SCM s 52es thicknesser

SCM MiniMax s 52 es

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 72 mm Ndjdpfx Aaju N Slio Aod No of Grippers: 6

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW Ndodpfx Aeqy E Rlea Aed adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass Nodpfx Aasu Uh T Do Asdd - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm Nedpfxoqprk Ts Aa Asdd - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Nedpfx Aasi Hpk Uo Asdd Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: excellent (used), SCM S520E Class thicknesser Working width 520mm Working height 3-250mm 4 knife shaft Traditional knives 4 feed speeds: 5-8-12-19 m/min Electric lifting of the worktop CE certificate DTR documentation Nodsup Dkpopfx Aa Aedd 5.5kw main motor Suction nozzle diameter fi150mm Overall dimensions of the machine 110x110x115cmH Weight of the machine 760kg

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming CNC-driven Z-axis Working width 1200mm Working height max. 36mm Njdpjd Exwgjfx Aa Ajdd Available immediately

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg Ndjdpfxscqvhwj Aa Asd - available immediately -

Condition: new, Optimum OPTIdrill D 23Pro (400 V) special offer set bench drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and weights Length (product) approx. 680mm Column diameter 73mm Width/depth (product) approx. 350mm Height (product) approx. 1015mm Weight (net) approx. 63.5kg Drilling capacity Drilling capacity steel (S235JR) 25mm Continuous drilling capacity steel (S235JR) 20mm Drilling table Drilling table work surface length 280mm Drilling table work surface width 245mm Drilling table T-slot size 12mm Drilling table rotation 360 Drilling table inclination 45° Distance spindle - drilling table max. 425mm Speed range Speed range 200 - 2440min¯¹ Number of speed ranges 12 Electrical data Drive motor power 0.75kW Supply voltage 400V Mains frequency 50Hz Nodpfx Aot N Ivvja Asdd Machine base Distance spindle - machine base max. 618mm Machine foot working surface length 240mm Machine foot working surface width 250mm Machine foot T-slot size 16mm Machine foot T-slots quantity 2 Machine foot T-slot distance 170mm Spindle Quill stroke 80mm Spindle holder MK2 throat 180mm SCOPE OF DELIVERY Quick-action drill chuck 1 - 16 mm Morse taper MK 2/B16 T-nuts Machine vice BMP

Condition: excellent (used), SCM S520 thicknesser Working width 520mm Ndsdpfx Asitkx Eoa Asd Working height 250mm Feed speed adjustable: 4 steps Shaft with conventional knives 4 knife shaft Power 4kw Weight 670kg