Stacking device / Automatic magazine

GRUNDNER SONDERMASCHINEN MLD

Condition: used, Year of construction: 2021, operating hours: 489 h, Homag EDGETEQ 300 Csdpfxoz D U A As Aizeri The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Credpfjy Ehrxox Aizsi Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Cedpfxsw I E Dvs Aizjri

Condition: new, Cefla painting system Crjdpfswhbrwox Aizsi

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Crjdpfx Aiev R Nk Uezoi Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine Cjdpfxjzukure Aizjri - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit Credpjzutrasfx Aizsi - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 22,891 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Credpfxjz E Rinj Aizji Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Crjdpfx Aisy S Edxszsi Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer Codpfx Aeyufixoizori