Strip/pre-leveller

FROEHLING 1.750 x 3 mm

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm Klsdpfxoip Uqmj Adwsl ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Kedpofg E Hpjfx Adwoll Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,500 h, Peak Performer 50P.1600 - Pass-through width 1,600 mm - Max. part thickness 0.5–17 mm - Cleaning system Kedpjw Iy Rwjfx Adwell For further information, please feel free to contact us.

Year of construction: 1991, condition: good (used), machine/vehicle number: 07282, Offer 22336 Klsdpfx Adomdqllswel Technical data: - max. working width 3030 mm - max. sheet thickness without bending 4 mm - max. sheet thickness with bending 3 mm - 3 driven rolls - roll diameter top / bottom 205 / 185 mm - working speed m/min - drive - brake motor 400 V / 7,5 kW - space requirement approx. W 5500 x D 1400 x H 1300 mm - weight approx. 4,7 t - with - bending - Rear roller inclinable, - hinged bearing for swinging out the top roller - extended roller ends for mounting of profile rollers - right + left rotation - separate control panel

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Kledehrnbkjpfx Adwol Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device Klsdpfx Adjhigmbswol with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm Kjdpfx Aob Tdqujdwjll table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 16 mm, cutting length (max.): 6,000 mm, HYDRAULIC SHEAR LVD MVSB 62/16 Serial number 18478 Yom 06/1991 TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 6200mm Distance between uprights 6400mm Gap 60mm Range back gauge 1000mm Min. cutting angle 0.5 ° Kljdpfxeumhm Ao Adwsl Max. cutting angle 2.5° Min. number of strokes/min. 6 Max. number of strokes/min 25 Min. blade clearance 0.05 mm Max. blade clearance 1.6mm Motor power 30kW Approx weight 35000 Kg LxWxH 7100x2400x3000mm Accessories included; ELGO P85 “GO-TO” for back gauge Electrical adjustment of back gauge 1000mm 1 x Front support 2mtr, one with 90° square arm front support L2000mm Foot pedal Ball bearings on table Inclinable back gauge with manual hydraulic pump

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: Kljdpfxjrz Nflj Adwjl The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min Kedpfx Aelp U D Tedwjll ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t