Section rolling line / roll forming machine

Dallan T4R-10-300

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Very well-maintained lathe with powered tools and a sub-spindle. Year of manufacture: 2004 Mazatrol 640T NEXUS control 500 mm between centers Max. turning diameter: 380 mm 2x hydraulic Kitagawa chucks Measuring arm Powered tools with VDI40 adapter (VDI tools are available at an additional cost) C-axis Sub-spindle Everything has been cleaned and is ready for use! Machine weight: approximately 5 tons Forklift available for loading the machine! Machine price: €29,950 excluding VAT (no tooling included) Gjdpfx Aoyx U Itoa Esbw Machine + VDI40 toolholders (13 driven + 17 fixed): €36,500 excluding VAT This machine is available for inspection in Genk and can be powered on for demonstration!

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Gedpfsvwz T Uox Aa Ejbw

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position Gedpfodzp Tcsx Aa Ejbw - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Gsdpfx Aoktffzoa Esbw Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW, including loading on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Gbjdpfjtvfcmox Aa Eow

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, JORNS NORMA - LINE 125 SW | Swivel bending machine | 6.4 meters working length, 1.25 mm bending capacity. Gsdpfx Aeznc Ahoa Ejbw

Condition: like new (used), Year of construction: 2020, operating hours: 28 h, functionality: fully functional, total width: 1,970 mm, total height: 2,410 mm, total length: 2,035 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,600 kg, grinding height: 160 mm, grinding belt speed: 18,000 mm/s, type of input current: three-phase, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, workpiece width (max.): 1,300 mm, Equipment: type plate available, Machine like new, almost at no use. Please contact me for more details. Gjdpjyl Svtefx Aa Esbw

Condition: reconditioned (used), Year of construction: 2005, -Primary impact crusher, complete static unit. -Primary impactor, Babbitles brand. Inlet opening: 2350 x 1500 mm. Motor: 500 hp. -New bearings, shaft, and supports. -New impact bars. Gedpfx Aaeimwybj Esbw -Articulated plate feeder, width 1400 mm, length 5000 mm. Feeder condition: good. -Disc pre-screener, width 2000 mm, diameter 1000 mm, with gearbox and electric motor. -Hopper with a capacity of 40 m3, bolted and can be disassembled in parts for transport. -The entire assembly is mounted on a bolted chassis. -The complete unit is transportable in a sea container.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: ML0271-000198, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, total height: 1,600 mm, total length: 2,325 mm, total width: 1,600 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, type of input current: three-phase, bar passage: 65 mm, Equipment: documentation/manual, We are offering for sale a DOOSAN LYNX 220LSYC CNC turning center with a tailstock, manufactured in 2015, in good condition. It operated for 2 years in medium-volume series production and has since been used for smaller series and custom parts. The machine is equipped with a chip conveyor, tool probe, chuck with collet chuck, and a 3-jaw hydraulic chuck. It also has powered tool holders (3 pcs). Other features include: workpiece ejector, workpiece catching and removal system, tool load monitoring, oil separator for extended coolant life, high-rigidity cast iron machine bed, and a turret with 12 tool positions (24 positions total). Weight: 2900 kg. The machine is sold with 12 tool holders. Net price. If you have any questions or need further information, please send us a message. Gjdpfxjy Uwgqj Aa Eebw The bar feeder shown in the pictures can be purchased separately (see our other listing).

Condition: new, Year of construction: 2025, Description: AORE PG3015 T6: (3 Kw) We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 3 overall dimensions 8635 x 3920 x 2350 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 3 Kw (1~20 Kw as option) - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 6 mm - copper 5 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 2100 mm - Y-axis travel 3000 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G tube Double pneumatic Chuck 10 ~ 225 mm cutting 10 till 225 mm sqaer and rond tube lenght 6 meter special software for tube cutting max load 300 kg Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera 1 on pallet arear and 1 on cutting inside assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Gbsdpfx Aoix Nb Nja Esw - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland