Hochl. Column drilling machine

GILLARDON GB 50 V

Condition: used, Year of construction: 1976, turning diameter over bed 600 mm Gbodew Tdxcepfx Aatjt turning diameter over slide rest 400 mm turning length 1000 mm turning diameter in the gap 850 mm turning speeds 15 - 810 U/min centre height 300 mm spindle bore 56 mm total power requirement 9,0 KW weight of the machine ca. 2,9 t dimensions of the machine ca. 2,8 x 1,45 x 1,65 m Center lathe - Forkardt 3-jaw chuck F 315 - Single-jaw tool post - Steady rest - Live center - Chuck guard, limit switch monitored - Chip tray

Condition: new, functionality: fully functional, empty load weight: 9,000 kg, loading space volume: 35,000 m³, tire size: 385 /65 R22,5, Year of construction: 2026, operation weight: 60,000 kg, chassis manufacturer: Lider, Equipment: ABS, 4 Axles Heavy-Duty Tipper. Godporcb N Eofx Aatjbt Lider Trailer for Heavy-Duty Trailers. High Quality and Durability Manufacturing. EU Standards. One-year Warranty for Manufacturing Defects. EBS or Double Line Brake Systems. Customer Requested Color. 2026 Production

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20,3/14,5 (40/100%ED) Cooling Cooling through the Spindle Center bar: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 Gsdpfx Aaoznniaotsbt With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm Gbjdpfx Aajv Tpxqotet -Weight: 3900 kg

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Gedpsnkb Urefx Aatebt Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Gsdpfex S Rcmjx Aatebt

Condition: good (used), Year of construction: 2012, Vertical CNC turning machine with a 12-position turret and powered tools; Year of manufacture 2012, in good condition; Fanuc 31i control system with Manual Guide i; 630 chuck – 900 mm turning diameter; Automatic door; 2-stage gearbox – resulting in very high torque; Tool setter, detachable; Chip conveyor; Various tool holders, fixed and powered; Only approximately 4,100 operating hours. An inspection is possible and recommended by arrangement, with the machine powered on. Gbedpfeztqp Hox Aatot

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm Gedpfx Ajx R Em Djatjbt max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Gsdoharwvjpfx Aatsbt Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Gjdpfxox E Um Nj Aatjbt Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.