Vise

Hilma

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Nedpfxev Upvre Adwokt

Condition: as good as new (ex-display), Year of construction: 2025, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swivel diameter over cross slide 270 mm Swivel diameter in the bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle face CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kg Machine dimensions 2700 x 1080 x 1370 mm Accessories - 3 axis DRO - 3 jaw chuck - 4 jaw chuck - Faceplate - Tailstock - Cooling unit - 4-.fold toolholder - Splash guard - Chuck protection Nkedpfoxbzqqjx Adwot - Manual The lathe is in factory brand new condition. Showroom model. It is with 12 months of warranty in Hungary.

Condition: used, electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN Nodpfx Aodhclgedwekt -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 65 kg Njdpfx Aswbg N Ujdwskt span width: verstellbar mm *

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round Njdpfxjtt Nd Re Adwekt 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Condition: good (used), 1 used vise Manufacturer: Hilma Model: KNC 160 For horizontal clamping Clamping against fixed jaw Mechanically operated With mechanical-hydraulic force transmission With fully encapsulated spindle Jaw width: 160 mm Max. clamping force: 50 kN Nodpfjw Skgdjx Adwskt Max. clamping range: 436 mm Overall length: 594 mm Overall height: 115 mm

Condition: excellent (used), Extension for HILMA vice Nkjdpfxjnl Drze Adwet jaw width 160 mm Jaw width extension length of tie rod 560 mm Weight 21,5 kg

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid Nodefqpxijpfx Adwekt - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: excellent (used), Pull down jaws (28370) Make Hilma type BZT 160 3722-04 well suited for bright drawn material weight 3,5 kg Nksdpfx Aelrp N Hsdwjt

Condition: excellent (used), Hydraulic vice Hilma company Jaw width 200 mm jaw height. 65 mm maximum clamping width 440 mm total height 160 mm Njdpsk N A Dmsfx Adwjkt total length 1030 mm transport dimension : L.700 mm W.280 mm H.160 mm Weight 115 kg

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam Njdpjwki Apsfx Adwjkt - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, thickness of jaw 160 mm max. clamping width 240 mm ca. tension force 4,5 to high of jaw ca. 60 mm Nkodpfsumncdjx Adwst Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Fixed low special price. Machine dealer with own stock of 1600 m².

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm Nkedpfoxw Rdfsx Adwet - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Nedpfswk D Efex Adwokt Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: excellent (used), Year of construction: 2016, Hilma hydraulic clamping blocks 5x (VL125 clamping range S3 / length 430) + 2x (VL125 clamping range S3 / length 560) Nkodpfoxz Rguox Adwet