Press brake

HACO TS 3012

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW Blodpfxsznvgmo Aiasp electric stops weight 8500 kg

Condition: excellent (used), functionality: fully functional, operating hours: 6,223 h, CASE CX290B Crawler Excavator Kawasaki Hydraulics, Isuzu Engine Technical specifications: - Engine: Isuzu AH-6HK1X (6-cylinder, turbocharged, common rail) - Engine power: approx. 154 kW (209 HP) at 1800 rpm - Operating weight: approx. 29,100 kg - 30,000 kg (depending on equipment) Bledoygy Awspfx Aiasp - Hydraulic system: Variable displacement piston pumps (Kawasaki) ensuring smooth combined movements - Maximum digging reach: approx. 10.5 - 10.7 m - Maximum digging depth: approx. 7.1 m - Bucket capacity: standard approx. 1.2 - 1.6 m³ - Hours: Original 6,223 operating hours – well-maintained machine, regularly serviced, hour meter fully functional and legible Advantages of the CX290B model: - Hydraulic quick coupler: Fast and efficient attachment change without leaving the cab - Full hydraulic circuit: Equipped with additional lines on the boom for hammer, shear, or grapple operation - Cab comfort: Spacious cab with excellent visibility and air conditioning - Durability: Heavy Duty undercarriage designed for tough working conditions - Electronics: Control system offering multiple operating modes (H, S, E) for optimized fuel consumption Condition: Machine as shown in photos; tracks and undercarriage in good condition. Ready for testing on site.

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec Bledpjxab I Tjfx Aiajp return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals Blodpfxsyugvao Aiasp The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: used, Year of construction: 2006, operating hours: 9,237 h, Equipment: all wheel drive, Equipment: * Year of manufacture: 2006 * Operating hours: 9,236 h * Power: 157kW / 213 hp * Weight: 19.8 t * Tires: Michelin 23.5-25X Type A approx. 60% * Reversing camera * Steering wheel control * Air conditioning * Tow pin * Central lubrication system * Suspension seat * Radio pre-installation Other details: * 1 previous owner * German machine * CAT service records maintained Bledpfx Aezlvm Uoiasp * Last service at 9,003 h * Signs of use * Rust present Since 1972, your reliable partner for all matters concerning automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke continuously offers approx. 200 vehicles, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special low rates. If interested, we will be happy to provide you with an individual quote! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offers generally come WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged by our external partners for an additional fee. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing or data transmission errors. Equipment listed may require separate verification. Subject to prior sale and errors.

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Bledpfxezi Duhe Aiaop Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm Bjdpfjxab Erex Aiaolp stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Bjdpfx Aiji Dx Sbsaslp

Condition: new, functionality: fully functional, Year of construction: 2025, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 930 mm, overall weight: 7,500 kg, total length: 4,350 mm, total width: 1,820 mm, total height: 2,680 mm, input voltage: 400 V, input frequency: 50 Hz, pressing force: 100 t, table length: 3,060 mm, Equipment: CE marking, documentation/manual, safety light barrier, Unique opportunity for those seeking a top-of-the-line, immediately available CNC press brake. We offer a SafanDarley E-Brake 100-3100, 100% electric, a NEW machine installed in our showroom exclusively for technical demonstrations and customer presentations. The machine has never been used in production; the few operating hours are solely related to demonstration activities. Key features: • New machine from showroom • Never used in production • Ready for immediate delivery • High-efficiency electric technology • High bending accuracy and repeatability • Reduced operating and maintenance costs compared to traditional hydraulic presses Blodpfezcmabsx Aiaep Machine configuration: • EC20 Touch graphic touchscreen control with 2D bending simulator and automatic bending sequence calculation • Motorized and independent Z1+Z2 axes • Extra back gauge Z0+Z3 • Wila upper table with hydraulic locking • Wila lower table with mechanical locking and a set of bars for using Schiavi-type dies • Mobile aluminum front supports • Integrated photocells • Clear opening 590 mm / stroke 300 mm • Interface for Industry 4.0 The machine is offered for sale exclusively due to the renovation of the exhibition area and the replacement of the model currently in the showroom.

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can Bjdpfovwgmgjx Aiaelp be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)