Drilling machine

Caser F.32

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Cgedpfx Aot Hw Uvobcjn Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Cjdpet Hwt Sofx Abcogn Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: used, bore capacity in steel (diameter) / mm arm length / mm workpiece height max. / mm total power requirement / kW weight of the machine ca. / t required space / m Table dimensions: 800x800mm Height: 590mm Cgjdpfxeud Ttne Abcen

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Table 1000 x 1000 Cgsdpfx Aet T Rkdebcon

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 Cjdpfju Idtpjx Abcogn table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates control panel with boom *

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench * Cgedpfxov S Ay So Abcon

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm - Max. distance spindle – base plate: 350 – 1650 mm - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables - Coolant system Cgsdpox Ei D Aefx Abcsn - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: ZB-10727, Offer 25499 Technical Data: - Drilling capacity: 62 mm - Tapping capacity up to: M 46 mm - Tool holder: MT 5 - Spindle stroke: 315 mm - Spindle speeds: 38 – 2000 rpm - 6 feed rates: 0.06 – 1.00 mm/rev - Drive: 400 V / 5.5 kW - Throat min. / max.: 350 / 1600 mm - Distance spindle – machined base plates min / max: 350 / 1250 mm - Machined base plate with T-slots: 1650 mm (W) x 930 mm (D) - Electrical central clamping - Coolant system + lighting - Cube table - Required floor space approx.: 2500 (W) x 2800 (H) x 1050 (D) mm Cgjdpfx Absyapyxscsn - Weight approx.: 4000 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, controller manufacturer: FANUC, controller model: SERIES 18i-MB, total height: 3,300 mm, total length: 2,700 mm, total width: 2,700 mm, table width: 470 mm, table length: 1,500 mm, spindle speed (min.): 36 rpm, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, tool length: 250 mm, tool diameter: 125 mm, input voltage: 400 V, Equipment: chip conveyor, STAMA MC 526 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 45 A - Table with three T-slots - Incl. 4th axis - Incl. 42-position tool changer - Overhang: 350 mm - Working spindle bearing diameter: 65 mm - Incl. chip conveyor and coolant system - Note: without the clamping devices shown in the photos Notice: The item must be collected bindingly between 04 and 12 March 2026 on a date to be agreed. Codsx E Tt Iepfx Abcsgn FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Year of construction: 1999, ja Hydraulische klemmung weight of the machine ca. 3,3 t t Cedpjw Syf Ajfx Abcjgn