Low loader semitrailer

Doll S3H Lenk & Tele 6.5

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin Podpfx Abjrgzv Nepora * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Planing machine available in 2-sided or 4-sided design REX HOMS Working width max. 2050 mm Working height max. 310 mm including swivel ring The 8 images show a REX HOMS 2050 in water blue color Pjdsyid Uyopfx Abpsra which was overhauled and delivered by jöma several years ago and serves as an example.

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 Predpfsyy Nnqsx Abpsa - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), mileage: 450 km, power: 75 kW (101.97 HP), fuel type: electric, color: silver, gearing type: automatic, number of seats: 8, Year of construction: 2023, Number of doors: 6 Emission class: Euro 0 Technical condition: very good Optical condition: very good Damage: none Podpfsyw Nfkjx Abpora Warranty: None

Condition: excellent (used), mileage: 1,17,563 km, fuel type: diesel, color: red, lifting height: 36,500 mm, first registration: 05/2015, mast type: telescopic, Year of construction: 2015, = Additional Options and Accessories = - PTO = Further Information = Technical Information Pjdpsuxu Dyefx Abpora Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel drive Dimensions (L x W): 1103 x 255 cm Functional Mast length: 35.2 m Lifting capacity: 40,000 kg Superstructure brand: TADANO ATF 40G-2 CE marking: yes Condition Technical condition: very good Optical condition: very good TADANO ATF 40G-2 CRANE UNDERCARRIAGE: 279 hp 4X4 DRIVE 117,563 km AUTOMATIC TRANSMISSION AIR CONDITIONER / REFRIGERATOR TIRE SIZE 445/95/R25 MERCEDES-BENZ OM 906 LA ENGINE UPPERCARRIAGE HEATING 3 SHAVED WOOD BLOCKS 20T 1 SHAVED WOOD BLOCK 10 T MIN / MAX BOOM LENGTH 10.5 M / 35.2 M MAXIMUM LIFTING CAPACITY: 40,000 KG MAXIMUM HOOK HEIGHT 36.5 M FULL COUNTERWEIGHT ALL DOCUMENTS AND PAPERS AVAILABLE CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: used, mileage: 7,28,985 km, power: 199 kW (270.56 HP), first registration: 05/2005, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,500 mm, color: white, gearing type: mechanical, number of gears: 8, emission class: euro3, suspension: air, Year of construction: 2005, Equipment: electric window regulation, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 6.174 cc Drivetrain Drive: Wheel Engine type: Renault 6verticaux en ligne Axle configuration Tyre size: 315/70R22,5 Suspension: air suspension Rear axle: Double wheels Weights Empty weight: 7.220 kg Carrying capacity: 11.780 kg GVW: 19.000 kg = Additional options and accessories = Predpfx Abeuc E Diopsa - Roof spoiler

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Caterpillar C4.4, General information Field of application: Construction Weights Empty weight: 1.213 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 276 x 103 x 158 cm CE mark: yes Other information Fuel consumption: 18.4 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Prjdpjv Sxzrsfx Abpea Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 166 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, mileage: 9,13,485 km, power: 397 kW (539.77 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 14,600 kg, maximum load weight: 11,400 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,200 mm, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, crane, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Lg. House, 1x comfort seat, 1x couch, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, auxiliary heating, air horn, switch 16, ABS (anti-lock braking system), traction control (ASR), Intarder, power take-off, differential lock, fog lights, driving lights, working lights, air/leaf suspension, low-noise G1, roof hatch, crane behind house, emergency stop, grab control, high seat, 2-point hydraulic stabilizer, 1x hydr. extension, green environmental sticker Wheelbase: 4200 mm Body: Log transporter with Epsilon S260L82 crane & high seat (built 2010) Gearbox ZF 16 S 252 OD with ZF Intarder, MAN BrakeMatic, L-cab, air conditioning, additional heating. Load diagram: 5m-4720kg, 7m-3370kg, 8m-2940kg! Matching trailer -87584- available for a surcharge of 13.900,00€ net! Grapple available for an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Prsdpfxovhm Ras Abpsa - .

Condition: used, Year of construction: 2002, functionality: fully functional, We are offering this operational Hundegger K2-5 62.5 mm cutting machine, manufactured in 2002, for sale. The machine was reassembled at the new location by Hundegger in 2021. The safety features have been updated to the latest standards (€17,000) and the machine has been serviced. From 2021 to early 2022, the machine was completely rebuilt by Hundegger and approved for operation. The company declared insolvency in 2025 and the property was sold. Consequently, the K2, including the HEA 200 support beam and chip extraction system (pusher system), was completely dismantled in operational condition and removed from the site by Hundegger. Invoices for the K2 (2002), safety features, saw blade, milling heads, support blocks (2025), etc., can be provided upon request. The K2 was fully functional, preserved, and dismantled at the Hundegger site and is now in storage. Psdozrazcopfx Abpora Transport requires 2 semi-trailer trucks, approximately 28.5 tons. Loading can be arranged for approximately €4,000. Manufacturer: Hundegger Model: K2-5 625 Year of Manufacture: 2002 Condition: Operational Category ID: 156 Type ID: 2209 Machine Type: Cutting Machine - Undercarriage pivoting miter saw - Universal milling unit, 5-axis (UF5) - Roller cutter - Finger cutter - Dovetail cutter - Combination support for vertically operating tools - 1x Vertical finger milling machine, 5.5 kW - 2x Drilling unit, 2.2 kW Drilling unit, swiveling 30° (3.0 kW) - drilling direction horizontal - Combination support for horizontally operating tools - 1x Drilling unit, 2.2 kW - drilling direction horizontal - 1x Drilling unit, swiveling 30° (3.0 kW) - 1x Grooving unit, 7.5 kW Space available for an additional main unit. Control system: KI 2 – KI 3 Additionally, a cabinet with consumables such as lubricants, grease, and rollers is included. A new roller cutter, dovetail cutter, grooving chain, and replacement cutting inserts for the tools are available, as documented by an invoice for €3,800. All necessary documentation from Hundegger for the installation and operation of the machine is available.

Condition: new, Year of construction: 2023, Storage number: 100518723 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Hook height 21m Outreach 33m Prjdezkztqepfx Abpsa Color: yellow and gray in the new Liebherr design Includes counterweight: 9 plates, each weighing 1530kg Includes slew and trolley travel limiters Includes rear axle adapter Includes transformer, 1.5 kVA Extension cable Location: Passau