Radial Drilling Machine

GIRARDS radialbohrmaschine

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: Pgodpsrn Riqefx Ab Ijw max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW Psdpfxevcrmpj Ab Iegw weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 23 mm x-travel 400 mm y-travel 285 mm total power requirement 3 kW weight of the machine ca. 1.400 kg Pjdst Hw Sbepfx Ab Iogw dimensions of the machine ca. m

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Pgedpjwrxqxjfx Ab Iow Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix Podpstximvefx Ab Iegw MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Pgjdpfx Abextpqvo Iow

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Pgodpfx Aolhwr Reb Iew Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle mount MT 5 Podpfxstwzk Do Ab Isgw Throat 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Feed • Right-to-left travel • Motorized up and down travel • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Pjdsv S Ad Rspfx Ab Ijgw Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Weight: kg 24,000.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 4,000 mm, total length: 6,500 mm, total width: 1,500 mm, total height: 1,500 mm, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, The PORĘBA TPK 80 x 4000 universal lathe was professionally overhauled and modernized in our workshop in 2020. Due to internal restructuring at the customer, we bought the machine back from the customer in November 2024 and comprehensively revitalized it. The machine is now in perfect technical and optical condition. Pgedjvlw Dxepfx Ab Iew We provide a 3-month warranty on the machine (material, spare parts and electric). Technical parameters: Turning length: 4,000 mm Turning diameter over bed: 800 mm Turning diameter over slide: 530 mm Spindle hole diameter: 95 mm Drive on the upper slide drawer for taper turning Max. workpiece weight between centers: 6,000 kg Max. workpiece weight with 1 optional steady rest: 7,500 kg Max. workpiece weight with 2 optional steady rests: 9,000 kg Equipment: Tailstock, cooling pump, Following additional accessories are included: - Digital Read Out 3 axes with display - Steady rest, Ø 0-400 mm, with rollers - 4-jaw chuck 800 mm, BISON - Universal Multifix Tool Holder