Yeast propagation plant

Esau & Hueber

Condition: used, Year of construction: 1999, Stainless steel storage tank, horizontal, equipped with cooling jackets. Additional title: coolable tank Volume: 229 hl Cooling jacket volume 4 x: 12 l Operating pressure: 3 bar Operating temperature: 20 °C Length: approx. 4,7 m Width: approx. 2,7 m Height: approx. 2,9 m Material: Stainless steel 1.4310 Lhjdpovcqmzjfx Aqveg Position: Horizontal Base construction: 6 x height-adjustable feet Features: Cooling jackets; manway; sapling valve; level sensor full; cleaning connection

Condition: good (used), Year of construction: 1994, Fillerblock, make Nagema, type: Varifill 40/10K/10PP, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, Siemens S5 control, built 1994 Ledpfsn D Hm Sox Aqvshg L: 4.000 mm, W: 2.700 mm, H: 2.800 mm

Condition: used, Year of construction: 2006, Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner. Additional title: semi-automatic Capacity: 240 cph Power: 0.3 kW Lhsdpfx Aovcqpioqveg Current: 1,85 A Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Operation / Control: SPS S7-200 Features: Single-point, semi-automatic canner Transport unit washer and turner

Condition: used, Filler for party cans and siphon bottles; with CO2 and compressed air supply. Length: 985 mm Width: 590 mm Height: 1435 mm Lodpfxsw Td E Ae Aqvshg

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Lhjdsqabiaepfx Aqvsg Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel Lsdpfx Aqelxzl Eovshg - 1 double shaft mixers - container for liquid extracts, etc.

Condition: ready for operation (used), Printing units: 2+1 flexo printing units, max. output with dextrin: 900 envelopes/min, paper weight: 70g/m²-120g/m². Formats: Book format min./max: 83x120mm/185x330mm, Diagonal format min./max: 83x120mm/185x265mm. On-site inspection is possible. Ljdpfx Aqetq Ha Tevjhg

Condition: ready for operation (used), Format: 0.5-1l, max. output: 5000 cartons/h, with cap applicator and EURO-LINE cartoning machine, an on-site inspection is possible. Ljdpfx Aqerviq Hsvohg

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Ledjttbd Njpfx Aqvjhg

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm Lodpfxslf Iqno Aqvshg