Universal machining center

DECKEL MAHO DMU 70 VL

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° Fsdpeym Sd Tsfx Agfopf - Input and display increment: 0.001° - Weight: approx. 310 kg - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : Fsdpfovf Nw Djx Agfjpf X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Fsdjyk S Hpopfx Agfjpf Manufacturer: DECKEL MAHO Model: DMU 70VL Year of manufacture: 2001

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor Fodpfxsu Hf Ryo Agfepf measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW Fsdpfx Asu R Urhegfspf - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Milling Spindle: Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Fjdpjyh Nm Ssfx Agfepf Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Equipment & Features: High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: good (used), Distance between centers: 1000 mm Height of centers: 175 mm Grinding length: 500 mm Fpjdett Rawjpfx Agfsf Maximum grinding diameter: 300 mm Working wheel dimensions (OD x ID x W): 500 x 203 x 80/100 mm Internal Morse taper: 5 Working wheel motor power: 7.5 kW Total power: 17 kW Longitudinal travel of the carriage (X-axis): 267 mm Transverse travel of the carriage (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Rotating range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approximate weight: 4200 kg

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) Fodpfx Agjud N Hdjfopf CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic head +180/-7° stepless HSK A63 Fpodpfjw Ngipjx Agfef Number of pallets: 2 pcs Pallet size: 1000*800 mm

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Fodpfx Agoxwytcefepf Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.