Universal Machining Centre

DMG DECKEL MAHO DMU 50 eco

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Additional equipment • Type: Side-Mount (SMTC)/ Capacity: 30+1/ Max Tool Diameter (full): 64 mm/ Max Tool Diameter (adjacent empty): 127 mm/ Max Tool Length: 279 mm /Max Tool Weight: 5.0 kg • Tool-to-Tool (avg): 1.80 s/ Chip-to-Chip (avg): 2.40 s Ffedpfx Adeyaix Usaow • Included: HRT210 Machine Benefits Technical Machine Benefits • Torque: 122 nm at 2000 rpm • Drive system: inline direct-drive • Taper: bt40 / ct40 / hsk-a63 • Lubrication: air/oil injection/cooling: liquid-cooled • Max cutting feedrate: 21. 2 m/min / rapids on x, y, z-axis: 35. 6 m/min • Coolant tank capacity: 208 l / through-spindle coolant pressure: 21 bar / through-tool air blast: yes / chip auger: yes / chip tray filter kit: yes / window air blast: yes / coolant pump: multi-stage • Air consumption: 113 l/min at 6. 9 bar / minimum air pressure: 5. 5 bar / air hose connection: 3/8 in • Standard interface: ethernet and wifi / control memory: 1 gb / remote monitoring: haasconnect / high-speed machining: included / advanced tool management: included /media display (m130): included / power failure detection: included /safe run function: included / rigid tapping: included

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Fodpfoh A Sfdox Adaefw Technical data was taken from publicly available sources

Condition: excellent (used), Year of construction: 2011, operating hours: 59,234 h, functionality: fully functional, This machine is for sale by a European corporation and is in exceptionally well-maintained condition. Further photographs and video recordings are available at any time upon request. Technical Data – DMC 210 FD Machine type: 5-Axis Machining Centre Model series: DMC 210 FD Machine category: Fjdpfxjx Sylke Adasfw Metal-Cutting Manufacturing Equipment 3-Axis Milling Machine CNC-controlled Year of manufacture: 2011 Condition: Very good Operating hours: approx. 59,000 h Weight: 50,000 kg Control / CNC: CNC control, Siemens 840D Solutionline Number of axes: 5-axis machining center Control type: Fully automatic (Code 017) Spindle / Tooling Tool holder: HSK 100, DIN 69871 HSK100 Spindle type: HSK100 Maximum spindle speed: 6,300 rpm Maximum feed rate: 60 m/min Maximum tool weight: 35 kg Maximum tool length: 450 mm Maximum tool diameter: 250 mm Tool magazine / Measurement technology: Tool magazine: 280 positions Measuring probe: Renishaw MP10 Travels: X-axis travel: 1,800 mm Y-axis travel: 2,100 mm Z-axis travel: 1,250 mm Table / Workpiece Table length: 1,850 mm Table width: 1,850 mm Maximum workpiece length: 1,500 mm Maximum workpiece weight: 5,000 kg Power supply / Connection data: Mains connection: 400 V, 3/N, PE, 50 Hz Power consumption: 167 kVA Maximum current: 241 A Maximum circuit breaker: 250 A DC control voltage: 24 V DC AC supply voltage: 230 V AC Total installed power: 163 kW Equipment: Operator platform: Available Coolant system: Available Chip extractor: Available Operating manual / Documentation: Available

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Spindle speed range: 0 – 8,000 rpm, stepless (SK 50) Including the following accessories: - NC rotary table, 900 mm x 700 mm clamping surface (maximum table load 1.4 t) - Universal milling head with controlled B-axis - Universal tool changer with 40 magazine stations, double gripper (SK 50) - Fully enclosed guard cabin with sliding doors and interior lighting - ICS – 40 bar (internal coolant supply) - Chip conveyor - Rotoclear - 3D tactile probe Heidenhain TS 641 - Operating modes 3 + 4 - Electronic handwheel - 50 pcs. tool holders SK 50 - 3 height-adjustable machine feet - Transport device Ffsdpexn Aczsfx Adajw - Operating manuals

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm table surface area: D 700 x 500 mm turning speeds: 42.000 1/min Ffedpfxewzx Nmo Adasw tool taper: HSK E50 control: HEIDENHAIN iTNC 530 tool change unit: 60 pos. rapid traverse: 50 m/min table load capacity - central/maximum: 350 kg total power requirement: 50 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, el. handwheel, laser, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, oilmist suction, spindle chiller, no internal coolant supply, approx. 141.300 hours "machine on", approx. 64.500 hours "spindle on" in total machine in good condition (test report available) *

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 12.000 [rpm] - Spindle power : 7,6 [kVA] LINEAR AXES Fodpfxouhbt Re Adasfw - Travels on X/Y/Z axes : 500 / 410 / 610 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 26 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.640 x 2.100 [mm] - Machine height : 2.274 [mm] - Machine weight : 2.250 [kg] MACHINE HOURS - Number of working hours : 9070 [h] EQUIPMENT - CNC : BROTHER A00 - Electronic handwheel - Interface : RS232 - Workpiece probe : Renishaw OMP 60 - 4th axis : LEHMANN sans variateur - Chips conveyor - Coolant tank - Coolant through spindle : 70 [bars] - Oil mist extractor : AAF Astrosta - Electric transformer - Tool-holders : 42

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Fjdekvpnmspfx Adaefw Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 max spindle speed 15000rpm BT30 high cooling through the spindle automatic tool changer 20 tools weight machine 4500kg with machine chip conveyor with pomps low hours machine

Condition: used, Year of construction: 2006, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.200 mm C-axis 360 x 0,001 ° A - axis ° Control SINUMERIK 840D Powerline SIEMENS Size of table plate 900 x 700 mm milling spindle - taper HSK - A100 spindle turning speed - stepless 12000 U/min toolpiece magazine: chain magazine 180 Stück total power requirement 85 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 6,5 x 6,1 x 3,5 m 5-axis machining center with horizontal milling spindle arrangement SIEMENS SINUMERIK 840D Powerline control system Electronic handwheel NC swivel rotary table Rotoclear window Measuring probe ready Blum laser tool measurement Vibration sensor Fsdpjw E Nnnefx Adaofw Tool taper cleaning 4th operating mode Internal coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling/heating unit

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,853 h, functionality: fully functional, machine/vehicle number: 11170000963, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis simultaneous Speed 18000 Tool changer 60 pieces / SK 40 DIN69871 Tools included in the price Fsdowqp Huopfx Adaofw ICS / air blast Heidenhain 426/430

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. Ffsdex Rd Hpopfx Adasw • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40