Milling machine

Fritz Heckert FW 400/E

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m Redpfxsg Ip Efs Ag Nep - Angular stops adjustable

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Rsdpst Ipi Iefx Ag Nop Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: excellent (used), Year of construction: 1986, Conventional lathe, make: VDF HEIDENREICH&HARBECK, model: 540 Hamburg, year 1986. In very good original condition with 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes including the compound slide. Equipped with coolant system, swarf back panel, and machine documentation. 315 mm Forkardt chuck. Swing diameter: 540 mm. Turning length: 1500 mm. Spindle bore: 103 mm. Spindle speeds: 9–1800 rpm. Multifix C tool post. Fixed steady rest. Swarf protection cover. For further details, see the technical data sheet. Space requirement: length 3.8 m, width 2 m with back panel, height 2 m with back panel. Weight approx. 3500 kg. Rjdpfx Agjx Hr Dus Nop

Condition: used, Year of construction: 2017, operating hours: 7,150 h, functionality: fully functional, GENERAL SPECIFICATION 1.1. AXES SYSTEM - Travel : o X axis: 1300 mm o Y axis : 670 mm o Z axis : 625 mm - Spindle to table surface : 150~775 mm - Motor power : o X axis : 3.0 kW o Y axis : 3.0 kW o Z axis : 3.0 Kw 1.2. CAPACITY - Table size : 1500 x 670 mm - Table surface : T-slot 5–125 x 18H8 mm - Max. workpiece weight : 1300 kg - Max. workpiece height : 700 mm 1.3. SPINDLE HEAD - Motor power (Cont./30min.) : 15/18.5 kW Rsdpfx Agjx Ecybj Nsp - Max. spindle speed : 12.000 rpm (optional) - Max. torque (short term) : 117.8 N·m - Taper type : ISO # 40, 7/24 Taper 1.4. TOOL MAGAZINE - Tool storage capacity : 30 scule - Tool shank : MAS403 BT40 - Pull stud : PS806 (NIKKEN) - Maximum tool diameter : o Continuous : Ø80 mm o Adjacent pots empty: Ø125 mm - Max. tool lenght : 300 mm - Max. tool weight : 8 kg - Tool change time (Tool-to-tool) : 1,2 sec - Tool change time (Chip-to-chip) : 3,4 sec 1.5. RAPID TRAVERSE - Rapid traverse: o X, Y axis : 36 m/min o Z axis : 30 m/min - Max. Cutting feedrate :15.000 mm/min - Ballscrew (Diameter x Lead) : o X, Y axis : 40 x 12 mm o Z axis : 40 x 10 mm 1.6. ACCURACY - Positioning : ±0.005 mm - Repeatability : ± 0.002 mm 1.7. LUBRICATION UNIT - Tank capacity : 0,7l 1.8. COOLANT SYSTEM - Tank capacity : 325 l - Pump motor power : 0,4 kW - Max. flowrate: 40 l/min 1.9. DIMMENSION AND WEIGHT - Dimmensions (LxlxH) : 2597 x 3350 x 3120 mm - Weight : 8.500 kg 1.10. OTHER CHARACTERISTICS - Electrical power supply : 3Ph-AC220V/60Hz x 33,5kVA - Air power supply : 0,54 MPa x 250 Nl/min - CNC Control : Fanuc i-Series 1.11. Accessories: • TSC 20 bar • 12.000 rpm • Chip conveyor

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Redowkaalepfx Ag Njp Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Rjdpfjv Ibkbex Ag Nsp Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 tons

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, center height: 500 mm, center width: 700 mm, turning length: 3,000 mm, Parallel Lathe ZMM-SIBIMEX CU 1000/3000 Year of manufacture: 2007 CE Certification Excellent overall condition Center height: 500 mm Maximum turning length: 3,000 mm Swing over bed: 1,090 mm Swing over cross-slide: 690 mm Spindle bore: 155 mm Bed width: 700 mm Motor power: 22 kW Weight approx.: 8,000 kg Number of speeds: 24 Rodpfxsylazwo Ag Nep Spindle speed: 6.3 - 1,250 rpm Speed range Machine complete with fixed and travelling steady rest Self-centering chuck 4-jaw faceplate Powered tailstock Elbo position display Rapid traverse for feed

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm Rsdpfexvdtwex Ag Nsp max. table load 700 kg spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor

Year of construction: 1979, condition: good (used), 3-jaw chuck Multifix tool holder device tail stock Rsdponqy Hajfx Ag Nep Technische Daten / technical details: Drehlänge / turning lenght 1000 mm Dreh-Ø über Bett / turning Ø over bed 520 mm Dreh-Ø über Schlitten / turning Ø over sledge 300 mm Drehzahlbereich / spindle speed 30-1600 UpM /rpm Gewicht der Maschine ca. / weight 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Technical data: Working length: 2050 mm Rsdpfx Aexruvzog Njp Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.