Universal - milling table

DECKEL

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) Ledpfxozcqlue Apdoag • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,195 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,080 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: Millplus IT, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details. • Axes: 5-axis (X, Y, Z + A, B) • Condition note: Spindle collided with workpiece and is currently seized. Advised that it can be rebuilt/reinstalled by a specialized service company; estimated parts cost approx. €7,000. Additional equipment Lodpfxjzlgxuj Apdjag • Automation: Erowa Robot Easy system with 12 pallet stations • Workholding: Erowa zero-point clamping system (extensive set) • Rotary/tilting table: Nikken CNC rotary tilting table (fully refurbished in 2016) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2006, functionality: fully functional, Operating hours: 113520 h Total spindle hours: 58190 h (date: 3rd September 2026) In April 2026, a new milling spindle from DMG-MORI was installed. Since then only 25 running hours ! A recent accuracy test report is available. * 4-axes controlled Laedpfx Apozvm Abedsg * CNC control HEIDENHAIN iTNC 530 * Autom. swivel-type milling head (B-axis) +/- 105 deg. * 120-station ATC * Chip conveyor * Tool measuring device (laser) * Electronic handwheel * Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools. Technical details x-travel 2500 mm y-travel 920 mm z-travel 820 mm Control Heidenhain iTNC 530 table surface area 3100 x 900 mm table load 3,0 t tool taper HSK-A63 spindle turning speed range 20 - 18000 rpm rapid traverse (X,Y,Z) 100 / 60 / 60 m/min main drive (S1/S6) 35 / 25 kW total power requirement 92 kVA weight of the machine ca. 25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 1,100 Nm, controller manufacturer: HEIDENHAIN, controller model: MILLPLUS, workpiece weight (max.): 330 kg, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, DECKEL MAHO DMU 50 EVOLUTION Universal Machining Center - Operating hours: see photos - Tool holder: SK 40 - Resolution of the measuring system X/Y/Z: 0.001 mm - Positioning tolerance: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool changer: 6 kg - Max. total tool weight in the magazine: 90 kg - NC rotary table with swivel axis, clamping surface: 500 x 380 mm Laedszlgnvopfx Apdsg - Distance of T-slots/size: 63/4 H 7 mm - Centering bore diameter: 30 H 6 mm - Max. revolutions of the table top (rotary axis): 33 rpm - Max. swiveling torque: 1400 Nm - Swiveling speed: 26 rpm Attention: The item must be picked up between October 7th and October 14th, 2026, on a date to be agreed upon. FCA D-35576 Wetzlar - loaded onto a truck.

Condition: good (used), Year of construction: 2001, DMG / MAHO DMC 80 U – CNC Universal Machining Center Manufacturer: MAHO / DMG Model: DMC 80 U Machine Type: CNC Universal Machining Center Year of Construction: 2001 Machine/Factory Number: 71.408.395 Control System: MillPlus IT Operating Hours: approx. 90,896 h Spindle Operating Time: approx. 44,717 h Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Draw-in Force Target: 22 kN Measured Tool Draw-in Force: 17 kN Spindle/Geometric Runout at L = 0 mm: 0.005 mm Spindle/Geometric Runout at L = 200 mm: 0.005 mm Tool Management Tool Magazine: 120 tool positions Automatic Tool Changer Tool gripper disassembled and cleaned as part of the last documented maintenance Pallet Automation 6 pallet positions Automated pallet handling system available Rotary/NC table available B and C axes available, according to the electrical maintenance report Axes / Drives Documented in the maintenance report of 2026 NC rotary table and axes Pallet changer / pallet handling Tool magazine / tool changing system Coolant and filter system Coolant system Chip conveyor Interlit compact filter Spindle oil cooler Smoke/mist extraction Ringler extractor During the documented maintenance, the following were carried out, among others: Coolant tank steamed and cleaned Chip conveyor cleaned Extraction system cleaned Tool gripper disassembled and cleaned Pressure accumulator checked and refilled with nitrogen to 80 bar Extractor cleaned Machine geometry checked Hydraulics / Lubrication Spindle cooling unit Hydraulic unit NC rotary table Oil changed during maintenance Central lubrication Performed by DECKEL MAHO Pfronten. The following were checked or serviced, among others: Electrical cables Control cabinet Hydraulic lines and hoses Compressed air system Check valves Axes Lighting Filters Machine function Emergency stop system Door locks Two-hand operation Machine geometry Electrical safety Check valves were renewed according to the maintenance report Electrical check very good according to DIN EN 60204 Insulation measurements – excerpt All documented measurement points were evaluated as OK. Main spindle motor: 192 MΩ X-axis: 255 MΩ Y-axis: 103 MΩ Z-axis: 427 MΩ B-axis: 279 MΩ C-axis: 108 MΩ Tool magazine: 267 MΩ Pallet changer drive: 113 MΩ Pallet changer linear drive: 90 MΩ Vertical stroke pallet changer: 1.12 GΩ Smoke extraction: 97 MΩ Chip conveyor: 1.42 GΩ Tool gripper: 1.66 GΩ Hydraulics: 2.21 GΩ Machine lamp: 447 MΩ Lubrication: 3.26 GΩ Protective conductor test Specification: < 0.3 Ω Measured values: Protective door machine: 0.16 Ω Protective door pallet changer: 0.26 Ω Control panel tool changer: 0.13 Ω Coolant system: 0.11 Ω Spindle cooler: 0.21 Ω Control panel work area: 0.03 Ω Spindle: 0.22 Ω Ringler extractor: 0.21 Ω All documented measurement points are within the specified target range. Equipment CNC control system MillPlus IT Universal machining B-axis C-axis / NC rotary table 12,000 rpm spindle 120-position tool magazine 6-position pallet system Automatic tool changer Lsdpfxoz D Stfs Apdsag Automatic pallet handling Coolant system Interlit compact filter system Chip conveyor Spindle oil cooler Smoke/mist extraction Ringler extractor Hydraulic unit Central lubrication Comprehensive safety equipment Geometry test, runout value of 0.005 mm at a measuring length of 200 mm Tool draw-in force 17 kN, target value 22 kN

Condition: used, Counter bearing Ljdpfx Apjctd Rhodjag Manufacturer: Deckel Inner rail: 92 mm Outer rail: 130 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details Ledjz D Aquopfx Apdeag x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, CNC Universal – Milling and Drilling Machine DECKEL MAHO DMU 80 T With Heidenhain iTNC 530 path control Year of manufacture: 2002 Travel ranges: X 880 Y 630 Z 630 Spindle speed range: 0 – 18,000 rpm, stepless (SK 40) With the following accessories: NC rotary table, 700 mm, integrated into a fixed angular table, 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine slots (SK 40) Full enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 + 4 Spiralscrew conveyor Coolant system 3-piece adjustable machine feet Spindle oil cooler Control cabinet cooler (Rittal) Operating manuals Lasdpoz Dwd Aefx Apdsg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,305 h, travel distance X-axis: 635 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2005. It features a HEIDENHAIN iTNC 530 control unit and a 20-position tool changer, providing efficient machining capabilities. With a machine hour count of 39,396 hours, this vertical machining centre represents an opportunity for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. Lajdpfx Apjz Du S Rjdog - Handwheel: Separate handwheel control- Machine Hours: 39,396 h - Programme Run Time: 13,305 h - Apparent Power: 20 kVA- Nominal Current: 28 A Jn max / 35 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50 Hz- Known Defect: Fault with the clamping spring in the spindle- Not included: Chip Conveyor

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 Laodpfx Ajz Dp Dbspdsg With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900