Hydr. pressbrake

HACO ERM25100

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9518 202-5, Offer 24361 Technical data: - 3 individually motor-driven rollers manual + controlled operation - Max. Torque per roll 1600 Nm - Stroke of bending roller X-axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm - Shaft diameter 105 mm - Roll diameter up to approx. 260 mm - Effective length of standard shafts approx. 300 mm Cjdpfx Adjt Nfv Tjdsaa - Shaft rotation infinitely variable 1 - 22 rpm - Bending capacity e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm - Roller drive 400 V / 3 x 1.1 kW - Hydr. drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. kg - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - PC 100 control unit in separate control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bending set for flat and angled material - Steel + plastic tube roller sets

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW Cedpfx Aswwwqhsddoaa feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen Cajdpfx Adswmk Ewjdja – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) If you have any additional questions – please contact us, we will be happy to answer.

Condition: excellent (used), Year of construction: 2002, We now have two Kardex Shuttle XP 500 units from 2002 in good condition available. These Vertical Lift Modules (VLMs) are a great solution for saving space and improving storage efficiency. Each tray is 2650 mm wide and 864 mm deep, and can hold up to 485 kg. The system helps speed up picking times and boosts productivity by using automated handling and flexible tray setups. Caodpfx Aowl Inmjddsa This is a reliable model, and we can provide both original servicing and spare parts in the future. Machine specifications: Manufacturer: Kardex Remstar Manufacturing year: 2002 Model: SHUTTLE-XP-500-2650x864 Height: 7,000 mm Width vertical lift module / tray: 2,980 mm / 2,650 mm Depth vertical lift module / tray: 3,074 mm / 864 mm Number of trays: Approx. 21 trays per lift Maximum weight per tray: 485 kg Electronics: 3/N/PE 400V, 3x17A

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Cjdpfjrdg H Hox Addjaa Year 2017 Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells Codpfx Aowfc S Toddjaa -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm Casdpfx Aeriulgjddoa spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: reconditioned (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Mach. no.: 2202-10147 with guarantee Csdsfcqfpopfx Addjaa geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawing thread S 20 x 2 - Central lubrication, manually operated - Coolant system - Operating instructions - Used, as seen -

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Casdpfed Spf Rex Addoa Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: excellent (used), Year of construction: 2001, Technical data: Year of manufacture: 2001, service in 2024 Working length: 3100 mm Stand width: 2650 mm Pressing force: 300 tons CNC control: Robosoft BC55 touch graphics 2D Controlled axes: Y1 / Y2; X CNC table bending compensation Projection: 300 mm Stroke: 350 mm Motor power: 18 kW Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Cajdpfx Aovy H Iioddsa Weight: approx. 19 tons Accessories: various tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.