Steel holder

Guss 260/160/H220 mm

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT Ihodpox Dmi Dsfx Abcew CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm Ihsdsupw T Rjpfx Abcew table height 160 mm T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm Ihedeupw Twepfx Abcjw table height 150 mm T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable

Condition: good (used), Upper support Ijdjdq Nvispfx Abcohw Slide width 145 mm Height 72 mm Bolt circle diameter 180 mm Centring spigot diameter 70 mm Surface 240 x 220 mm Weight 23 kg Transport dimensions: L. 490 mm B. 220 mm H. 270 mm

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Isdpfx Abeynky Ajcjhw Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: used, tool clamping area 150x18 mm weight 0,001 t Iodpfx Asd Iha Tebcehw turning tool with insert - like new. L/W/H: 250x40x100 mm

Condition: good (used), Solid machine vice Manufacturer: WMW Designation: Jaws: 200 x 50 mm Clamping width: 300 mm Footprint: 580 x 190 mm Height: 150 mm Weight: 63 kg Total dimensions: 660 x 190 x 150 mm Price: EUR 600,-- per piece (2 pieces available) Ihsdpouithisfx Abcsw Price incl. 19% VAT: EUR 714,-- per piece ( 2 pieces available) Price for 2 pieces: EUR 1.000,-- plus 19% VAT.

Condition: used, Gears, spur gears, angular gears, worm gears -Gear: Worm gear, unfortunately unused without type designation -Translation: i = 40 -Hollow shaft: Ø 11 x 23 mm / 14 x 67 mm -Hole circle: Ø 87 x 9 mm Iodpfep Udilox Abcjhw -Quantity: 3x gears available -Price per piece -Dimension: 100/100/H115 mm -Weight: 1.2 kg

Condition: used, machine/vehicle number: 721, jaw width: 200 mm jaw height: 62 mm span length: 250 mm Iodpfx Asc U Nruobcehw place requirement: 500 x 280 x 165 mm weight:

Condition: good (used), Support bearings for Union Boring mills BFT80 and BFT 80/2 with fixed face support -short version Iodpfxecw Sths Abcohw -for spindle diameter 80mm