Section Bender

HESSE by SAHINLER HPK 40

Year of construction: 2023, condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty Iedpeh Rabnefx Af Teib The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: excellent (used), Year of construction: 1994, Technical Data: - 2 hydraulically adjustable rolls - 3 driven rolls - Main motor power: 5.5 kW - Machine can operate horizontally or vertically - Drive shaft diameter: 105 mm - Standard attachment roll diameter: 275 mm - Working speed: 0 – 7 m/min - Digital display Bending Capacities: - Flat steel: 100 x 25 mm - Angle steel: min. 100 x 100 x 12 mm - T-profile: min. 120 x 120 x 13 mm - Round steel: 70 mm - Round pipes: 100 mm - Square tubes: 90 x 90 x 5 mm - CE marking - Dimensions (L x W x H): approx. 1600 x 1500 x 1500 mm - Weight: approx. 3 t Condition: Isdpfeyurwvsx Af Teib Very good condition Accessories: Various tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. Ijdpofg E Hmsfx Af Teib CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: excellent (used), functionality: fully functional, TAURING PROFILE BENDING MACHINE DIAMETER 40 MODEL: ALFA 40 R USED MACHINE Iodpfsyv Hrxex Af Tsib INTERNAL CODE: SVR 399

Condition: used, Year of construction: 2009, machine/vehicle number: 0102-250002, The Behringer HBP310-523GA double mitre bandsaw is a high-quality, robust machine that has been specially designed for professional use in metalworking. It offers an excellent combination of performance, precision and versatility, making it suitable for a wide range of applications in the industry. The HBP310-523GA is sold including roller conveyor in the infeed and outfeed side, feed gripper system and cross feed system in the outfeed area. The machine is in very good condition. Working areas of the HBP310-523GA saw Mitre left 75° round 310 mm, flat W x H = 520 x 310 mm 60° round 310 mm, flat W x H = 450 x 310 mm 45° round 310 mm, flat W x H = 350 x 310 mm 30° round 230 mm, flat W x H = 230 x 310 mm Mitre right 75° round 310 mm, flat W x H = 500 x 310 mm 60° round 310 mm, flat W x H = 420 x 310 mm 45° round 270 mm, flat W x H = 270 x 310 mm Iedpfxjyh Ixas Af Teib Minimum round: 20 mm Maximum material length: 10 m

Condition: new, Year of construction: 2026, The CORMAK PS-180 rotator is a versatile auxiliary device that can be used in various production tasks. A wide range of possibilities makes it suitable wherever elements need to be manipulated. The welding, painting and mechanical industries appreciated the quality and rotational capabilities of our positioners. CORMAK rotators are an ideal solution wherever components or subassemblies need to be rotated, wound or rolled. Here are some key features and applications of the welding positioner: 1. Versatile use: This rotator can be used in many different types of assembly and welding work, making it a versatile tool in workshops and production plants. 2. Work on cylindrical elements: It is particularly useful when welding cylindrical elements, such as tanks and pipes. Thanks to the ability to rotate the disc in the range of 0-90°, it allows welding in the optimal position, which translates into the quality of welds and work efficiency. 3. Durability and strength: The solid construction of the machine makes it durable and resistant to intensive use. This, in turn, translates into the durability and reliability of the device. 4. Speed Control: The ability to adjust the speed of the rotator disc is important because different tasks may require different speeds, allowing you to tailor the unit to your specific needs. 5. Control pedal: The presence of the pedal allows the operator to precisely control the operation of the rotator. The operator can easily adjust the speed and direction of rotation of the disc, which is important during welding and assembly. 6. Mounting grooves: Mounting grooves allow the installation of handles and jaws, which increases the versatility of the device and allows for secure holding and rotation of components. 7. Simple and partially automated production processes: This device can be used in production processes, both in tasks performed manually by the operator and in partially automated processes, which speeds up work and increases precision. To sum up, the CORMAK PS-180 rotator is a valuable tool that is used in many industrial fields, especially where there is a need to rotate and weld cylindrical elements. Thanks to its versatility, speed regulation and precise control, it provides valuable support for operators when performing various assembly and welding works. Technical parameters: Rated load 10 kg Worktable size φ180 mm Tilt angle 0°～＋90° Rotation speed 1 ~ 8 rpm Rotational power 15W Manual tilt Voltage 220V-1PH-50HZ Dimensions 260x320x280 mm Weight 10 kg Iodpfx Aorigkpof Tsib *three-jaw chuck is not included in the set

Year of construction: 2023, condition: new, PLASM PLOTER MODEL MTX 1530 Ventilated Construction: steel+aluminum Working field: 3000/1500/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: Hiwin IGUS guide Automatic material detection system Power supply: 240V Permissible load: 1800kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system Hiwin wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with Hiwin brand rails Ventilated table adapted for fume extraction INCLUDED: -ventilated table -control software in Polish Iisdonfvlgspfx Af Teb -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end DXF,PLT import Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDE RAILS OF RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 20400 € 391.68 € 80 mm 245 mm 3 4 kW 6 m/min 100x20 mm / 2000 mm; 80x2 125x25 mm / 600 mm; 60x5 45x45 mm / 500 mm; 15x15 Ø 50 mm / 500 mm; Ø 15 mm Iiodpfxowirvvs Af Tob Ø 100x2,5 mm / 1.200 mm; 80x25x3 mm / 800 mm; 25x1 70x70x3 mm / 1.300 mm; 25 80x80x8 mm / 800 mm; 30x3 70x70x7 mm / 700 mm; 30x3 UPN 140 / 1600 mm; UPN 12 UPN 140 / 1.600 mm; UPN 1 IPN 120 / 600 mm; IPN 80 1450 mm 1000 mm 1400 mm 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES!

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Eco (A) Plus Year of manufacture: 2016 Ijdpoy Auxmofx Af Toib CNC control Working area: 1,500 x 3,000 mm 1 x plasma with Kjellberg HiFocus 161i power source Prepared for retrofitting autogenous torch Filter unit Kemper System 8000 with pre-separator Nesting software Asper Basic on the CNC control ä12526

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 60 mm 215 mm 215 mm 3 1.5 kW 4 m/min 80x20 mm / 1200 mm; 40x10 120x25 mm / 600 mm; 50 x 50x50 mm / 800 mm; 20x20 Ø 50 mm / 800 mm; Ø 20 mm Ø 100x2 mm / 1600 mm; Ø 6 80x40x3 mm / 1400 mm; 40x 70x3 mm / 1600 mm; 40x2 m 70x70x7 mm / 1000 mm; 40x 70x70x7 mm / 1200 mm; 40x 1000 mm 1400 mm 1650 mm 950 kg 3 mech. driven rolls (brake motor) Ijdpfxjwiq S Ns Af Tsib hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES!