2019 Greda MITIKA V

Greda MITIKA V

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. Dedpfx Adjwdm U Nedscr X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: used, Year of construction: 2004, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 77203, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, table length: 7,000 mm, table width: 1,500 mm, coolant supply: 15 bar, spindle motor power: 37 W, Equipment: documentation/manual, Accessories Automatic Milling Head (0.001 degrees in both planes) Cooling Through the spindle 60 ATC Chipconveyor Renishaw RMP60 part measuring Floorplates 7000 x 1500 mm Rotary Table 1200 x 1200 mm (5t) Extra manual Milling Head Djdpfswu R R Njx Addscr

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 1,00,000 mm, total length: 2,12,000 mm, overall weight: 1,00,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Dsdperx Rxtefx Addecr Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Dcjdjmzbkrspfx Adder Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: used, functionality: limited functionality, machine/vehicle number: SI 2051, Year of construction: 2015, operating hours: 24,207 h, total length: 2,500 mm, total height: 1,300 mm, total width: 2,190 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, power: 8.6 kW (11.69 HP), EOS M290 DMLS Additive Manufacturing Machine (2015) Build Volume: 250x250x325mm Dcsdpowthcmsfx Addsr Laser Type: 1x 400W (Laser showing low power & will need replacing or refurbish) Power Supply: 1 x 32A Power Consumption: 8.6KW Compressed Air Supply: 7 Bar Machine Dimensions: 2500 x 1300 x 2190 Machine regularly serviced up to 2023, since then machine has not operated. There are some minor issues because of it - platform motors require replacing, along with Prox Sensors & Pinch Valve, but this is reflected in the sale price of the machine. Sale Price = £49,990.

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 2,889 mm, space requirement length: 11,292 mm, space requirement height: 2,675 mm, overall weight: 36,000 kg, temperature: 150 °C, operating pressure: 6 bar, pressure: 6 bar, power: 110 kW (149.56 HP), type of input current: AC, operating temperature: 150 °C, Equipment: documentation/manual, Equipment Type: Dry Product Capacity: Circa 500kg/hr Djdpfjt Uqldox Addecr Design Conditions: 150oC; 6barg/ Full Vacuum Materials of Construction (Product Wetted): 304L SS, Viton O-Ring, PTFE Reinforced Flat Gaskets Electric Motor: 3 Pole / 480V / 60Hz, 110kW, 1780 rpm, Eex de IIB T4, IP 65; Horizontal, Single-Shaft, Continuous, Vacuum Kneader- Dryer Single step direct (contact) evaporation/drying process 3 heating zones on shell, 2 heating zones on agitator Twin screw feeder General Applications: Drying of products exhibiting multiple phase change e.g. Liquid –> highly viscous –> pasty–> free flowing powder or granular solid Ability to handle foaming, stickiness, crusting & required variation of temperature and drive input requirements Self-cleaning design and heavy duty/high torque to promote heat and mass transfer Potential Applications: Drying of a crystalline mass, e.g. Anti-Oxidants: Typical solvents: Methanol, Cyclohexane, Isopropanol Industrial Residues: Recovery of hazardous / valuable materials from wastes. E.g. TDI (Polyurethane monomer) from distillation residue Drying of paint and lacquer sludge Recovery of water/toluene from rubber residues Recovery of solvents from vitamin distillation residues Polymerisation Reactions..

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Complete plant with Used Weinmann WBZ 160/12 Flexline in very good condition Dsdpfx Aewi It Deddocr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (min.): 178 mm, paper width (max.): 364 mm, paper height (min.): 178 mm, paper height (max.): 660 mm, number of feeding trays: 4, counter reading (color): 22,88,359, year of last overhaul: 2024, type of input current: three-phase, iGen 5 150 Dedpfx Ajw Hgq Ajddecr

Condition: good (used), Year of construction: 2000, travel distance X-axis: 4,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,460 mm, table width: 2,130 mm, table load: 40,000 kg, table length: 5,000 mm, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortisation due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 4300mm Y-Axis: 1200mm Dcsdpfx Adswrcydsdsr Z-Axis: 1460mm Table Length: 5000mm Table Width: 2130mm Table load: 40000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 10060mm Width: 9100mm Height: 3990mm Weight: 40000kg

Condition: used, machine/vehicle number: 008171, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 35 Dodpfxoxaud Us Addecr Total number of tool changer positions: 18