Tool Room Milling Machine - Universal

DECKEL FP 1

Condition: good (used), Year of construction: 1995, 1 used universal tool and cutter grinding machine Giedpfx Afezamw Isveu Manufacturer: Deckel Maho Type: FP 1 Year of manufacture: 1995, with CE certification Equipped with Heidenhain TNC 123 digital display Technical data: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle mounting: SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight: approx. 1 t Space required: approx. 1.6x1.3x1.8 m

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Gedpoyll A Tefx Afvsiu Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m Gedpfx Aorn I Rzsfvsiu

Condition: new, centre height // mm total power requirement / kW Giedpfx Afozcgfqsvou weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Year of construction: 1978, condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display from training department , rigid table , SK 40 spindle mounting. Accessories : div. collets and cutter arbors. Very good working condition , can be demonstrated under power by arrangement. Gijdpfjhtfubox Afvju

Condition: good (used), functionality: fully functional, Internal article number: 26007 Gedezb Ni Aopfx Afvsiu Universal milling machine Deckel FP1 Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Connection power: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed rate: Continuously variable, 5-500 mm/min Rapid traverse function: Not operational! The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our more than 500 m² heated storage area.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition, CE compliant. Technical data: >> Year of manufacture 1990, machine no. 2102-5046 >> Fixed angular table >> Speed: 40 - 2000 RPM >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical quill and horizontal quill - SK40 Gedpfozbb E Aox Afvjiu >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list About the machine: Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain control system, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes the work easier and even more precise. Take the opportunity to inspect and test this machine on site under power.

Condition: good (used), Year of construction: 1973, Centre height: 150 mm Centre distance: 760 mm Max. turning diameter over bed/cross slide: 300/165 mm Spindle bore: 32 mm Spindle mount, short taper per DIN 55027: Size 5 Quill taper of tailstock: MT 3 Gedpfoyu R Nkjx Afvoiu 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 inch threads: 75 - 2.5 TPI 19 module threads: 0.1 - 1.75 module 19 diametral pitch threads: 70 - 4 DP Electric drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Required space: 1800 x 770 x 1300 mm

Condition: good (used), Year of construction: 1980, machine/vehicle number: 4038, travel distance X-axis: 290 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 330 mm, mount diameter: 40 mm, table length: 600 mm, table width: 210 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 700 kg, CONDITION & NOTES: - This is an active, path-controlled tool milling machine Gjdpfx Aowxpxmsfveiu

Condition: used, machine/vehicle number: 28670, x-travel:ca. 400 mm y-travel:150 mm z-travel:340 mm surface area:600 x 210 mm T-slots:4 T - slots - width:12 mm spindle speeds::20 - 2000 U/min turning speed range - vertical:60 - 1200 U/min turning speed range - horizontal:95 - 1900 U/min speed steps work spindle:12 feed range:10 - 500 mm/min feed steps:10 Giedpfecxxlisx Afvsu spindle taper:MK 4 quill stroke vertical:60 mm total power requirement:1,7 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,9 x 1,05 x 1,55 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, Gjdpfx Ajwwwr Eofvjiu DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, machine/vehicle number: 52326/08, x-travel:250 mm y-travel:150 mm z-travel:305 mm table surface area:600 x 210 mm spindle speeds:40 - 2000 U/min spindle turning speed range:16 spindle taper:SK 40 feed:10 - 500 mm/min feed steps:16 vertical head swivelling:+/- 90 Grad total power requirement:1,0 / 1,4 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:1,0 x 1,25 x 0,85 m This Deckel FP1 Universal Milling Machine - The Vertical Spindle Swivelable left or right (90*) - With 600 mm Broad Table ( Tilt and Turn ) - Two-step dials for speed and feed control for Quick Change. - Quick Lever for Rapid feed traverse - Vertical quill - 60mm, NK-40 / SK-40 - Seperate power cabin Giedpfocxxrvsx Afvsu

Condition: used, Year of construction: 1987, Deckel FP1 with active 3-axis Heidenhain digital display, 3-axis active, fixed table, SK40 S20x2 spindle mount. Central lubrication, operating manuals. Good, ready-to-use condition. Can be demonstrated under power by arrangement. Gsdpfx Aozbykwofvsiu

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Gjdpey Tlwuofx Afveiu Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: good (used), Internal article no.: 26031 Universal milling machine Deckel FP1 Infinitely variable feed Gjdsyqx S Eopfx Afveiu + Various SK40 tool holders + Collet set (S20x2) + Hydraulic machine vice Röhm 110 The servomotor has been overhauled! Travel: X300 / Y160 / Z340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min The machine is fully functional and can be inspected under power, by appointment, in a heated storage area of over 500 m².