Press brake

HÄMMERLE BM 299-3100

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Nledpfx Aorq D Nielhec The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Year of construction: 2004, condition: excellent (used), High quality fully serviced Bystronic 200ton x 4metre cnc pressbrake for sale • Pr6 200 x 4100 • Make: Bystronic Edwards Pearson • Model: PR 6 Pressure Reference • Year / new: 2004 • Total axis:6 – 4axis back gauge X R Z1 Z2 • Hydraulic crowning • Free standing no pit required • Capacity / bed size / tonnage: 4metre x 4100mm x 200ton • Cnc control: Cybelec Modeva 10S control Nljdpfon Smafex Alhec

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,520 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 15,000 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, Safan press brakes are reputable sheet metal working machines from the Dutch manufacturer, well recognized in the market. The SAFAN E-Brake series is equipped with electric drives, which have been successfully implemented in our machines for almost 30 years. Currently, the largest model of electrically driven presses is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Nodpfx Aex Ewnpelhslc Lenze motors and servomotors, controlled by long-life inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to its innovative drive, the machine uses electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force of springs mounted on both sides of the machine. Additionally, during idle periods, the machine consumes virtually no electricity, as the system does not include a hydraulic pump motor maintaining pressure, as is the case with hydraulic presses. Energy consumption is estimated to be up to 70% lower compared to conventional hydraulic presses. Furthermore, the electric drive is insensitive to temperature fluctuations that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-3100, model year 2007 - Safan TS 1 controller - 2D bending system - 13” color touchscreen - Control panel on a movable arm - CNC-controlled Y1/Y2 axis - CNC-controlled X axis - CNC-controlled R axis - CNC-controlled Z1 + Z2 axis - Wila upper tool adapter (mechanical clamp) - Safan OBS/3 lower tool table (compatible with Wila and Promecam tools) - Lightguard safety system with upper beam descent control - Work area lighting at the front and rear of the machine - Electrical installation: 3/N/PE 50 Hz 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Nsdjxzf Dzjpfx Alholc

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Used hydraulic press brake Manufacturer: Hämmerle Nsdpfx Aloyklwnoholc Model: 200-3100 Year of manufacture: 1995 The machine is supplied with numerous tools (press brake knives).

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressing force: 135 t, stroke length: 400 mm, operating speed: 200 mm/s, oil tank capacity: 150 l, overall weight: 9,500 kg, travel distance X-axis: 625 mm, controller manufacturer: ESA, controller model: ESA S550N, working width: 3,050 mm, bending force (max.): 135 t, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Nsdpfx Aswqhw Ejlholc

Condition: refurbished (used), functionality: fully functional, CAZENEUVE HB 725 x 2000 Lathe Distance between centers: 2000 mm Center height: 315 mm Max. turning diameter over bed: 725 mm Max. turning diameter over saddle: 670 mm Max. turning diameter over cross slide: 400 mm Spindle bore: 81 mm Tailstock taper: MT6 Max. cross slide travel: 400 mm Number of spindle speeds: 18 Nlsdpoy Ncuvofx Alhoc Power: 18 HP Spindle speed: 20 to 1,600 rpm Dimensions (L x W x H): 3,640 x 1,270 x 1,355 mm Weight: 3,100 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW Njdpsb A Nausfx Alholc -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Nsdpfxsw N Shke Alhjlc