Loos U-HD 800kg/h 13Bar Loos U-HD 800kg/h 13Bar Loos U-HD 800kg/h 13Bar

Neumarkt

6,678 km

Loos U-HD 800kg/h 13Bar
Loos U-HD 800kg/h 13BarLoos U-HD 800kg/h 13Bar

Call

Listing

6 spindle automatic lathe Schütte SF 26 DNT

Sternenfels

6,866 km

6 spindle automatic lathe
SchütteSF 26 DNT

Call

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Fsdpfxoi Hb Sze Ag Ropb Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

See details

Listing

Circular saw flat motor KATT 11 kW für Kappsäge PAUL 27 AO

Scheeßel

6,837 km

Circular saw flat motor KATT 11 kW
für Kappsäge PAUL27 AO

Call

Listing

CNC Deep Hole Drilling Machine Auerbach IA3 TLF-U

Heilbronn

6,843 km

CNC Deep Hole Drilling Machine
AuerbachIA3 TLF-U

Call

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Fsdswcldajpfx Ag Rspb Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

See details

Listing

Weishaupt gas burner Weishaupt Monarch G7/1-D

Wuppertal

6,990 km

Weishaupt gas burner
WeishauptMonarch G7/1-D

Call

Listing

Morbach

6,991 km

Roller table
H.I.TRollenbahn

€7,000

ONO plus VAT

Call

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Fpedpfjihpn Nox Ag Rob Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

See details

Advertise here