Welding table

Heinrichsglueck Welding Positioner H-36

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Ndodpjnvfdbofx Ag Isd

Condition: good (used), functionality: fully functional, Year of construction: 1989, number of rollers: 3, Over roll 280mm, 12mm Prebending, capacity 18mm 3x top roll diam. Nodpfxjwtp Hae Ag Isdd Weight 7,100kg

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness Ndjdpfx Agow Dnd So Ijd • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: like new (used), Year of construction: 2005, Injection moulding machine ENGEL CL 2550/550 Year of manufacture - 2005 Name of the robot-"ENGEL ERC53/1-F" Closing force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mold height [mm]-310 Max. mold height [mm]-800 Column spacing (mm)-915x860 Size of mounting plates (mm)-1345x1280 Ejector stroke (max) [mm]-250 Auger diameter [mm]-80 Injection weight [g]-1800 Oil quantity [liter]-1000 Nodpfx Ajq Nybgeg Isdd Injection sequence into the mold -2 Machine with robot ready to work Number of hydraulic cores S/R- 1/1

Condition: new, load capacity: 5,000 kg, rotary table diameter: 1,500 mm, pivoting range: 120 °, Capacity: 5,000 kg Max. height center of gravity: 300 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1.500 mm Ndedpfjuf Nu Rex Ag Isd Motor power: 2,2 + 3kw Table tilt (Motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 - 0.5 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: good (used), load capacity: 2,000 kg, Height-adjustable welding turntable Load capacity 2 tons, with infinitely extendable clamping extensions and clamping claws included Very good condition Speed, height, inclination infinitely adjustable Hand and foot remote control Welding current transmission 600 amps Nedpfx Asrmnb Ijg Iodd Dimensions Length: 1940mm Width 1200mm Disc diameter 1200mm Height tilted: min, 700mm, max 1550mm Height horizontal: min. 900mm, max 1700mm Weight 1750 kg

Condition: used, Welding turntable - tilting turntable with hydraulic tilting motion Welding positioner with faceplate PROTARC - ZAAR & Co. Model PF-DF 3000 Serial No. 3620 Year of manufacture: 1985 Load capacity: 3,000 kg Faceplate size: Ø 1100 mm (950 x 950 mm) Faceplate rotation speed: 0.05 - 1.25 rpm Minimum speed: 1 revolution in 10 minutes (tested) Maximum speed: 1.25 revolutions in 1 minute (tested) Table tilt range: 0 - 110° Table height vertical: 1,180 mm Table height horizontal: 940 mm Welding current transmission: 800 Amp. Ndedpfx Ajpy Uz Dsg Ijd Table drive motor power: 2.2 kW Hydraulic motor power: 1.1 kW Power supply: 380 Volt, 50 Hz - Manual control switch for faceplate rotation direction and table speed - Foot switch for clockwise/counter-clockwise rotation and stop - Hydraulic tilting function with 2 hydraulic cylinders - Speed control via frequency inverter Required space (L x W x H): 1,700 x 1,400 x 1,180 mm Weight: 1,600 kg Very good condition

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Nedpsuf Nm Hsfx Ag Iedd Table tilt (Motorized): Tilt speed 0.67 rpm Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: ready for operation (used), functionality: fully functional, number of rollers: 3, working width: 2,500 mm, sheet thickness steel (max.): 8 mm, Used Roundo plate rolling machine 2500x8MM, 3 rolls, fully functional Ndjdexcgrvjpfx Ag Isd

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 201238, Offer 17230 Technical data: - Load capacity 3600 kg - Faceplate diameter approx. 1050 x 1050 mm - Faceplate motorized, swiveling + rotating - Faceplate speed electrically infinitely adjustable 0.2 - 1 rpm - Motorized right + left rotation - Hand remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm Nsdpfxov Hbzks Ag Iodd - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Hand remote control