Automatic Loading Panel Saws

HOLZMA HPL 510/43/22

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Iodpfxew Uz Sps Ab Ioa Vacuum sheet loading: yes

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Iedsxfh Tmjpfx Ab Isa Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Iodpfxetq U A Ij Ab Isa

Year of construction: 2015, condition: reconditioned (used), The Lamina GL2200 gluing machine is designed for manual and semi-automatic gluing of cardboard packaging and POS materials. In the gluing process, two types of dispersion adhesives can be used: hot and cold. The machine uses both hot and dispersion adhesives. The machine is designed for manual feeding of cut materials and materials with precision grooves. The adhesive system applies adhesive to a predetermined length and position as the material passes through the workpiece. The pressure roller system ensures a perfect grip. The equipment's maximum working width is 2200 mm, which allows gluing large-format products. Thanks to the multi-functionality of the settings, the materials being glued can have different thicknesses. Material: Cardboard, corrugated cardboard; Maximum width: 2200mm. Technology: Semi-automatic gluing machine; Material type: Cuts. We sell only our own equipment. Can be completed with WS 2220 Working Station The Lamina Working Station is an option for the Lamina Gluer. The product is fed through the Gluer that will apply the programmed glue lines and continue into the Working Station where it is positioned on the vacuum belts. The second piece is mounted and positioned by using side lays and pneumatic stops for high quality finishing. The unit is adjustable to suit a range of products from single to multi part displays, boxes, large back Isdpfx Ajrb Aqpsb Ija supports, shelves and many more. Maximum Sheet Size: Width: 2200 mm

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Iodjq Auhdjpfx Ab Ioa Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: reconditioned (used), Year of construction: 2002, Longitudinal profiling machine for parquet 4+4 motors Minimum working width 80 mm Isdpfxovxz Sys Ab Ioa M+F profile

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) Ijdjt Hdh Nspfx Ab Isa With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Year of construction: 2021, condition: excellent (used), For sale: a professional, fully refurbished Graco E-10 hp spray foam machine. 6 months warranty The set includes: Ijdjtx Akzopfx Ab Iea Fully rebuilt E10hp 12-MONTH WARRANTY New electrically heated material hoses with temperature sensor, as used on large machines, 33m, high pressure Refurbished Graco Fusion PC with 2 new cartridges New hose heating control module If you are interested in purchasing the Graco E-10hp machine or would like more information, please contact me by phone or email. Additionally, we provide Graco servicing, Graco spare parts sales, and on-site servicing at the client's location. We are at your disposal for technical support or servicing needs. Highly recommended – I invite you to cooperate!

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 Ijdpfx Absqprk Te Ioa - Total connection: 45 kW

Condition: used, WRAVOR WRC 1050 AC – Power, Precision, and Reliability in Wood Processing Looking for a band saw that combines power, precision, and efficiency? The WRAVOR WRC 1050 AC delivers all that – and more! This horizontal band saw is designed for serious wood processing professionals, yet it remains a reliable and versatile solution even for smaller workshops. _____ Key Benefits: High Efficiency: Exceptional productivity with cutting capacity of up to 30 m³ in an 8-hour shift, with minimal energy consumption and low maintenance costs. Precise Cutting: Thanks to advanced technology and a stable construction, the WRAVOR WRC 1050 AC ensures clean and accurate cuts – even with the toughest types of wood. User-Friendly: Intuitive controls, fast installation, and easy adjustments make this saw ideal for both industrial applications and individual craftsmen. Iodpfx Abswfq Nao Ioa Versatility and Durability: Built from high-quality materials, this machine is capable of processing various wood types – from soft to hard, solid, or composite. Smart Technology: An innovative control system automatically adapts to different working conditions, saving both time and resources. Eco and Energy Efficient: Low energy consumption reduces operational costs while being environmentally friendly. _____ Specifications: • Model: WRC 1050 AC • Motor Power: 30 / 37 / 45 kW • Cutting Capacity: up to 30 m³ / 8h • Maximum Log Diameter: Ø 1050 mm • Applications: industrial wood processing, carpentry, cutting of pallets, beams, solid wood, and more _____ WRAVOR WRC 1050 AC – Your Partner in Every Cut! For more information or a quote, contact us today.