Demag systec 160/520-430 (2010)

Demag systec 160/520-430

Condition: excellent (used), Year of construction: 2003, Demag Nkjdpfxshrw Ame Adwet Ergotech - system 250/280-80 Closing 25 TO Scrow 25mm Year of manufacture 2003 Sprue picker 2x PIECES

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Nkjdporgw Exjfx Adwot Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: used, Year of construction: 2001, Clamping force: 250 t Nsdpfx Adsvbbvkjwjkt Screw diameter: 70 mm Distance between tie bars V: 630 mm Distance between tie bars H: 630 mm Core pullers: 2x Air valve: 1x Type: Horizontal Drive: Hydraulic

Year of construction: 2007, condition: ready for operation (used), Various old injection molding machines are available. 1) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100000h. 4) Demag ET 150/500-610h/120v multi, force: 150t, screw diameter: 50mm/25mm, year of construction: 2006, operating hours: approx. 105000h. 5) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 6) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 7) Engel VC 740/150 electric, power: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 8) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 67000h. 9) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of construction: 2007, operating hours: approx. 98000h. 10) Engel VC 740/150 electric, force: 150t, screw diameter: 50mm, year of construction: 2006, operating hours: approx. 103000h. 11) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2000. 12) Demag ET 200-560-840 concept, power: 200t, screw diameter: 60mm, year of construction: 2001. 13) Engel VC 940/200 electric, force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107000h. Documentation available. On-site inspection is possible. Individual sale possible. Nsdpfev R Ew Dsx Adwekt

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Nsdpfx Asw Hq Hhedwskt Dimensions & Weight Overall length: 6,500 mm Overall width: 1,900 mm Overall height: 2,300 mm Machine weight (net): 13,100 kg

Condition: used, Year of construction: 2009, Injection moulding machine Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009 (without the handling unit / temperature control devices / material supply [hopper, feeding device] shown). Demag 210: Screw diameter Ø 50 mm - Sumitomo Demag IntElect 210/580-1000, year 2009: 6260 x 1555 x 2219 mm (LxWxH), net weight 11,000 kg Description SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Nkedpfxjw E N S Ho Adwet

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Nkjdpfx Aox Uqb Isdwjt Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: ready for operation (used), Year of construction: 2012, clamping force: 2,500 kN, screw diameter: 50 mm, injection weight: 482 g, total height: 2,400 mm, overall weight: 14,900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. • Clamping unit size: 250 • Holding force: 2750 kN • Platen size (H x V): 930 x 930 mm • Distance between tie bars (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) Nedpfx Ajx D Nwqjdwekt • Screw geometry: Standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm3/s • Metering stroke: 270 mm • Nozzle stroke (max): 110 mm • Material hopper capacity: 110 L • Electric metering drive: 13.1 kW • Cylinder heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Max drive overhang with nozzle contact: 184 mm • Max drive overhang with nozzle retraction: 1279 mm • The maximum injection weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine Depth 6600 mm

Condition: used, Year of construction: 2007, clamping force: 420 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,000 kg, load hours: 53,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request Njdpfx Ajxr N Urodwokt terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2005, Demag Multi 80/420-80h/120v Injection Moulding Machine Year of manufacture: 2005 TWO MACHINES AVAILABLE Machine type: Two-component (2K) injection moulding machine Control system: NC4 Control Drive type: Hydraulic Technical Data – Clamping Unit Clamping force: 800 kN Tie-bar spacing: 420 × 420 mm Mounting platen dimensions: 590 × 600 mm Nodpfxoww H S Ie Adwjkt Minimum mould height: 250 mm Maximum mould opening stroke: 500 mm Maximum daylight between platens: 750 mm Injection Unit – Two-component First system (horizontal): Nitrided screw Screw diameter: 22 mm Second system (vertical): Bimetallic screw Screw diameter: 25 mm General Data Motor power: 18.5 kW Heater power: 8.8 kW Dimensions (L × W × H): 3.9 × 1.4 × 1.9 m Total weight: 4100 kg Equipment and Additional Information Control language: German Complete machine history – available