Drilling and Milling M/C

HBM BF 25

Condition: new, bore capacity in steel (diameter) 25 mm throat 175 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 380 mm 175 mm table surface area 700 x 180 mm connected load frequency 230 V max. distance between table and spindle-nose max. 320 mm total power requirement 0,75 kW weight of the machine ca. 150 Kg dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Ledpfx Adeupxtfowsrg spindle protection. incl. tool box with various tools

Condition: excellent (used), 5-axis combined machine (thickness planer, jointer, mortiser, saw, and router) Thickness planer: Usable width: 310 mm Lodpfswh U Eqsx Adwerg Usable height: 230 mm Cutter block: 3 planer knives Joint planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Router: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Router stop Saw: Saw blade diameter: 250 mm, pivotable by 45°. Cutting height with 250 mm blade: 80 mm Table width: 800 mm Rip fence length: 635 mm Mortise drilling machine: Mortise milling from (0 to 16 mm) Power and motors Voltage: 380 V Connection: Three-phase Location: From stock, 54634 Bitburg - Available immediately -

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Lrodpfxewki Aps Adweg Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: new, ELMAG STBS-500 masonry band saw STBS for dry cutting (bricks, aerated concrete, insulating material) The STBS series masonry band saws are specially designed for use designed for use on construction sites. In dry cutting, they are suitable for the precise processing of materials such as aerated concrete, bricks, lightweight poroton, expanded clay and wood, but also for insulation boards such as Styrofoam and Styrodur. ADVANTAGES Connection piece for dust extraction available Saw blade tension easily and optimally adjustable with handwheel Includes forklift pockets and lifting eye Constant saw blade tension and 440 mm running wheels for reduced risk of blade breakage and precise cuts Direct drive with geared motor on extra motor console Automatic saw blade switch-off at the end of the cut Machine stops when the doors are opened Short saw blade change times Ljdpfx Adst Egfzsworg Straight, miter and manual contour cuts possible Precise band guide, adjustable to the block height Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height 500 mm Cutting length 660 mm Angle 0 - 45 ° Saw blade dimensions 3850x27 mm Table size 710x1060 mm Rated power 1.85 kW Mains connection 230/50 V/Hz Dimensions 1050x900x1840 mm Weight 203 kg

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Lredeg Npiwepfx Adwsg Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: new, Technical data: Minimum cutting width: 300 mm Max cutting width: 400mm Max cutting height with standard blade guide: 350 mm Max cutting height with special blade guide: 410 mm Belt length: 2720 mm Motor power: 1.1 kW Advantages: -They are safe and easy to use machines, manually operated by the operator. Ledpfsmiiktox Adworg -Designed and built to cut materials such as: solid wood, panels, plywood boards, also laminated or edged -They are suitable for both small jobs and mass production -The main advantage that distinguishes MD Dario band saws from conventional models is the articulated arm with a special system of joints that allow the machine to rotate freely in all directions and angles, thanks to which the user can make precise cuts - The saws have 3 rubber-coated flywheels, thanks to which it is possible to perfectly guide the saw and use band blades of different sizes depending on the type of cut Work table and tilt included.

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min Lsdpfeupxcysx Adwerg 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, ELMAG Stone cutting machine (incl. slide) STM 600/350, 230 Volt STM 610/350 The impressive stone cutting machines deserve a closer look due to their robustness, perfect handling and, last but not least, a very good price/performance ratio. It simply cuts everything: tiles, exposed aggregate concrete slabs, paving stones, marble and granite, bricks, clinker, artificial stone ... Lsdpfxst Hvlgo Adwerg Ideal for construction companies, gardening firms and pavers. ADVANTAGES Lockable spring tensioner for resetting in two saddle bearings S1 water pump Disc cooling with metering valve Powerful drive motor 2.2 kW / 230 V Safety switch with zero-voltage release Long service life: roller table steel rollers above water Precise: Adjustable longitudinal stop, measuring scale Unsurpassed cutting unit for very large cutting depth in reverse cut. Includes segmented diamond blade for universal use TECHNICAL DATA Cutting capacity depth/length 105 / 600 mm Diamond blade Ø 350 mm Diamond blade bore 25.4 mm Rated power 2.2 kW Voltage/frequency 230/50 V/Hz Dimensions 1130x570x1600 mm Weight 72 kg

Condition: new, ELMAG gearbox milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, you can cover a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Tapered arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available Ledpfot Ed Erjx Adwerg TECHNICAL DATA Drilling capacity in steel 20 mm Tapping capacity M14 Milling capacity face milling cutter 63 mm Milling capacity end mill 16 mm Spindle holder (turning spindle) MK 2 Speed range 1 50 - 1125 rpm Speed range 2 100 - 2250 rpm Infinitely variable speed steps Quill stroke 50 mm T-slots, width 12 mm Milling head stroke 375 mm Spindle projection 184 mm Milling head swivel range ± 90 ° Quill distance table 0 - 375 mm Milling table surface 500x180 mm Table travel X x Y 280 x 175 mm Motor power 600 W Mains connection 230/50 V/Hz Cubature 500x180x375 mm Length x width 745 x 570 mm Height 935 mm Weight 103 kg

Condition: new, High quality benchtop bending machine with a top equipment. FLOTT TB 13 Plus MK II (212503) FLOTT TB 13 Plus B 16 (212500) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Drilling depth (mm): 60 Tapping capacity (depending on pitch): M10 Speed display: Digital Drilling depth display: Digital Ledei Hpyqopfx Adworg Drilling depth stop: Stop ring (form fit) Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,54 continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) throat depth (mm): 220 column diameter (mm): 70 Usable working surface (W x L) (mm): 300 x 250 Spindle/working surface (mm): 85-370 (table), 420 (foot) T-slot size (arm), distance (mm), dimension width (mm): Cross grooves, number 2, 14/26 machine dimension without packing (mm): 400 x 520 x 850 machine dimension with packing (mm): 452 x 700 x 1.130 Weight (kg): 62 Note: All other models are available on request.