Wire eroding machine

FANUC C600 iB

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Fgsdpfozlc Tbjx Aptjg

Condition: used, Year of construction: 2018, Technical details: Fsdpfoy I Ak Iex Aptsgg x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 600x400x310 [mm] - Travels on U/V axes : [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 1050x820x300 [mm] - Max. part weight : 1000 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2650x3050 [mm] - Machine height : 2070 [mm] - Machine weight : 3600 [kg] MACHINE HOURS - Spark erosion hours : 15000 [h] Fedpfx Apsyxhmvotjgg EQUIPMENT - CNC : Fanuc 31iw-model B - Cooling unit - Filtration unit

Year of construction: 2019, operating hours: 5,500 h, condition: excellent (used), functionality: fully functional, The equipment must be removed by May 26, 2023 – a bid obligates the bidder to dismantle and remove the equipment within the specified timeframe. TECHNICAL DETAILS: Maximum workpiece size: 1050 x 820 x 300 mm Maximum workpiece weight: 1,000 kg Travel distances: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Control system: Fanuc 31i –WB Footprint: 2,440 x 2,680 mm Machine hours: 5,500 operating hours Fgedpfx Ask H D Haspteg

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Fjdpfxsx H Rmuo Aptjgg Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock Fsdpfx Ajwrm Dtjptsgg >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 2004, fuel type: gas, weight max. in kg 2500 kg stroke 3050 mm fork length 1200 mm load centre 500 mm turning radius 2444 mm driving speed 22 km/h guage width vorne 1008 mm guage width hinten 932 mm Fgsdpfxsr Dg H Ee Aptog weight of the machine ca. 3,64 t dimensions of the machine ca. 3,8 x 1,25 x 2,25 m

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm Fedpfx Asgin Ndjptjgg - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: new, Horizontal bending machine Fastech FP 40 Description • Pressing force: 40t • Stroke: 285mm • Max. tool height: 250mm • Flat bar over the top edge: 200 x 24mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm Fodpfofg Eu Rex Aptogg • Table: 660 x 1250mm • Total power consumption: 4.0kW • Motor: 400 Volt 50Hz • Weight: 1100kg • Dimensions L-W-H: 1250 x 650 x 1250mm • Oil capacity: 40.0l Features: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made of hardened and ground forged steel • Digital display for stroke adjustment • 1 x tool set • Double foot switch

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Fgodpfxsxx A D Ts Apteg