Dust collector, Suction 8900 m3h

Holzing RLA S300 (8900 m3)

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. - Semi-automatic bundle packer - Pneumatic piston - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Iedowth Dqspfx Abcehw Technical specifications Power supply: 380 V Output per minute: 10 bundles Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download data sheet

Condition: new, Year of construction: 2026, Technical specifications: • Extraction capacity ~ 5200 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G Ihedpfxod H Rf Tj Abcew • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System)

Year of construction: 2022, condition: new, angle: 0° - 90° Ihodpfxsi Ezr Ne Abcew max cutting length: 1370 mm

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Ihsdpfxjvuhume Abcjw Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 3.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 35 - 40 kg/h Blower air capacity, free blowing: 9.400 m³/hour Blow-out opening: Ø 700 mm Ihsdpfxodlhcrs Abcjw Flue pipe connection Ø 220 mm Weight: 1.950 kg SPS control cabinet: 380 Volt

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Isdpfx Absxc N Rhocohw Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger Ihsdpfx Absrvxn Iocow - Suitable for powder and granulate - Screw diameter: 35 mm

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Complete Ilapak packing line consisting of Ilapak multihued weigher mod WA 10/50 & Ilapak vertical bagging machine mod VT 2000 GF S whit a pipe diameter of 185 mm. Year of construction 2012 on both of the machines. Including cleaning platform for the scale hoppers. Isdoxl T Ayjpfx Abcohw

Condition: new, Year of construction: 2026, Edge Sander Description: Sanding of curved materials using a side table. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures horizontal and vertical operation. Additional table with adjustable height included as standard. Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Iedpfevuggzex Abcjhw Technical Data: Belt size: 2010 x 152 mm Worktable size: 790 x 221 mm Table height: 810 mm Stand height: 600 mm Additional rounding table size: 514 x 221 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Edge and face sanding at an angle: 0 - 45° Belt speed: 840 m/min Motor power: 1.1 kW Power supply: 400 V Weight: 75 kg The price quoted is the net price. It does not include transportation costs

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. Iedpfewgbw Rox Abcshw 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.