Profiling line with flying shear
Dreistern P3.100

Name: Dreistern P3.100
Brand: Dreistern
Availability: InStock

Condition

Used

Location

Saffig

Profiling line with flying shear Dreistern P3.100

Machine data

Machine type:: Profiling line with flying shear

Manufacturer:: Dreistern

Model:: P3.100

Condition:: used

Price & Location

Location:: Drieschweidenweg 10, 56648 Saffig, Deutschland

Call

Technical details

Sheet thickness steel (max.):: 2 mm

Total width:: 250 mm

Details about the offer

Listing ID:: A21932813

Update:: 18.05.2026

Description

Profiling line Dreistern P3.100 with mobile cut-off unit and accessories

Machine bed features:
Production direction: right to left
Axle distance: 330 mm
48 stations
44 stations can be driven (44 gearboxes)
Quick-change plates
Mechanical quick-release clamps
Coolant piping
1 x 42 kW Baumüller motor
1 x 15 kW Baumüller motor

Profiling frame features:
Tool width per frame: 275 mm
Working shaft diameter: 50 mm
Working shaft connection: 30 mm with keyway
Fixed lower shaft (6 pieces with adjustable lower shaft)
Axial adjustment
Adjustment range of lower/upper shaft: 80 - 170 mm

Gearbox features:
Worm gear ratio 1:21
Lower/upper shaft gear ratio 1:1

Nedpfx Aqey Sm Eqsvswg
Mobile cut-off unit features:
Travel distance: 1900 mm
Profile rail guidance
Ball screw drive
Bosch servo motor
Valve block with punching unit
Folding table length: 3000 mm
Emergency stop

Scope of delivery:
Machine bed with gearbox support
Infeed table
Measuring wheel unit, pneumatic
Straightening device
Strip filter unit 800 liters
Hydraulic unit for separator
44 gearboxes
44 profiling frames
2 Baumüller DC motors
66 universal joints

The system operated flawlessly in production until it was dismantled at the customer's facility.
Control system not included.

Strip unwinder and perforation unit are also available from us as used machines.
The system can also be easily extended with additional stations.

We can support you with the following when reassembling the system:
Planning
Mechanical overhaul
Control system construction
Painting
Safety concept
CE documentation

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2026

20 listings online

Call

Send inquiry

Telephone & Fax

+49 2625 ... show

These listings may also fit your interest.

Listing

Profiling scaffold, scaffold stand Dreistern P3.100

Saffig

6,971 km

Profiling scaffold, scaffold stand
DreisternP3.100

Call

Condition: used, Original profiling frames with quick-change plates for Dreistern P3.100 profiling machines Profiling frame features: Nwedpfx Asy Szgisqvog Tool width of frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Axial adjustment Adjustment range, top/bottom roller: 80 - 170 mm The following quantities are available: 44 pieces, fixed bottom shaft 4 pieces, adjustable bottom shaft Always mounted on 2 or 4 plates.

See details

Listing

Swiss-type cnc lathe STAR Micronics SR-32J

Contamine-sur-Arve

7,060 km

Swiss-type cnc lathe
STAR MicronicsSR-32J

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] MACHINE HOURS - Number of working hours : 18436 [h] - Number of spindle hours : 14949 [h] EQUIPMENT - CNC : Fanuc 32i-B - 3 colors status lamp - Rotating guide bush - Coolant tank - Bar loader : FMB TURBO 3- 36 - Ejection of workpiece - Parts catcher - Parts conveying strip - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer Njdpfx Aqsyxr Uqjvewg

See details

Listing

Saffig

6,971 km

Roll forming line
DreisternP3.100

Call

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Nodpfx Aqsy Sm A Asvewg Mechanical overhaul Control system construction Painting Safety concept CE documentation

See details

Listing

Saffig

6,971 km

Roll forming line
DreisternP3.100

Call

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Scope of Delivery: Machine bed with gearbox support Nodpfoy Sm Apjx Aqvjwg Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors 32 cardan shafts The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

See details

Listing

CNC turning and milling center Mazak Integrex 300 3 ST

Haifa

4,543 km

CNC turning and milling center
MazakIntegrex 300 3 ST

€25,000

~~€35,000~~

EXW Fixed price VAT not applicable

Call

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Nwsdpfx Aex Rkvqsqvjg Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

See details

Listing

Milling Machine - Vertical DECKEL MAHO DMU 50

Germany

6,829 km

Milling Machine - Vertical
DECKEL MAHODMU 50

Call

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical Nwedpfx Aqoy E Tv Aovog DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

See details

Listing

Multiple wire drawing machine - dry VEB 8 Block

Norderstedt

6,806 km

Multiple wire drawing machine - dry
VEB8 Block

Call

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Nsdjwi Tidepfx Aqvowg Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

See details

Listing

Deephole boring machine Heidenreich & Harbeck B3 SB Deep Hole Borer

United Kingdom

7,545 km

Deephole boring machine
Heidenreich & HarbeckB3 SB Deep Hole Borer

Call

Listing

Rovereto

6,700 km

Cold Rolling Mill
FROEHLING300

€72,000

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head Froehling Froehling is a renowned brand recognized for reliability and robustness in the field of rolling mills. 4Hi rolling mill head with bending and coilers. Specifications: Manufacturer: FROEHLING (Germany) – Refurbished 2004 Processable material: Aluminum alloys – brass – copper – low carbon steel Strip width: 282mm (300mm) Nedpsg Ryqksfx Aqvewg Strip thickness: 0.15 - 2mm Coil size: ID 400mm – OD 1500mm Max. rolling speed: 400m/min Work rolls: Diameter 130mm – Table 340mm Back-up rolls: Diameter 390mm – Table 335mm Complete with: Uncoiler and recoiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, dismantled and loaded on truck. Ready for inspection by any interested buyer. For any questions, do not hesitate to contact us. PLEASE SUBMIT YOUR OFFER IF INTERESTED, WE WILL SURELY REACH AN AGREEMENT TOGETHER.

See details

Listing

LINE (4-SIDES) of SIZING & EDGE BANDING HOMAG + BARGSYEDT KFL 525 + KFL 526 + TBH + TSP

Roreto di Cherasco

6,952 km

LINE (4-SIDES) of SIZING & EDGE BANDING
HOMAG + BARGSYEDTKFL 525 + KFL 526 + TBH + TSP

Call

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: Nwjdpfx Aqedt Rgvjvjg VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

See details

Advertise here