Machining center

GANNOMAT PROTEC 571A

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Redpjuxqzusfx Ag Nop Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Rsdpfxemt Hhwo Ag Nsp Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Rodpogf Sw Nofx Ag Njp As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades Redpfxou U Hgij Ag Nsp System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Rsdpfx Agewukyqe Nep Total number of drilling spindles: 16

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Redpfov Erkajx Ag Nop Some of the pictures show options that are not included in the offer.

Condition: used, Bütfering Optimat SCO 113 - Diamond C + LACQUER CONSTANT TABLE MACHINE / automatic head adjustment Robust frame construction with consistent infeed height of 900 mm, achieved by adjusting the machine’s upper section. Workpiece thickness settings: 3 - 160 mm 1st unit: combination steel contact roller and electronically controlled segmented sanding pad unit, CPS II system, with variable sanding pressure 2nd unit: cleaning brush unit Stable VACUUM TABLE for large-area workpiece support Enhanced workpiece holding via suction clamping device – high-performance blower with control valve integrated in the machine stand. Table segmentation can be activated via terminal Extendable workpiece support Working width: 1350 mm Stepless feed speed: 2.5 – 13 m/min LACQUER SANDING PACKAGE: Vacuum table with lacquer carpet and 3 kW vacuum generator Stepless belt speed for lacquer sanding: 2 – 18 m/sec Oscillating belt guidance for 1350 mm working width Rsdpfx Agjxur Iys Njp Motor power 1st unit: 15 kW Motor power 2nd unit (cleaning brush): 1.5 kW 14" touchscreen control for automation and management of all work programs Machine is FACTORY-REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm - With oscillation motor - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine Rjdpfxew Hf D Ij Ag Njp The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Biesse Rover A 1542 CNC Machining Center Working area X: 4140 mm Working area Y: 1560 mm Working area Z: 245 mm 5-axis electrospindle, HSK-F63 interface Vertical drilling heads: 17 Horizontal drilling heads in X: 6 Rjdeyh Nd Repfx Ag Nop Horizontal drilling heads in Y: 4 Grooving saw blade 25-position tool changer Worktable with 8 beams

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Vertical machining center X-axis working area: 3200 mm Y-axis working area: 1250 mm Z-axis working area: 60 mm Electrospindle and tooling groups: 6.5 kW electrospindle with HSK-F interface and C coupling axis HSK F63 saw blade unit, max diameter 140 mm HSK F63 group, manually adjustable/tiltable for milling or sawing 8-position tool magazine Rsdpfx Agoydpg Ts Nop Lower drilling unit BH21: Processing unit consists of: - 13 independent vertical spindles - 4 independent horizontal spindles, positioned along the X and Y axes, including: - 3 spindles in the X direction (2 units with double output) - 1 spindle in the Y direction (1 unit with double output) Upper drilling unit BH23: Processing unit consists of: - 14 independent vertical spindles - 4 independent horizontal spindles, positioned along the X and Y axes, including: - 3 spindles in the X direction (2 units with double output) - 1 spindle in the Y direction (1 unit with double output) - 1 grooving saw unit, diameter 120 mm, fixed working direction along X bSolid software Perimeter safety fences and safety mat Panel referencing system Machine structure Panel handling unit Worktable Safety devices Electrical and electronic cabinet Transformer and electronic power supply Electrical cabinet air conditioning system Manual QR code laser reader Provision for panel unloading unit Side transfer unit, L = 2200 mm, for returning panel to operator Panel discharge belt Machine weight: 2500 kg Machines in excellent condition