Drilling machine

FLOTT SB M 2

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Kdsdpfx Anjwuqbbsiju Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings Kodpfx Ajxlqxfjniodu

Condition: good (used), Used column (pillar) drilling machine Good condition Continuous/standard drilling capacity 25/30 mm Morse taper MK3 Kdsdpfx Anjyuvkgeieu Drilling stroke 120 mm 2 speed ranges up to 1000/up to 2000 rpm The speed is steplessly adjustable via the selector switch (level 1 or 2) and a side lever

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm Ksdpfx Anohx E T Hsiedu -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Condition: good (used), Stock no.: 3017 Column Drilling Machine Brand: Gillardon Machine no.: 0150352 Model: GB20 Spindle mounting: MT 2 Kdsdpexdkndefx Aniou Table size: 430 x 380 mm Clamping surface: 355 x 305 mm Table adjustability: 600 mm Throat: 280 mm Stroke: 120 mm Speed range: 60 to 1,400 rpm, stepless Footprint: 360 x 570 mm Column diameter: 100 mm Connection: 0.5 and 1.0 kW Weight: t Dimensions: 430 x 800 x 1,800 mm

Condition: used, bore capacity in steel (diameter) 40 mm throat 380 mm bore stroke 160 mm 4 speeds 60 - 1250 U/min total power requirement 3,3 kW weight 900 kg Kdedpfx Anexddtyeiju Features: -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system

Condition: ready for operation (used), Year of construction: 1975, Column drill press Kedpfehtri Eox Aniodu Manufacturer: CORDIA, Type: S-18, Year of manufacture: approx. 1975 Drilling capacity in steel: max. 18 mm Spindle mount: MK2 Spindle speeds: 90 - 1450 rpm Spindle stroke: 120 mm Table: 350 mm x 400 mm clamping surface; 270 mm x 320 mm Space required: Width 420 mm, Depth 650 mm, Height: 2000 mm Weight: approx. 350 kg Machine is ready for use.

Condition: good (used), functionality: fully functional, Drilling capacity in ST 60: 50 mm 8 gear stages: 67 – 750 rpm Spindle motor: 2.5 / 3.3 kW 4 drilling feed rates: 0.1 / 0.2 / 0.3 / 0.40 mm/rev Overhang, approx.: 355 mm Table surface: 500 x 620 mm (measured without edge) Spindle stroke: 250 mm Ksdpez S U R Defx Aniedu Taper: MK 5

Condition: used, Year of construction: 1980, voltage 50 V frequency 50 Hz Kdjdox U A Sljpfx Anieu ampere 3,7 A 21882 speeds: 3 Dimensions (L/W/H) 800 x 800 x 2200 mm weight 380 kg